Linksys Cisco EA2700 Serial Dump/CFE ect ect.

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... 30, 31, 32
Author Message
Mister X
DD-WRT Novice


Joined: 29 Oct 2009
Posts: 40
Location: Bucharest, Romania, HELL

PostPosted: Sat Apr 02, 2016 8:36    Post subject: Reply with quote
The previous build I was using, 29085, had some weird micro-disconnects for clients, the connection would randomly drop for half a second and then go back up.

I'm currently using 29387 and it seems to be solid so far.
My usage is somewhat light, though: PPPoE, DHCP, DDNS, VPN, some manual port forwards and also uPnP activated.

I've noticed that the newer builds start up with a much higher CPU load compared to the old ones, but in time it goes back to normal levels.

So for anyone looking for a newer build for this router, currently my recommendation is 29387.
As with all builds, you'll need to flash it from the original Linksys firmware.

_________________
I reject your reality and substitute my own.
Sponsor
KonG
DD-WRT Novice


Joined: 16 Apr 2016
Posts: 1

PostPosted: Sat Apr 16, 2016 19:07    Post subject: Reply with quote
Mister X wrote:
The previous build I was using, 29085, had some weird micro-disconnects for clients, the connection would randomly drop for half a second and then go back up.

I'm currently using 29387 and it seems to be solid so far.
My usage is somewhat light, though: PPPoE, DHCP, DDNS, VPN, some manual port forwards and also uPnP activated.

I've noticed that the newer builds start up with a much higher CPU load compared to the old ones, but in time it goes back to normal levels.

So for anyone looking for a newer build for this router, currently my recommendation is 29387.
As with all builds, you'll need to flash it from the original Linksys firmware.


Where could be found b29387? It's removed from FTP. Or, which another build still available have proofed stable?

Currently these releases are available on ftp:

01-02-2016-r28647/
01-13-2016-r28788/
01-16-2016-r28846/
01-19-2016-r28882/
01-25-2016-r28942/
01-27-2016-r28976/
02-01-2016-r29002/
02-05-2016-r29048/
02-09-2016-r29059/
02-15-2016-r29085/
02-17-2016-r29114/
02-19-2016-r29134/
02-23-2016-r29147/
03-02-2016-r29193/
03-07-2016-r29218/
03-17-2016-r29264/
03-21-2016-r29308/
03-22-2016-r29316/
03-25-2016-r29346/
03-28-2016-r29362/
04-04-2016-r29396/
04-05-2016-r29409/
04-11-2016-r29440/
Mister X
DD-WRT Novice


Joined: 29 Oct 2009
Posts: 40
Location: Bucharest, Romania, HELL

PostPosted: Tue Apr 19, 2016 9:23    Post subject: Reply with quote
I'm not quite sure why it was removed, but I've done another update (that I've forgotten to mention) to build 29409 and it's running smooth, so you should try that one from here.
_________________
I reject your reality and substitute my own.
jahf
DD-WRT Novice


Joined: 24 Jun 2009
Posts: 10

PostPosted: Tue May 03, 2016 0:25    Post subject: Reply with quote
Is the 5GHz radio not being activated something that can be addressed? If not, I'll just use 2.4, but getting my 5GHz back would be ... handy.
Malachi
DD-WRT Guru


Joined: 17 Jul 2012
Posts: 7214
Location: Columbus, Ohio

PostPosted: Tue May 03, 2016 1:24    Post subject: Reply with quote
jahf wrote:
Is the 5GHz radio not being activated something that can be addressed? If not, I'll just use 2.4, but getting my 5GHz back would be ... handy.


The 5thz radio is not supported and most likely never will be.

_________________
I am far from a guru, I'm barely a novice.
cshadow
DD-WRT Novice


Joined: 20 May 2012
Posts: 5
Location: Croatia

PostPosted: Thu Aug 04, 2016 22:17    Post subject: Reply with quote
Hi, what would be the latest stable version of DD-WRT for Linksys EA2700?
I have one of those with the newer "smart" firmware, didn't use it for a while and now would like to try DD-WRT.
Don't use 5GHz, but all my 2.4GHz wifi clients (a couple of android devices + one PC) connect at 65 Mbps. Is this normal?
Tried changing the channel and all options in the settings, nothing helps. I guess DD-WRT doesn't have this problem?
roypelli
DD-WRT Novice


Joined: 12 Aug 2016
Posts: 2

PostPosted: Wed Aug 17, 2016 16:09    Post subject: 5hgz wifi on Linksys EA2700 Reply with quote
I have a router Linksys EA6500 working fine using 5Ghz wifi on a ddwrt firmware.. I also have a router Linksys EA2700 that I want to use with ddwrt firmware..

Why is that 5Ghz is not supported on EA2700? Is there any hw limitation ?
ian5142
DD-WRT Guru


Joined: 23 Oct 2013
Posts: 2180
Location: Canada

PostPosted: Sun Aug 28, 2016 2:48    Post subject: No 5GHz Reply with quote
See my answer here: http://svn.dd-wrt.com/ticket/5521#comment:1
_________________
Before asking a question on the forums, update dd-wrt: Where do I download firmware? I suggest reading it all.

Some dd-wrt wiki pages are up to date, others are not. PM me if you find an old one, I am trying to update them.

Atheros:
Netgear R7800 - gateway, DHCP, QoS, VPN
TP-Link Archer C7 v2 x2 - WDS AP, WDS Station
TP-Link TL-WDR3600 v1 - WDS Station
TP-Link 841nd v8 - WDS Station
D-Link 615 C1 x 4 - not used
D-Link 615 E3 x 2 - not used
D-Link 825 B1 - WDS Station
D-Link 862L A1 x2 - WDS Station
Netgear WNDR3700v2 - WDS Station
UBNT loco M2 x2 - airOS

Broadcom
Asus N66U - backup Gateway
Netgear r6300 v1 - AP
Linksys E2500 - not used
Linksys EA2700 - not used
Linksys 160N v3 x2 - not used
Netgear WNDR3700v3 - not used
MediaTek
UBNT EdgeRouter X - not used
mysy
DD-WRT Novice


Joined: 16 May 2008
Posts: 2

PostPosted: Sat Sep 10, 2016 4:00    Post subject: Reply with quote
looks like the ea2700 is using a nand flash
mysy
DD-WRT Novice


Joined: 16 May 2008
Posts: 2

PostPosted: Sat Sep 10, 2016 4:59    Post subject: finial , i upgrade the ea2700 to dd-wrt Reply with quote
reset to default
download the classic FW, downgrade from newest FW to FW_EA2700_1.0.14.129982.SSA.

reset to default

use the classic E2700 gui to load dd-wrt-30605-ea2700.trx, wait about 1 mins

use com port to nvram erase , or you will not able to set the dd-wrt username and password.
you need erase nvram from linksys parameter setting.

and reboot the devive , you could see the



Snap10.jpg
 Description:
gui dd-wrt ea2700 linksys
 Filesize:  238.49 KB
 Viewed:  19047 Time(s)

Snap10.jpg


fewl
DD-WRT Novice


Joined: 02 Apr 2017
Posts: 1

PostPosted: Sun Apr 02, 2017 20:09    Post subject: 31791 Reply with quote
Hello everyone!
Is there any known issues with 31791?
lucas86
DD-WRT Novice


Joined: 16 Sep 2015
Posts: 19

PostPosted: Mon Aug 07, 2017 23:33    Post subject: Reply with quote
I followed the guide... https://haeberling.blogspot.com/2014/11/installing-dd-wrt-on-linksys-ea2700.html Rolling Eyes Crying or Very sad

And after hours of trying, the router was rejecting to install the ddwrt firmware, the solution was so fuc... simple, Laughing just get the latest linksys firmware, wait the router to boot after a normal reset (10sec) and then update directly the .trx file. Done! Very Happy

_________________
Linksys WRT54GL v1.1 --- (r14929-std)-RETIRED
Linksys EA2700 v1 --- (r29409)
TP-Link WR841N v9.3 --- (r27506)
TP-Link WDR4300 v1.7 --- (r26622)
lyubomirv
DD-WRT Novice


Joined: 16 Feb 2019
Posts: 3

PostPosted: Sun Feb 17, 2019 21:03    Post subject: Reply with quote
Hi guys!

I've just recently installed DD-WRT for the first time, and flashed r37305. I had an issue with the Wireless and so I updated to the lates Beta I could find in the FTP - r38581. Still the same issue.

The problem is that from time to time, Internet access via Wireless just stops working - I remain connected to the router (as I see a strong signal in the tray area) but attempting to load any web page hangs and timeouts. Until I manuall re-connect the Wireless connection. Then it is immediatelly fixed.

I've explained the problem in more detail in this topic: https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1156844#1156844

If anyone knows anything about this or has any ideas, please share! Smile
Goto page Previous  1, 2, 3 ... 30, 31, 32 Display posts from previous:    Page 32 of 32
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum