UMTS Modem MF652 (drei.at)

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC basierende Hardware
Goto page 1, 2  Next
Author Message
SirWaSe
DD-WRT Novice


Joined: 02 Feb 2012
Posts: 6
Location: Graz

PostPosted: Thu Feb 02, 2012 17:11    Post subject: UMTS Modem MF652 (drei.at) Reply with quote
Hallo,

wärs evtl. möglich den Support für das ZTE MF652 zu implementieren?
default
VID 19d2
PID 1520

target
VID 19d2
PID 1522

dmesg wrote:
<6>[ 58.580000] usb 1-1: new high speed USB device using ar71xx-ehci and address 2
<6>[ 58.730000] scsi0 : usb-storage 1-1:1.0
<5>[ 59.740000] scsi 0:0:0:0: CD-ROM ZTE Datacard CD-ROM 0001 PQ: 0 ANSI: 0
<4>[ 59.750000] sr0: scsi3-mmc drive: 0x/0x caddy
<6>[ 59.750000] Uniform CD-ROM driver Revision: 3.20
<7>[ 59.760000] sr 0:0:0:0: Attached scsi CD-ROM sr0
<5>[ 59.770000] scsi 0:0:0:1: Direct-Access ZTE Storage 0001 PQ: 0 ANSI: 0
<5>[ 59.780000] sd 0:0:0:1: [sda] Attached SCSI removable disk


Ich weiß net ob des hier'n Problem machen könnt, aber im Moment hab ich noch keinen AT-Befehl gefunden das CD-Rom zu deaktivieren.
Auf meinem Rechner macht das zumindest keine Probleme.

Beim händischen verbinden bekomm ich zumindest einen Fehler:
Quote:

root@WaSe:~# usb_modeswitch -v 19d2 -p 1520 -V 19d2 -P 1522 -M '5553424312345679000000000000061b000000020000000000000000000000'
libusb-compat error: usb_init: initialization failed!

Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
No devices in default mode or class found. Nothing to do. Bye.


lg Sir
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Thu Feb 02, 2012 18:38    Post subject: Reply with quote
upgrade 1st !
und
mach
Code:
lsusb -v
auf das device
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
SirWaSe
DD-WRT Novice


Joined: 02 Feb 2012
Posts: 6
Location: Graz

PostPosted: Thu Feb 02, 2012 20:01    Post subject: Reply with quote
hab ich vergessen zu schreiben, die Rev. 18024 ist bereits installiert

der Befehl lsusb -v lässt sich net ausführen, da kommt dann
Quote:
-sh: lsusb: not found


auf meinem Rechner kommt die Ausgabe:
Quote:
Bus 001 Device 005: ID 19d2:1520 ONDA Communication S.p.A.

Als Modem
Quote:
Bus 001 Device 006: ID 19d2:1522 ONDA Communication S.p.A.


stattdessen hab ich lsmod ausgeführt
Quote:

Module Size Used by
nf_nat_pptp 1264 0
nf_conntrack_pptp 3072 1 nf_nat_pptp
nf_nat_proto_gre 816 1 nf_nat_pptp
nf_conntrack_proto_gre 2320 1 nf_conntrack_pptp
bonding 71040 0
msdos 5648 0
vfat 7792 0
fat 39344 2 msdos,vfat
nls_utf8 816 0
nls_iso8859_2 3360 0
nls_iso8859_1 2848 0
nls_cp437 4368 0
nls_cp950 98464 0
nls_cp936 120592 0
nls_cp932 76768 0
etherip 4048 0
usblp 8288 0
ath9k 91792 0
ath9k_common 1216 1 ath9k
ath9k_hw 347600 2 ath9k,ath9k_common
ath 11600 3 ath9k,ath9k_common,ath9k_hw
mac80211 184272 1 ath9k
cfg80211 133648 2 ath9k,mac80211
compat 7408 3 ath9k,mac80211,cfg80211
usb_storage 32352 1
sr_mod 10256 1
sd_mod 21248 0
cdrom 29888 1 sr_mod
scsi_wait_scan 368 0
scsi_mod 66688 3 usb_storage,sr_mod,sd_mod
ehci_hcd 28512 0
usbcore 91856 3 usblp,usb_storage,ehci_hcd
ag7100_mod 10032 0
rtl8366rb 8576 0
rtl8366_smi 6048 1 rtl8366rb


kurz drauf hat sich folgendes wieder geändert
Quote:

usb_storage 32352 0
sr_mod 10256 0
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Tue Feb 07, 2012 16:26    Post subject: Reply with quote
http://svn.dd-wrt.com/ticket/2384
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7632

PostPosted: Tue Feb 07, 2012 19:08    Post subject: Re: UMTS Modem MF652 (drei.at) Reply with quote
SirWaSe wrote:


Beim händischen verbinden bekomm ich zumindest einen Fehler:
Quote:

root@WaSe:~# usb_modeswitch -v 19d2 -p 1520 -V 19d2 -P 1522 -M '5553424312345679000000000000061b000000020000000000000000000000'
libusb-compat error: usb_init: initialization failed!




vid and pid for usb_modeswitch are not decimal values, must be preceded with 0x !!

_________________
Kernel panic: Aiee, killing interrupt handler!
SirWaSe
DD-WRT Novice


Joined: 02 Feb 2012
Posts: 6
Location: Graz

PostPosted: Wed Feb 08, 2012 0:59    Post subject: Reply with quote
I just tested hex values with no result

Quote:
root@WaSe:~# usb_modeswitch -v 0x19d2 -p 0x1520 -V 0x19d2 -P 0x1522 -M '5553424312345679000000000000061b000000020000000000000000000000'
libusb-compat error: usb_init: initialization failed!

Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
No devices in default mode or class found. Nothing to do. Bye.


lg Sir

_________________
WR1043nd Rev. 18777
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7632

PostPosted: Wed Feb 08, 2012 4:01    Post subject: Reply with quote
Your problem may be the modeswitch string surrounded by a ` instead of a " or may be due to wrong target id.

latest usb_modeswitch data definitions has 19d2:1520 included but the switched id is 19d2:0142.

19d2:1522 is unknown to the usb_modeswitch but may be an id the stick can get using a different switch method/message.
Did you get that id from a Windows machine?

The ticket which Sash opened is currently useless, Brainslayer can not add support for the stick because not all needed info is given.

Here is an outline of steps you have to go through in order to gather all the needed info:

1. Make sure that usb core support is enabled in the router gui.

2. Check in dmesg that the OS has found the stick, it may be in storage mode or in modem mode.

3. If the stick is in storage mode then look for the usb_modeswitch entry in dmesg and check that the OS afterwards has found the new id.
If the modeswitch is not automatically invoked (that will happen if i is not yet supported by dd-wrt) , then invoke it manually and check in dmesg that the stick has switched to a new id.

The last step is dependent on success of those 3 steps!!

4. Find what interfaces the stick presents to the system now when it is in modem mode.
lsusb seems to be excluded in some builds/platforms (why Brainslayer?) but the info can be found by doing a

# cat /proc/bus/usb/devices

paste the whole output from the part relevant to the modem stick!

_________________
Kernel panic: Aiee, killing interrupt handler!
SirWaSe
DD-WRT Novice


Joined: 02 Feb 2012
Posts: 6
Location: Graz

PostPosted: Wed Feb 08, 2012 11:15    Post subject: Reply with quote
Thx for your fast reply.
The string I posted at first was that string I used with my ubuntu befor I added it to usb_modeswitch. Now I replaced the ' with " there where no change anywhere.

I know the missmatch of the pid thats a little bit strange because under windows I get pid 0x1521 in modem mode under my ubuntu system I get pid 0x1522. As far as I know, you can get the MF652 with differen FW versions. That MF652 stick from the provider drei.at does have the pid I wrote.

LOM wrote:
1. Make sure that usb core support is enabled in the router gui.

Is done, now I just activated all usb points (core, printer, storage, mount drive)

LOM wrote:
2. Check in dmesg that the OS has found the stick, it may be in storage mode or in modem mode.

The system gets my stick, see first post

Quote:
<6>[ 599.070000] usb 1-1: USB disconnect, address 2
<6>[ 604.800000] usb 1-1: new high speed USB device using ar71xx-ehci and address 3
<6>[ 604.960000] scsi1 : usb-storage 1-1:1.0
<5>[ 605.970000] scsi 1:0:0:0: CD-ROM ZTE Datacard CD-ROM 0001 PQ: 0 ANSI: 0
<4>[ 605.980000] sr0: scsi3-mmc drive: 0x/0x caddy
<7>[ 605.980000] sr 1:0:0:0: Attached scsi CD-ROM sr0
<5>[ 605.980000] scsi 1:0:0:1: Direct-Access ZTE Storage 0001 PQ: 0 ANSI: 0
<5>[ 606.000000] sd 1:0:0:1: [sda] Attached SCSI removable disk
<3>[ 606.070000] sr0: CDROM (ioctl) error, command: cdb[0]=0x4a 4a 01 00 00 10 00 00 00 08 00
<6>[ 606.080000] sr: Sense Key : 0x4 [current]
<6>[ 606.080000] sr: ASC=0x0 ASCQ=0x0
<3>[ 606.090000] sr0: CDROM (ioctl) error, command: cdb[0]=0x51 51 00 00 00 00 00 00 00 02 00
<6>[ 606.100000] sr: Sense Key : 0x4 [current]
<6>[ 606.110000] sr: ASC=0x0 ASCQ=0x0


LOM wrote:
3. If the stick is in storage mode then look for the usb_modeswitch entry in dmesg and check that the OS afterwards has found the new id.
If the modeswitch is not automatically invoked (that will happen if i is not yet supported by dd-wrt) , then invoke it manually and check in dmesg that the stick has switched to a new id.

Thats allready my problem, the system doesn't switch the mode. Unfortunately there's now device found.

LOM wrote:
# cat /proc/bus/usb/devices

I can't find a subfolders at /proc/bus.

If I plug the stick in, there must be anywhere a usb-device, isn't it? Can I install lsusb later or must it be activated at the compiling process?

lg Sir

_________________
WR1043nd Rev. 18777
SirWaSe
DD-WRT Novice


Joined: 02 Feb 2012
Posts: 6
Location: Graz

PostPosted: Mon Mar 12, 2012 16:47    Post subject: Reply with quote
Some news. After installing the latest rev.
Now my router can handle the UMTS-modem, but not correctly at all. After plugging in the modem, it wouldn't be switched correctly, I've to do it by cli.

Here some results by pluging in.

Quote:
root@WaSe:~# dmesg

<6>[ 656.240000] usb 1-1: new high-speed USB device number 2 using ar71xx-ehci
<6>[ 656.390000] scsi0 : usb-storage 1-1:1.0
<5>[ 657.390000] scsi 0:0:0:0: CD-ROM ZTE Datacard CD-ROM 0001
<4>[ 657.400000] sr0: scsi3-mmc drive: 0x/0x caddy
<6>[ 657.400000] cdrom: Uniform CD-ROM driver Revision: 3.20
<7>[ 657.410000] sr 0:0:0:0: Attached scsi CD-ROM sr0
<5>[ 657.410000] scsi 0:0:0:1: Direct-Access ZTE Storage 0001
<5>[ 657.430000] sd 0:0:0:1: [sda] Attached SCSI removable disk
<3>[ 657.670000] sr0: CDROM (ioctl) error, command: cdb[0]=0x4a 4a 01 00 00 10
<6>[ 657.670000] sr: Sense Key : 0x4 [current]
<6>[ 657.680000] sr: ASC=0x0 ASCQ=0x0
<3>[ 657.910000] sr0: CDROM (ioctl) error, command: cdb[0]=0x51 51 00 00 00 00
<6>[ 657.910000] sr: Sense Key : 0x4 [current]
<6>[ 657.920000] sr: ASC=0x0 ASCQ=0x0


Quote:
root@WaSe:~# cat /proc/bus/usb/devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.02
S: Manufacturer=Linux 3.2.9-svn18668 ehci_hcd
S: Product=Atheros AR91xx built-in EHCI controller
S: SerialNumber=platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=1520 Rev= 0.01
S: Manufacturer=ZTE
S: Product=MF652
S: SerialNumber=B0361AC8F9A1068AE2DBDF0A5864C81E1E959704
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms


So I can see my modem. So I switch it by myself and there's the correct change to modem mode. Moreover there are the 2 serials ports I need, ttyACM0 and ttyACM1.

Quote:
root@WaSe:~# usb_modeswitch -v 0x19d2 -p 0x1520 -V 0x19d2 -P 0x1522 -M '5553424312345679000000000000061b000000020000000000000000000000'

Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
Found devices in default mode or class (1)
Accessing device 002 on bus 001 ...
Using endpoints 0x01 (out) and 0x81 (in)
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("dummy")
OK, driver "dummy" detached

SCSI inquiry data (for identification)
-------------------------
Vendor String: ZTE
Model String: Datacard CD-ROM
Revision String: 0001
-------------------------

USB description data (for identification)
-------------------------
Manufacturer: ZTE
Product: MF652
Serial No.: B0361AC8F9A1068AE2DBDF0A5864C81E1E959704
-------------------------
Setting up communication with interface 0 ...
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x81
Resetting message endpoint 0x01
Error resetting endpoint: -99
Device is gone, skipping any further commands
-> Run lsusb to note any changes. Bye.


Quote:
root@WaSe:~# dmesg

<3>[ 729.520000] sr0: CDROM (ioctl) error, command: cdb[0]=0x51 51 00 00 00 00 00 00 00 02 00
<6>[ 729.520000] sr: Sense Key : 0x4 [current]
<6>[ 729.530000] sr: ASC=0x0 ASCQ=0x0
<4>[ 729.550000] usb 1-1: usbfs: process 6335 (usb_modeswitch) did not claim interface 0 before use
<6>[ 729.600000] usb 1-1: USB disconnect, device number 2
<6>[ 737.470000] usb 1-1: new high-speed USB device number 3 using ar71xx-ehci
<6>[ 737.620000] cdc_acm 1-1:1.1: ttyACM0: USB ACM device
<6>[ 737.640000] cdc_acm 1-1:1.3: ttyACM1: USB ACM device
<6>[ 737.670000] scsi1 : usb-storage 1-1:1.7
<5>[ 738.670000] scsi 1:0:0:0: CD-ROM ZTE Datacard CD-ROM 0001 PQ: 0 ANSI: 0
<4>[ 738.680000] sr0: scsi3-mmc drive: 0x/0x caddy
<7>[ 738.680000] sr 1:0:0:0: Attached scsi CD-ROM sr0
<5>[ 738.690000] scsi 1:0:0:1: Direct-Access ZTE Storage 0001 PQ: 0 ANSI: 0
<5>[ 738.700000] sd 1:0:0:1: [sda] Attached SCSI removable disk
<3>[ 738.900000] sr0: CDROM (ioctl) error, command: cdb[0]=0x51 51 00 00 00 00 00 00 00 02 00
<6>[ 738.900000] sr: Sense Key : 0x4 [current]
<6>[ 738.910000] sr: ASC=0x0 ASCQ=0x0



Quote:
root@WaSe:~# cat /proc/bus/usb/devices

T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=1d6b ProdID=0002 Rev= 3.02
S: Manufacturer=Linux 3.2.9-svn18668 ehci_hcd
S: Product=Atheros AR91xx built-in EHCI controller
S: SerialNumber=platform
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=1522 Rev= 0.01
S: Manufacturer=ZTE
S: Product=MF652
S: SerialNumber=B0361AC8F9A1068AE2DBDF0A5864C81E1E959704
C:* #Ifs=10 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=08 Prot=00 Driver=(none)
I: If#= 0 Alt= 1 #EPs= 0 Cls=02(comm.) Sub=08 Prot=00 Driver=(none)
I:* If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 5 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=(none)
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms
I:* If#= 6 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I: If#= 6 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=0b Prot=00 Driver=(none)
I:* If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I: If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms


Now my problem is I can't connect, whether automatically nor with the connect button at the WAN page (status-> WAN). That's the output there:

Quote:

Connection Type 3G/UMTS
Login Status Disconnected
Signal Status -40 DBm
Connection Uptime Not available
IP Address 0.0.0.0
Subnet Mask 0.0.0.0
Gateway 0.0.0.0
DNS 1
DNS 2
DNS 3


Is there anything I can check? Under Ubuntu I use ttyACM0 for connecting, can I force it via cli?

lg Sir

_________________
WR1043nd Rev. 18777
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7632

PostPosted: Wed Mar 14, 2012 10:45    Post subject: Reply with quote
SirWaSe wrote:


I know the missmatch of the pid thats a little bit strange because under windows I get pid 0x1521 in modem mode under my ubuntu system I get pid 0x1522. As far as I know, you can get the MF652 with differen FW versions. That MF652 stick from the provider drei.at does have the pid I wrote.



Some sticks gives a slightly different pid in switched mode depending on if there is a TF card inserted in the slot or not..

I have updated the ticket which Sash created with a pointer to this thread and have also "bumped" the ticket so Brainslayer notices the addition.

It needs to be added in the dd-wrt 3G lib in order to get an automatic usb_modeswitch and to get the right device assigned to the dial/connect script.

The device name is stored in the nvram variable 3gdata, check if it is pointing to your ttyACM device.
Default for unsupported modems is /dev/usb/tts/0 which you in such case have to change to /dev/ttyACM0 or maybe /dev/ttyACM1.

_________________
Kernel panic: Aiee, killing interrupt handler!
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 6981
Location: Dresden, Germany

PostPosted: Wed Mar 14, 2012 20:54    Post subject: Reply with quote
i implemented now the device as ACM device as described here
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7632

PostPosted: Sat Mar 17, 2012 3:42    Post subject: Re: UMTS Modem MF652 (drei.at) Reply with quote
SirWaSe wrote:

_________________
WR1043nd Rev. 18687



r18740 is released and has support for the MF652.
Feedback please!

_________________
Kernel panic: Aiee, killing interrupt handler!
SirWaSe
DD-WRT Novice


Joined: 02 Feb 2012
Posts: 6
Location: Graz

PostPosted: Tue Mar 20, 2012 16:17    Post subject: Reply with quote
Thx, nice job!! It works now Smile

Do you need anymore logs for looking if all works correct?

lg Sir

_________________
WR1043nd Rev. 18777
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7632

PostPosted: Wed Mar 21, 2012 13:24    Post subject: Reply with quote
SirWaSe wrote:
Thx, nice job!! It works now Smile

Do you need anymore logs for looking if all works correct?

lg Sir


Thanks but that is not needed, I just wanted to know that the stick can be put on the known working stick list.

_________________
Kernel panic: Aiee, killing interrupt handler!
TheAbalone
DD-WRT Novice


Joined: 19 Aug 2012
Posts: 4

PostPosted: Sun Aug 19, 2012 7:19    Post subject: Connection lost Reply with quote
Hello,

i want to use a Buffalo WZR-HP-AG300H in connection with a ZTE MF652. I used the latest dd-wrt build and i got internet connection.

Sometimes the internet connection is lost, but the LED's on the stick show connected. This sometimes happens after some hours, sometimes some seconds after router reboot. The internet connection can only be repaired by rebooting the router.
I never lost the connection during downloading...

Do you have any advice?

lg
Berni
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC basierende Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum