Buffalo WZR-D1800H

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... 48, 49, 50
Author Message
BuffaloAddict
DD-WRT Novice


Joined: 18 Mar 2013
Posts: 9

PostPosted: Wed Oct 18, 2017 20:48    Post subject: Anyone with a working firmware patched against KRACKs ? Reply with quote
Hi all!

I have recently tried to update my Buffalo WZR-D1800H with firmware 09-27-2017-r33413 and 09-19-2017-r33375 and, in both tries, I got a pretty bricked router (recoverable through serial) and could install version r31825 again.

The question is, has anyone tried a patched KRACKs version of dd-wrt in this router ? I would not like to get a bricked router again.

Thanks!!
Sponsor
kooper2013
DD-WRT User


Joined: 10 Jan 2013
Posts: 74
Location: DE

PostPosted: Thu Oct 19, 2017 18:09    Post subject: Re: Anyone with a working firmware patched against KRACKs ? Reply with quote
BuffaloAddict wrote:
Hi all!

I have recently tried to update my Buffalo WZR-D1800H with firmware 09-27-2017-r33413 and 09-19-2017-r33375 and, in both tries, I got a pretty bricked router (recoverable through serial) and could install version r31825 again.

The question is, has anyone tried a patched KRACKs version of dd-wrt in this router ? I would not like to get a bricked router again.

Thanks!!


At least the WLI-H4-D1300 (nearly the same as the D1800) works with
v3.0-r33525 giga (10/17/17)/Linux 3.10.107 #16308 Tue Oct 17 10:27:13 CEST 2017 mips
in plain CB-mode, no fancy stuff.

Previous was
v3.0-r33492 giga (10/10/17)/Linux 3.10.107 #16248 Tue Oct 10 14:12:29 CEST 2017 mips

Never tried r33413 nor r33375 because several models got bricked at that time.

Usual precautions apply:
-d/l updates twice using 2 different ways and compare checksums, to avoid flashing bad images
-I'm using the InternetExplorer always, Firefox failed few times in past (didn't try again yet)
-ensure router is working properly
-use LAN, avoid WiFi
-and remember: DD-WRT is beta. All is on your own risk.

Go ahead, no risk, no fun.
BTW, KRACK is not completely fixed in r33525.

_________________
3xBuffalo WLI-H4-D1300
1xBuffalo WZR-D1800H
1xBuffalo WHR-HP-G300N
1xBuffalo WHR-1166D (stock f/w)
1xAsus RT-AC87U
1xAsus RT-AC88U
1xTP710
BuffaloAddict
DD-WRT Novice


Joined: 18 Mar 2013
Posts: 9

PostPosted: Fri Oct 20, 2017 5:42    Post subject: Re: Anyone with a working firmware patched against KRACKs ? Reply with quote
Thanks kooper2013!

I will try to update as you say. Many thanks for your help. javascript:emoticon('Wink')

kooper2013 wrote:
BuffaloAddict wrote:
Hi all!

I have recently tried to update my Buffalo WZR-D1800H with firmware 09-27-2017-r33413 and 09-19-2017-r33375 and, in both tries, I got a pretty bricked router (recoverable through serial) and could install version r31825 again.

The question is, has anyone tried a patched KRACKs version of dd-wrt in this router ? I would not like to get a bricked router again.

Thanks!!


At least the WLI-H4-D1300 (nearly the same as the D1800) works with
v3.0-r33525 giga (10/17/17)/Linux 3.10.107 #16308 Tue Oct 17 10:27:13 CEST 2017 mips
in plain CB-mode, no fancy stuff.

Previous was
v3.0-r33492 giga (10/10/17)/Linux 3.10.107 #16248 Tue Oct 10 14:12:29 CEST 2017 mips

Never tried r33413 nor r33375 because several models got bricked at that time.

Usual precautions apply:
-d/l updates twice using 2 different ways and compare checksums, to avoid flashing bad images
-I'm using the InternetExplorer always, Firefox failed few times in past (didn't try again yet)
-ensure router is working properly
-use LAN, avoid WiFi
-and remember: DD-WRT is beta. All is on your own risk.

Go ahead, no risk, no fun.
BTW, KRACK is not completely fixed in r33525.
Wink Wink Wink
thanhtungidt
DD-WRT Novice


Joined: 25 Oct 2017
Posts: 5

PostPosted: Wed Nov 15, 2017 19:33    Post subject: Re: Anyone with a working firmware patched against KRACKs ? Reply with quote
kooper2013 wrote:
BuffaloAddict wrote:
Hi all!

I have recently tried to update my Buffalo WZR-D1800H with firmware 09-27-2017-r33413 and 09-19-2017-r33375 and, in both tries, I got a pretty bricked router (recoverable through serial) and could install version r31825 again.

The question is, has anyone tried a patched KRACKs version of dd-wrt in this router ? I would not like to get a bricked router again.

Thanks!!


At least the WLI-H4-D1300 (nearly the same as the D1800) works with
v3.0-r33525 giga (10/17/17)/Linux 3.10.107 #16308 Tue Oct 17 10:27:13 CEST 2017 mips
in plain CB-mode, no fancy stuff.

Previous was
v3.0-r33492 giga (10/10/17)/Linux 3.10.107 #16248 Tue Oct 10 14:12:29 CEST 2017 mips

Never tried r33413 nor r33375 because several models got bricked at that time.

Usual precautions apply:
-d/l updates twice using 2 different ways and compare checksums, to avoid flashing bad images
-I'm using the InternetExplorer always, Firefox failed few times in past (didn't try again yet)
-ensure router is working properly
-use LAN, avoid WiFi
-and remember: DD-WRT is beta. All is on your own risk.

Go ahead, no risk, no fun.
BTW, KRACK is not completely fixed in r33525.


Dear Kooper2013,
Which build ddwrt is the best stable and best performance for Buffalo D1300/D1800? Could you give me some advice
kooper2013
DD-WRT User


Joined: 10 Jan 2013
Posts: 74
Location: DE

PostPosted: Sat Nov 18, 2017 16:27    Post subject: Re: Anyone with a working firmware patched against KRACKs ? Reply with quote
[quote="thanhtungidt"]
kooper2013 wrote:
BuffaloAddict wrote:


...


Dear Kooper2013,
Which build ddwrt is the best stable and best performance for Buffalo D1300/D1800? Could you give me some advice


This probably depends on what you do.
As client bridge r33525 works well, that's all I can say.

_________________
3xBuffalo WLI-H4-D1300
1xBuffalo WZR-D1800H
1xBuffalo WHR-HP-G300N
1xBuffalo WHR-1166D (stock f/w)
1xAsus RT-AC87U
1xAsus RT-AC88U
1xTP710
BuffaloAddict
DD-WRT Novice


Joined: 18 Mar 2013
Posts: 9

PostPosted: Sat Nov 18, 2017 16:43    Post subject: Re: Anyone with a working firmware patched against KRACKs ? Reply with quote
And with wpa2 krack corrected ? Thanks! Very Happy

[quote="kooper2013"]
thanhtungidt wrote:
kooper2013 wrote:
BuffaloAddict wrote:


...


Dear Kooper2013,
Which build ddwrt is the best stable and best performance for Buffalo D1300/D1800? Could you give me some advice


This probably depends on what you do.
As client bridge r33525 works well, that's all I can say.
thanhtungidt
DD-WRT Novice


Joined: 25 Oct 2017
Posts: 5

PostPosted: Tue Nov 21, 2017 14:06    Post subject: Re: Anyone with a working firmware patched against KRACKs ? Reply with quote
[quote="kooper2013"]
thanhtungidt wrote:
kooper2013 wrote:
BuffaloAddict wrote:


...


Dear Kooper2013,
Which build ddwrt is the best stable and best performance for Buffalo D1300/D1800? Could you give me some advice


This probably depends on what you do.
As client bridge r33525 works well, that's all I can say.




Did you do hard reset 30/30/30 on D1300 on build r33525? When I upgraded my D1300 completely, I could use it normally, after that I did hard reset it, it was bricked. I must downgrade my D1300 to lower build, then I can do hard reset normally
cuadedanh
DD-WRT Novice


Joined: 12 Jan 2018
Posts: 1

PostPosted: Thu Feb 01, 2018 1:32    Post subject: Reply with quote
could someone tell me recently BS stable build with krack fix?
charles1510
DD-WRT Novice


Joined: 18 Aug 2014
Posts: 2

PostPosted: Fri Apr 27, 2018 17:50    Post subject: Reply with quote
cuadedanh wrote:
could someone tell me recently BS stable build with krack fix?


Last build that works with tftp flashing on my WLI-H4-D1300 is r32170. I had problems with all other builds after. Sometimes router worked for a while after web upgrading from r32170 to newer one without resetting to default. After hard reset I coudn't connect to wifi (blinking wifi led), router doesn't boot or bootloop (solid or blinking red led).
adrianf0
DD-WRT Novice


Joined: 30 Mar 2015
Posts: 6

PostPosted: Fri Jun 29, 2018 2:21    Post subject: Reply with quote
Could someone share an image of CFE for Buffalo WZR-D1800H?

I accidentally bricked my router (CFE doesn't start now, no chance to use tftp anymore).
I imagine jTag is available on connector J4. Does anybody know the pinout of this connector? (I haven't found it on the web).
Does anybody succeed to unbrick the router via jTag?
BuffaloAddict
DD-WRT Novice


Joined: 18 Mar 2013
Posts: 9

PostPosted: Wed Nov 21, 2018 10:10    Post subject: New version working ? Reply with quote
Hi!

On:

https://dd-wrt.com/support/router-database/?model=WZR-D1800H%20(AC1750)_-

It says that current version usable for this router is 37305. Anyone has experiences with it ?

Thanks!
bushant
DD-WRT Guru


Joined: 18 Nov 2015
Posts: 1566
Location: WCentral Indiana USA

PostPosted: Wed Nov 21, 2018 14:39    Post subject: Re: New version working ? Reply with quote
BuffaloAddict wrote:
Hi!

On:

https://dd-wrt.com/support/router-database/?model=WZR-D1800H%20(AC1750)_-

It says that current version usable for this router is 37305. Anyone has experiences with it ?

Thanks!

FYI Router database is very rarely worth using. Latest firmware found from link below in white in my sig.

Check the New Build threads such as THIS for reports from anyone using your router.

_________________
STUBBY DoT install guide----Forum Guide Lines (Please read!) --- How to get help the right way----PIA Setup Guide by egc----
maduro
DD-WRT Novice


Joined: 24 Feb 2011
Posts: 12

PostPosted: Sun Dec 09, 2018 20:50    Post subject: Re: Anyone with a working firmware patched against KRACKs ? Reply with quote
[quote="kooper2013"]
thanhtungidt wrote:

This probably depends on what you do.
As client bridge r33525 works well, that's all I can say.


Hey guys, I am trying to upgrace my D1800H from my old v24 to r33525 but the upgrade is not taking. I select the .bin file and then it says it's upgrading but shortly after the status window reappears but with the old firmware version listed. Are there intermediary step upgrades I need to do? Question
maduro
DD-WRT Novice


Joined: 24 Feb 2011
Posts: 12

PostPosted: Sun Dec 09, 2018 22:23    Post subject: Re: Anyone with a working firmware patched against KRACKs ? Reply with quote
maduro wrote:

Hey guys, I am trying to upgrace my D1800H from my old v24 to r33525 but the upgrade is not taking. I select the .bin file and then it says it's upgrading but shortly after the status window reappears but with the old firmware version listed. Are there intermediary step upgrades I need to do? Question


UPDATE!!!

Guys I figured out how to upgrade my old Buffalo WZR-D1800H which had Kong v24-sp2 25015M-SP1. Here is the key....bin file upgrades did NOT work.... trx files DID!

I downloaded new trx firmware files from the DD-WRT FTP site. Instead of jumping from 25015 directly to the latest r37932. I did a step-up upgrade and it work perfectly. Here are the versions installed in the order below and remember to download the trx files.

ftp://ftp.dd-wrt.com/betas/2016/01-25-2016-r28942/buffalo_wzr-d1800h

ftp://ftp.dd-wrt.com/betas/2017/10-17-2017-r33525/buffalo_wzr-d1800h/

ftp://ftp.dd-wrt.com/betas/2018/12-08-2018-r37932/buffalo_wzr-d1800h/

Good Luck!!
Very Happy
Goto page Previous  1, 2, 3 ... 48, 49, 50 Display posts from previous:    Page 50 of 50
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum