goncapires DD-WRT Novice Joined: 27 Dec 2011 Posts: 1
Posted: Tue Dec 27, 2011 15:00 Post subject: dd-wrt on thomson TG784n?
I've search around the forum and I didn't find any information about this router
This router is very popular in Portugal and its the most complete I ever saw.
- RAM 512MB - H5DU5162ETR-E3C
- FLASH 32MB / 256Mbit (16Mx16) - Intel JS28F256 M29EWL (http://www.arrownac.com/services-tools/design-tools/arrowedge/parts/2009/vol1/pdfs/numonyx_datasheet.pdf)
- 2x USB ports
- VOIP (2 ports)
I had my router locked so I look up for a JTAG and this is the information of the JTAG log (can be useful)
Pinout for this 8 pin JTAG :
Code: 8 - N/C (Diode missing to 3.3V)
7 - TDI
6 - TDO
5 - GND
4 - TMS
3 - TCK
2 - N/C (3.3V Pullup / Possible nTRST)
1 - N/C (resistor missing to 3.3V)
Code: brjtag1.9f_exe>brjtag -probeonly /showppb
Broadcom EJTAG Debrick Utility v1.9f-hugebird
Probing bus ... Done
Instruction Length set to 5
CPU assumed running under BIG endian
CPU Chip ID: 00000110001101011000000101111111 (0635817F)
*** Found a Broadcom manufactured BCM6358 REV 01 CPU ***
- EJTAG IMPCODE ....... : 00000000100000011000100100000100 (00818904)
- EJTAG Version ....... : 1 or 2.0
- EJTAG DMA Support ... : Yes
- EJTAG Implementation flags: R4k MIPS16 MIPS32
Issuing Processor / Peripheral Reset ... Done
Enabling Memory Writes ... Done
Halting Processor ... <Processor> ... Done
Clearing Watchdog ... Done
Loading CPU Configuration Code ... Skipped
Detecting Flash Base Address...
Read MPI register value : 1E00000C
MPI register show Flash Access Base Addr : 1E000000
Probing Flash at Address: 0x1E000000 ...
Detected Chip ID (VenID:DevID = 897E : 2201)
*** Found a CFI Compatiable Flash Chip from Intel
Flash Sector Protection type 0
*** REQUESTED OPERATION IS COMPLETE ***
Running dd-wrt on it could be fun
LOM DD-WRT Guru Joined: 28 Dec 2008 Posts: 7628
Posted: Sun Jan 01, 2012 15:03 Post subject:
The Broadcom BCM63xx family of cpu's is not supported in dd-wrt. _________________ Kernel panic: Aiee, killing interrupt handler!
munge83 DD-WRT Novice Joined: 30 Dec 2012 Posts: 2
Posted: Wed Jan 02, 2013 12:45 Post subject:
LOM wrote: The Broadcom BCM63xx family of cpu's is not supported in dd-wrt.
Will it bee supported in some future? Is someone working on that?
TCB13 DD-WRT Novice Joined: 06 Jun 2010 Posts: 38
Posted: Sat Jun 21, 2014 14:28 Post subject:
+1 for this routers. The wifi is actually very good (I'm surprised) and the hardware seems to be stable.
pedropt DD-WRT Novice Joined: 03 Jan 2013 Posts: 1
Posted: Thu Aug 06, 2015 21:20 Post subject:
New model have a different jtag port .
I made an image with the old model jtag port and description (credits for Steppen wolf), and the new circuit board of a more recent model that i want to jtag .
However , i am having some difficulties in identifying the jtag ports on the new circuit board .
I anyone here with more experience on this could give an help , that will be very appriciated .
the image :
msramalho DD-WRT Novice Joined: 16 Jan 2019 Posts: 1
Posted: Wed Jan 16, 2019 18:47 Post subject:
+1 for this