Build 18687 released

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next
Author Message
Exordium
DD-WRT Novice


Joined: 13 Feb 2008
Posts: 24

PostPosted: Fri Mar 09, 2012 10:16    Post subject: Reply with quote
Missing WiFi/WLAN Config Tab on Netgear WND3700v2.

Tested on 2 devices.
One was updated from r17xxx without ereasing of settings, the other one with ereased settings, tftp'ed r18687 factory.img and 30/30/30 reboot.

WiFi LED's 2.4 and 5 GHz are not flashing, also no WLAN config section on DD-WRT Web-GUI.
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Fri Mar 09, 2012 12:38    Post subject: Reply with quote
after bootup. gimme

Code:
dmesg

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
Jorge Silva
DD-WRT User


Joined: 29 Jan 2010
Posts: 113
Location: Aveiro, Portugal

PostPosted: Fri Mar 09, 2012 13:06    Post subject: Reply with quote
so this now supports adsl routers?



just 1 at the moment.


not true.
more than this. right now 4 devices are supported.




P.S Where can we get a list of DD-Wrt supported ADSL routers?

_________________
»»» Marooned »»» by Pink Floyd
deathnite
DD-WRT User


Joined: 11 Nov 2008
Posts: 130

PostPosted: Fri Mar 09, 2012 13:44    Post subject: Reply with quote
Works great. Thanks.

root@DD-WRT:~# uname -a
Linux DD-WRT 3.2.9-svn18668 #1113 Thu Mar 8 05:28:07 CET 2012 mips GNU/Linux
root@DD-WRT:~# nvram get DD_BOARD
Linksys WRT160NL

_________________
▲ ACTIVE ▲
[Broadcom ARM64] ASUS RT-AC86U v? --802.11ac wave 2-- RT-AC86U Thread | ASUSWRT-Merlin 384.18-Kernel-4.1.27

▼ INACTIVE ▼
[Broadcom ARM] ASUS RT-AC56U v2.00 --802.11ac-- dd-wrt v24-SP2-r23919 | RT-AC56U Thread | ASUSWRT-Merlin 384.6-Kernel-2.6
[Atheros MIPS] Linksys WRT160NL v1.0 --802.11n-- dd-wrt v24-SP2-r20675 | WRT160NL Thread | OpenWrt Barrier Breaker 14.07 r40477-Kernel-3.10
cullons
DD-WRT Novice


Joined: 12 Oct 2011
Posts: 24

PostPosted: Fri Mar 09, 2012 13:51    Post subject: No found usb disck Reply with quote
Información del disco
--- /dev/discs/disc0/disc
Block device, size 698.6 GiB (750156374016 bytes)
DOS/MBR partition map
Partition 1: 698.6 GiB (750153367552 bytes, 1465143296 sectors from 2048)
Type 0x07 (HPFS/NTFS)
Status: Not mounted - Unsupported file system or disk not formated


No fount usb hard disck????
help please..??

Thanks!! Sad
jmfolcik
DD-WRT User


Joined: 06 Nov 2010
Posts: 125

PostPosted: Fri Mar 09, 2012 15:40    Post subject: DIR615-E3 Reply with quote
I get a simple "upgrade failed." message after trying to update over both IE and Chrome, where I've used them for the existing version I'm running (previous latest)

DIR-615 E3

////UPDATE. My download was incomplete. Worked just fine when I redownloaded. I think the site was bogged down yesterday and somehow the download finished but was only 500kb.


Last edited by jmfolcik on Sat Mar 10, 2012 16:20; edited 1 time in total
cloggy
DD-WRT Novice


Joined: 19 Mar 2008
Posts: 39

PostPosted: Fri Mar 09, 2012 18:59    Post subject: Reply with quote
Upgraded my WNDR3700V1 from 18024 to 18678 (using the webgui) and I've seen that TX Power dropped from 27 to 20dBm. Played with some Wireless parameters, but TX power remains on 20dBm. I do not have the impression that wireless signal quality has a lower percentage so I leave it for now.

Wireless leds on the router are working again with this build.
aDEO
DD-WRT Novice


Joined: 07 Nov 2010
Posts: 12

PostPosted: Fri Mar 09, 2012 19:02    Post subject: Reply with quote
WHR-G300Nv2 flashed Ok. No issues so far.

--Edit--
When apply changes, which required restart the wireless AP disappear and the only solution is to manually restart the device.

--Edit2--
Fixed with next 3 changes:
- TX Antenna Chains = 1+3
- RX Antenna Chains = 1+2
- ACK Timing = 0

_________________
WNDR3700 Netgear F/W OpenWRT
WHR-300n2 Buffalo F/W DD-WRT
DAP-1160 D-Link F/W Stock v1.40


Last edited by aDEO on Sun Mar 11, 2012 12:00; edited 2 times in total
psandu.ro
DD-WRT Novice


Joined: 21 Nov 2011
Posts: 8

PostPosted: Fri Mar 09, 2012 19:17    Post subject: Reply with quote
cloggy wrote:
Upgraded my WNDR3700V1 from 18024 to 18678 (using the webgui) and I've seen that TX Power dropped from 27 to 20dBm. Played with some Wireless parameters, but TX power remains on 20dBm. I do not have the impression that wireless signal quality has a lower percentage so I leave it for now.

Wireless leds on the router are working again with this build.



18678 ?!?!?
last release is 18687.
omiez
DD-WRT User


Joined: 30 Sep 2011
Posts: 96

PostPosted: Fri Mar 09, 2012 19:21    Post subject: Reply with quote
Flashed on Tp-Link TL-WR841ND v7 and working like charm.
_________________
RT v24-sp2 (07/20/12) std - build 19519
TP-LINK TL-WDR4300 Open-Wrt Attitude Adjustment 12.09 Final
TP-LINK WR841ND V7 Open-Wrt Attitude Adjustment 12.09 Final
Valthos
DD-WRT Novice


Joined: 28 Jul 2010
Posts: 49

PostPosted: Fri Mar 09, 2012 19:26    Post subject: Reply with quote
Buffalo WBMR-HP-G300H

lan ports dead well there live but can not get a ip or pass any traffic.

high cpu load.

usb crashes the 2nd the drive spins causes router to go blank and fail to come back,
rumenn
DD-WRT Novice


Joined: 09 Mar 2012
Posts: 1

PostPosted: Fri Mar 09, 2012 19:36    Post subject: Reply with quote
i upgrate WNDR3700v1 from r17201 to r18687
everything looks normal


Last edited by rumenn on Sat Mar 10, 2012 7:07; edited 1 time in total
Exordium
DD-WRT Novice


Joined: 13 Feb 2008
Posts: 24

PostPosted: Fri Mar 09, 2012 19:38    Post subject: Reply with quote
Sash wrote:
after bootup. gimme

Code:
dmesg


Will do. Unfortunately have to wait until monday, because the devices are in my office.

Regards,
Exo
Valthos
DD-WRT Novice


Joined: 28 Jul 2010
Posts: 49

PostPosted: Fri Mar 09, 2012 19:41    Post subject: Reply with quote
<5>[ 0.000000] Linux version 3.2.9-svn18668 (root@dd-wrt) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #141 Thu Mar 8 04:20:24 CET 2012
<6>[ 0.000000] SoC: AR9 rev 1.2
<6>[ 0.000000] CPU revision is: 0001954c (MIPS 34Kc)
<6>[ 0.000000] Determined physical RAM map:
<6>[ 0.000000] memory: 04000000 @ 00000000 (usable)
<4>[ 0.000000] Zone PFN ranges:
<4>[ 0.000000] Normal 0x00000000 -> 0x00004000
<4>[ 0.000000] Movable zone start PFN for each node
<4>[ 0.000000] early_node_map[1] active PFN ranges
<4>[ 0.000000] 0: 0x00000000 -> 0x00004000
<7>[ 0.000000] On node 0 totalpages: 16384
<7>[ 0.000000] free_area_init_node: node 0, pgdat 80305cb0, node_mem_map 81000000
<7>[ 0.000000] Normal zone: 128 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 16256 pages, LIFO batch:3
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
<5>[ 0.000000] Kernel command line: console=ttyLTQ1,115200 root=1f03 rootfstype=squashfs noinitrd machtype=WBMR cp1_size=2M init=/sbin/init
<6>[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
<4>[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
<4>[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
<6>[ 0.000000] Writing ErrCtl register=00006a10
<6>[ 0.000000] Readback ErrCtl register=00006a10
<6>[ 0.000000] Memory: 61376k/65536k available (2495k kernel code, 4160k reserved, 593k data, 168k init, 0k highmem)
<6>[ 0.000000] NR_IRQS:256
<6>[ 0.000000] CPU Clock: 333MHz
<6>[ 0.000000] Calibrating delay loop... 221.18 BogoMIPS (lpj=1105920)
<6>[ 0.080000] pid_max: default: 32768 minimum: 301
<6>[ 0.080000] Mount-cache hash table entries: 512
<6>[ 0.080000] NET: Registered protocol family 16
<6>[ 0.090000] MIPS: machine is WBMR
<6>[ 0.130000] bio: create slab at 0
<7>[ 0.140000] pci 0000:00:0e.0: [168c:0029] type 0 class 0x000280
<7>[ 0.140000] pci 0000:00:0e.0: reg 10: [mem 0x00000000-0x0000ffff]
<7>[ 0.140000] pci 0000:00:0e.0: PME# supported from D0 D3hot
<7>[ 0.140000] pci 0000:00:0e.0: PME# disabled
<6>[ 0.140000] pci 0000:00:0e.0: BAR 0: assigned [mem 0x18000000-0x1800ffff]
<6>[ 0.140000] pci 0000:00:0e.0: BAR 0: set to [mem 0x18000000-0x1800ffff] (PCI address [0x18000000-0x1800ffff])
<6>[ 0.140000] NET: Registered protocol family 8
<6>[ 0.140000] NET: Registered protocol family 20
<6>[ 0.140000] Switching to clocksource MIPS
<6>[ 0.150000] NET: Registered protocol family 2
<6>[ 0.150000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.150000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
<6>[ 0.150000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.150000] TCP: Hash tables configured (established 2048 bind 2048)
<6>[ 0.150000] TCP reno registered
<6>[ 0.150000] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.150000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.150000] NET: Registered protocol family 1
<7>[ 0.150000] PCI: CLS 0 bytes, default 32
<5>[ 0.150000] gpio_proc: module loaded and /proc/gpio/ created
<6>[ 0.150000] gptu: totally 6 16-bit timers/counters
<6>[ 0.150000] gptu: misc_register on minor 62
<6>[ 0.150000] gptu: succeeded to request irq 126
<6>[ 0.150000] gptu: succeeded to request irq 127
<6>[ 0.150000] gptu: succeeded to request irq 128
<6>[ 0.150000] gptu: succeeded to request irq 129
<6>[ 0.150000] gptu: succeeded to request irq 130
<6>[ 0.150000] gptu: succeeded to request irq 131
<6>[ 0.150000] squashfs: version 3.0 (2006/03/15) Phillip Lougher
<6>[ 0.150000] msgmni has been set to 119
<6>[ 0.150000] io scheduler noop registered
<6>[ 0.150000] io scheduler deadline registered (default)
<6>[ 0.160000] ltq_asc.0: ttyLTQ0 at MMIO 0x1e100400 (irq = 104) is a ltq_asc
<6>[ 0.160000] ltq_asc.1: ttyLTQ1 at MMIO 0x1e100c00 (irq = 112) is a ltq_asc
<6>[ 0.460000] console [ttyLTQ1] enabled
<6>[ 0.470000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
<6>[ 0.480000] Amd/Fujitsu Extended Query Table at 0x0040
<6>[ 0.480000] Amd/Fujitsu Extended Query version 1.3.
<5>[ 0.490000] number of CFI chips: 1
<0>[ 0.490000] parse_mtd returns 0
<4>[ 0.490000] uImage size 10FC75
<5>[ 0.500000] Creating 8 MTD partitions on "ltq_nor":
<5>[ 0.500000] 0x000000000000-0x000000040000 : "uboot"
<5>[ 0.510000] 0x000000040000-0x000000060000 : "uboot-env"
<5>[ 0.520000] 0x000000060000-0x000000170000 : "kernel"
<4>[ 0.520000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
<5>[ 0.540000] 0x000000170000-0x000001080000 : "rootfs"
<4>[ 0.540000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
<5>[ 0.550000] mtd: partition "rootfs" set to be root filesystem
<5>[ 0.560000] 0x000001f40000-0x000001f60000 : "nvram"
<5>[ 0.570000] 0x000001fe0000-0x000002000000 : "board_config"
<5>[ 0.570000] 0x000000000000-0x000002000000 : "fullflash"
<5>[ 0.580000] 0x000001080000-0x000001f40000 : "ddwrt"
<5>[ 0.590000] Creating 1 MTD partitions on "ltq_nor":
<5>[ 0.590000] 0x000000060000-0x000001f40000 : "linux"
<6>[ 0.600000] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.600000] tun: (C) 1999-2004 Max Krasnyansky
<6>[ 0.610000] PPP generic driver version 2.4.2
<6>[ 0.610000] PPP BSD Compression module registered
<6>[ 0.620000] PPP Deflate Compression module registered
<6>[ 0.620000] PPP MPPE Compression module registered
<6>[ 0.630000] NET: Registered protocol family 24
<7>[ 0.630000] Registered led device: soc:blue:movie
<7>[ 0.630000] Registered led device: soc:red:internet
<7>[ 0.630000] Registered led device: soc:green:internet
<7>[ 0.630000] Registered led device: soc:green:adsl
<7>[ 0.640000] Registered led device: soc:green:wlan
<7>[ 0.640000] Registered led device: soc:red:security
<7>[ 0.640000] Registered led device: soc:green:power
<7>[ 0.640000] Registered led device: soc:red:power
<7>[ 0.640000] Registered led device: soc:green:usb
<6>[ 0.640000] u32 classifier
<6>[ 0.640000] input device check on
<6>[ 0.640000] Actions configured
<6>[ 0.650000] Netfilter messages via NETLINK v0.30.
<6>[ 0.650000] nf_conntrack version 0.5.0 (959 buckets, 3836 max)
<4>[ 0.660000] nf_conntrack_rtsp v0.6.21 loading
<4>[ 0.660000] nf_nat_rtsp v0.6.21 loading
<6>[ 0.670000] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.670000] IPP2P v0.8.2 loading
<6>[ 0.670000] TCP bic registered
<6>[ 0.680000] TCP cubic registered
<6>[ 0.680000] TCP westwood registered
<6>[ 0.680000] TCP highspeed registered
<6>[ 0.690000] TCP hybla registered
<6>[ 0.690000] TCP htcp registered
<6>[ 0.690000] TCP vegas registered
<6>[ 0.700000] TCP veno registered
<6>[ 0.700000] TCP scalable registered
<6>[ 0.700000] TCP lp registered
<6>[ 0.710000] TCP yeah registered
<6>[ 0.710000] TCP illinois registered
<6>[ 0.710000] NET: Registered protocol family 17
<6>[ 0.720000] 8021q: 802.1Q VLAN Support v1.8
<6>[ 0.720000] searching for nvram
<6>[ 0.720000] nvram size = -2144578282
<6>[ 0.760000] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
<6>[ 0.770000] Freeing unused kernel memory: 168k freed
<6>[ 5.620000] ltq_mii: probed
<6>[ 5.840000] eth0: AR8316 switch driver attached.
<6>[ 5.860000] ar8316: Using port 4 as switch port
<6>[ 12.920000] eth0: attached PHY [Atheros AR8216/AR8316/AR8326] (phy_addr=0:00, irq=-1)
<6>[ 12.970000] IFX MEI Version 5.00.00
<6>[ 13.020000] ATM (A1) firmware version 1.0.19
<4>[ 13.020000] ifxmips_atm: ATM init succeed
<4>[ 13.180000]
<4>[ 13.180000]
<4>[ 13.180000] Infineon CPE API Driver version: DSL CPE API V3.24.4.4
<6>[ 13.810000] Compat-wireless backport release: compat-wireless-2012-02-23-9-g3e5b1f0
<6>[ 13.810000] Backport based on wireless-testing.git master-2012-02-27
<6>[ 14.020000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 14.440000] cfg80211: World regulatory domain updated:
<6>[ 14.440000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 14.450000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 14.460000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 14.470000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 14.480000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 14.480000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<4>[ 15.010000] PCI: Enabling device 0000:00:0e.0 (0000 -> 0002)
<7>[ 16.580000] ath: EEPROM regdomain: 0x0
<7>[ 16.580000] ath: EEPROM indicates default country code should be used
<7>[ 16.580000] ath: doing EEPROM country->regdmn map search
<7>[ 16.580000] ath: country maps to regdmn code: 0x3a
<7>[ 16.580000] ath: Country alpha2 being used: US
<7>[ 16.580000] ath: Regpair used: 0x3a
<7>[ 16.590000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
<7>[ 16.590000] Registered led device: ath9k-phy0
<6>[ 16.590000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xb8000000, irq=30
<6>[ 17.170000] cfg80211: Calling CRDA for country: US
<6>[ 17.190000] cfg80211: Regulatory domain changed to country: US
<6>[ 17.190000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 17.200000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[ 17.210000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[ 17.210000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 17.220000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 17.230000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 17.240000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[ 19.690000] NET: Registered protocol family 10
<6>[ 19.970000] IPv6 over IPv4 tunneling driver
<6>[ 20.110000] device br0 entered promiscuous mode
<6>[ 20.150000] using kernel STP
<6>[ 20.290000] device eth0 entered promiscuous mode
<6>[ 20.290000] br0: port 1(eth0) entering listening state
<6>[ 20.300000] br0: port 1(eth0) entering listening state
<6>[ 20.300000] device br0 left promiscuous mode
<6>[ 20.310000] ADDRCONF(NETDEV_UP): br0: link is not ready
<6>[ 20.330000] device br0 entered promiscuous mode
<6>[ 20.370000] device br0 left promiscuous mode
<6>[ 20.400000] device br0 entered promiscuous mode
<6>[ 20.670000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 20.720000] cfg80211: World regulatory domain updated:
<6>[ 20.720000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 20.730000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 20.740000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 20.750000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 20.760000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 20.760000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 20.780000] cfg80211: Calling CRDA for country: US
<6>[ 20.820000] cfg80211: Regulatory domain changed to country: US
<6>[ 20.820000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 20.830000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[ 20.840000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[ 20.850000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 20.850000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 20.860000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 20.870000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[ 25.400000] ADDRCONF(NETDEV_UP): ath0: link is not ready
<6>[ 25.440000] device ath0 entered promiscuous mode
<6>[ 25.440000] br0: port 2(ath0) entering listening state
<6>[ 25.440000] br0: port 2(ath0) entering listening state
<3>[ 30.340000] [DSL_BSP_Showtime 916]: Datarate US intl = 768000, fast = 0
<7>[ 31.160000] eth0: no IPv6 routers present
<6>[ 35.320000] br0: port 1(eth0) entering learning state
<6>[ 40.480000] br0: port 2(ath0) entering learning state
<6>[ 50.360000] br0: topology change detected, propagating
<6>[ 50.360000] br0: port 1(eth0) entering forwarding state
<6>[ 50.360000] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
<6>[ 55.520000] br0: topology change detected, propagating
<6>[ 55.520000] br0: port 2(ath0) entering forwarding state
Oleg_Andreych
DD-WRT Novice


Joined: 09 Mar 2012
Posts: 5

PostPosted: Fri Mar 09, 2012 20:25    Post subject: Reply with quote
DIR-825 flashed. Started fine. Wireless doesnt work, zero macs.
Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next Display posts from previous:    Page 2 of 8
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum