NEW Fractal BUILDS 17949 *CLOSED* Moving on to Devel Thread

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4 ... 10, 11, 12  Next
Author Message
PetervdM
DD-WRT User


Joined: 11 Jun 2009
Posts: 282
Location: EU

PostPosted: Wed Nov 16, 2011 16:53    Post subject: Reply with quote
thx for the new build fractal!
i'm still not able to mount my fat32 usb stick in these builds. it mounts in kong build 17865 E3000-E4200-usb-ftp-samba3-vpn-newd.bin , however its label is MNT and UUID="FEEE-5EBA", it doesn't mount on /mnt in the kong build, but on /tmp/mnt/disc0-part1 . the h/w path is /dev/scsi/host0/bus0/target0/lun0/part1 .
i need this storage badly, so i can 't keep the fractal build on my E4200. what can i do to troubleshoot and provide more info?

edit:
nevermind. i formatted the usb stick with ext2, and called it MNT. still no dice. only after naming it Mnt i succeeded. can't do that with fat32 as volume names are uppercase in windows ( what the heck, it's still dos underneath Confused )

_________________
now running tomato by shibby
E4200v1 cfe 2010.09.20.0


Last edited by PetervdM on Wed Nov 16, 2011 19:03; edited 1 time in total
Sponsor
lawleo
DD-WRT Novice


Joined: 17 Sep 2011
Posts: 25

PostPosted: Wed Nov 16, 2011 16:56    Post subject: Reply with quote
lawleo wrote:
after running 2 days... the router stop response now, I can't telnet and not reboot the router yet.

do I need to provide any information for u guys?

Belkin N600 HD router


I just restart the router... all the settings in nvram is gone......

so guys... make sure u backup the settings before try this build.
djroby19
DD-WRT Novice


Joined: 23 Dec 2009
Posts: 34
Location: Italy

PostPosted: Wed Nov 16, 2011 17:17    Post subject: Reply with quote
I was able to update the build starting over from the first flash-4200, and recommended and everything ok ...
I found a problem with this build 17902 Hurricane Configuring IPv6 does not work .. The build is 17893, and changed anything?

_________________
Buffalo WZR-HP-AG300H DD-WRT v24-sp2 (03/19/12) std - build 18777 + modem Digicom combo cx + Nas Synology DS-209 da 2 T + LG DP1W+ APC Back-UPS RS-Power Saving Back-UPS Pro 550 + switch Zyxel Gs105B + http://forum.emulesecurity.net/topic.asp?TOPIC_ID=3441


Last edited by djroby19 on Wed Nov 16, 2011 18:34; edited 1 time in total
lawleo
DD-WRT Novice


Joined: 17 Sep 2011
Posts: 25

PostPosted: Wed Nov 16, 2011 17:26    Post subject: Reply with quote
thx for the quick response and new build, just try.... but bad luck... this time still not work....here is the dmesg
====
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: configuration #1 chosen from 1 choice
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
device br0 entered promiscuous mode
device vlan1 entered promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
scsi 0:0:0:0: Direct-Access Generic USB Flash Disk 0.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 2048000 512-byte hardware sectors (1049 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0x0 [current]
: ASC=0x0 ASCQ=0x0
sd 0:0:0:0: [sda] 2048000 512-byte hardware sectors (1049 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb-storage: device scan complete
....
========

in the admin interface, it just show

Disk Info
Not available
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1243

PostPosted: Wed Nov 16, 2011 17:30    Post subject: Reply with quote
lawleo wrote:
thx for the quick response and new build, just try.... but bad luck... this time still not work....here is the dmesg
====
usb 1-2: new high speed USB device using ehci_hcd and address 2
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-2: configuration #1 chosen from 1 choice
SCSI subsystem initialized
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
br0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
device br0 entered promiscuous mode
device vlan1 entered promiscuous mode
device eth0 entered promiscuous mode
device eth1 entered promiscuous mode
scsi 0:0:0:0: Direct-Access Generic USB Flash Disk 0.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 2048000 512-byte hardware sectors (1049 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0x0 [current]
: ASC=0x0 ASCQ=0x0
sd 0:0:0:0: [sda] 2048000 512-byte hardware sectors (1049 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb-storage: device scan complete
....
========

in the admin interface, it just show

Disk Info
Not available


That was very helpful information... I will put the 17902 builds and fix this... thanks for the quick response.

-Fractal
ddwrtren
DD-WRT Novice


Joined: 16 Apr 2010
Posts: 7

PostPosted: Fri Nov 18, 2011 5:34    Post subject: Reply with quote
is build 17902 ready for download? Can't seem to find it in the thread.
mike5026
DD-WRT Novice


Joined: 28 Jul 2008
Posts: 3

PostPosted: Fri Nov 18, 2011 8:07    Post subject: Reply with quote
I had the 17902 build it kept making the router lose active feed and disconnect. It seems like it freezes the router then you would have to reboot it. Had to go back to 17893
djroby19
DD-WRT Novice


Joined: 23 Dec 2009
Posts: 34
Location: Italy

PostPosted: Fri Nov 18, 2011 20:16    Post subject: Reply with quote
Fractal why you withdrew the 17902 build? Rolling Eyes
_________________
Buffalo WZR-HP-AG300H DD-WRT v24-sp2 (03/19/12) std - build 18777 + modem Digicom combo cx + Nas Synology DS-209 da 2 T + LG DP1W+ APC Back-UPS RS-Power Saving Back-UPS Pro 550 + switch Zyxel Gs105B + http://forum.emulesecurity.net/topic.asp?TOPIC_ID=3441
hackitz
DD-WRT Novice


Joined: 07 Jan 2008
Posts: 47

PostPosted: Fri Nov 18, 2011 23:14    Post subject: Reply with quote
how are you backing up your settings, i enter all of mine manually, I do want to test these latest builds.
It's just a long process to re-enter all my settings.
I'm running kong right now.

mike5026 wrote:
I had the 17902 build it kept making the router lose active feed and disconnect. It seems like it freezes the router then you would have to reboot it. Had to go back to 17893
mike5026
DD-WRT Novice


Joined: 28 Jul 2008
Posts: 3

PostPosted: Sat Nov 19, 2011 3:34    Post subject: Reply with quote
I just enter mine manually as well.

hackitz wrote:
how are you backing up your settings, i enter all of mine manually, I do want to test these latest builds.
It's just a long process to re-enter all my settings.
I'm running kong right now.

mike5026 wrote:
I had the 17902 build it kept making the router lose active feed and disconnect. It seems like it freezes the router then you would have to reboot it. Had to go back to 17893
lawleo
DD-WRT Novice


Joined: 17 Sep 2011
Posts: 25

PostPosted: Sat Nov 19, 2011 5:07    Post subject: Reply with quote
djroby19 wrote:
Fractal why you withdrew the 17902 build? Rolling Eyes

I believe he withdraw it because that build not able to mount all usb drive.. 17893 at least can mount swap & fat32 partition

_________________
Belkin N600 Play Max HD F7D4301v1
djroby19
DD-WRT Novice


Joined: 23 Dec 2009
Posts: 34
Location: Italy

PostPosted: Sat Nov 19, 2011 5:48    Post subject: Reply with quote
lawleo wrote:
djroby19 wrote:
Fractal why you withdrew the 17902 build? Rolling Eyes

I believe he withdraw it because that build not able to mount all usb drive.. 17893 at least can mount swap & fat32 partition


Thanks for the info ..... lawleo Fractal hopefully release a new build as soon as possible Wink

_________________
Buffalo WZR-HP-AG300H DD-WRT v24-sp2 (03/19/12) std - build 18777 + modem Digicom combo cx + Nas Synology DS-209 da 2 T + LG DP1W+ APC Back-UPS RS-Power Saving Back-UPS Pro 550 + switch Zyxel Gs105B + http://forum.emulesecurity.net/topic.asp?TOPIC_ID=3441
djroby19
DD-WRT Novice


Joined: 23 Dec 2009
Posts: 34
Location: Italy

PostPosted: Sun Nov 20, 2011 9:36    Post subject: Bandwitch monitor Reply with quote
Hello Fractal're doing quite a lot of work .. I'd love if you include in the new build Bandwitch a nice monitor like this (http://csdprojects.co.uk/ddwrt/ orhttp://www.dd-wrt.com/phpBB2/viewtopic.php?t=81432&highlight=rflow+collector) what do you think? could be done?
Appearance hearing from you ..... thanks Very Happy

_________________
Buffalo WZR-HP-AG300H DD-WRT v24-sp2 (03/19/12) std - build 18777 + modem Digicom combo cx + Nas Synology DS-209 da 2 T + LG DP1W+ APC Back-UPS RS-Power Saving Back-UPS Pro 550 + switch Zyxel Gs105B + http://forum.emulesecurity.net/topic.asp?TOPIC_ID=3441
Lloyd
DD-WRT Novice


Joined: 29 Jun 2009
Posts: 10

PostPosted: Wed Nov 23, 2011 5:37    Post subject: Great work! Reply with quote
Just wanted to post a thanks to Fractal here, for continuing to work on this. It sounds like a lot of trouble going through the builds and troubleshooting data, but we all appreciate your efforts!
Rimsey
DD-WRT Novice


Joined: 24 Sep 2006
Posts: 29

PostPosted: Wed Nov 23, 2011 13:22    Post subject: Re: Great work! Reply with quote
Lloyd wrote:
Just wanted to post a thanks to Fractal here, for continuing to work on this. It sounds like a lot of trouble going through the builds and troubleshooting data, but we all appreciate your efforts!


I'll second that. Well done.
Goto page Previous  1, 2, 3, 4 ... 10, 11, 12  Next Display posts from previous:    Page 3 of 12
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum