[Fractal]

Good morning,

Wanted to say a special thanks to KONG, he is the MAN!!! he contributed the USB fix in this release.. Also wanted to say thanks to ascott from sputnik as well, as him and I have been working on this project for the last few weeks.

The NV60k releases are for E'Series Routers with NV60K flash like E2000/E3000/E3200/E4200 ECT...

the Non NV60k releases are for NON E'series router... Make sure you know your router before applying..
Hope everyone has had a good weekend.

EDIT 11/15: I have updated builds on page 2 hopefully fixing the remaining EXT2/3... Please

EDIT 11/28 - I believe I have fixed USB automount for all devices... I am attaching some bins for testing. Page 6


give feedback

-Fractal

[Fractal]

New bins page 6

[kt_haddock]

New USB-function, it works the following way.

By default all disks are mounted to /tmp/mnt/disc<num>_part<num>.
If a partition is labeled Optware it will be mounted to /opt, if it is labeled Jffs it is mounted to /jffs, if it is labeled Mnt it is mounted to /mnt.
The user can override this behaviour by supplying the uuid of a partition in the webinterface this will override default and mount by label strategy.
The webinterface allows to enable umounting via ses button.

I'm unsure if Fractal implemented all Kongs usb-code But if he did it's working that way.

[dc]

Seems to be working fine here on my E3000.. I'll report if there are any problems.

[djroby19]

Ok I also updated my E-4200 to 17893 mega thanks to Kong, and especially Fractal Ascott to advance this project ....... Thanks

[veritas]

three quick questions.

I had a WRT-600n, and exclusively used dd-wrt.

I just purchased an e4200, and noticed that the linksys firmware basically looks nearly exactly like the dd-wrt firmware pages, down to the tabs...

So three questions:
1. How is this build on the e4200? Are there any known limitations?
2. What, generally, is the benefit (other than the obvious lifetime support issue, since I'm sure linksys is just going to stop supporting it, if they haven't already).
3. dd-wrt.com itself seems to be static (no news since late 2010.) Other than this project, has dd-wrt kind of fallen apart?

Thanks!!

[SHoTTa35]

Whoa, nice! Thanks!

I was just talking about this the other day and bam, right in my lap. Seems wireless is running better for the 1hr so far that i've had it. Definitely less errors on wifi than before, only 16 and that was there on boot up. By now it would already be over 100-200.

Seems to be running fine but i'll leave judgement for 24hrs first.

Oh - running Mega on E4200.

[kayfam]

Wi-viz isn't working in this build, but if I understand correctly that's been a problem for a while. Other than that seems to be running fine on my E3000. I still need to give the wireless a good shakedown and I'll re post if I see anything worth mentioning.

[Taomyn]

How can we be certain that the interference value is getting set on boot?

I just installed this new build (dd-wrt.v24-17893_NEWD-2_K2.6_mega-nv60k) on my E4200, with a 30/30/30 before and after the firmware upgrade, and running these commands I see:

[mac913]

I have not done any new firmware updates since Build 15962.

When I try to update the e3000 from 15962 to this Build I get upgrade failed. I tried both nv60k builds same issue.

Do I need to load an older build 1st? If so which one for the e3000?

TIA!

[LOM]

First load an e2k-e3k build from either 16785 or 16994 which will give you nv60k compatibility, then update to any nv60k build version of your choice.

[youneeq]

Hey, hopefully I'm understanding how these rom builds work but 17893 should include add'l 3G/4G device support in the "mega" roms as well, right? (Still a DD-WRT noob.)

[djroby19]

So far everything ok on E-4200, unfortunately the problem is that the wifi 2.4 Under no cron wakes up only 5 MHz of bandwidth is active rules that I set these

# disable wifi (eg Monday to Friday at 01:30)
30 01 * * 1-5 root / usr / sbin / wl-i eth1 radio off
30 01 * * 1-5 root / usr / sbin / wl-i eth2 radio off
# enable wifi (eg Monday to Friday at 16:00)
30 16 * * 1-5 root / usr / sbin / wl-i eth1 radio on
30 16 * * 1-5 root / usr / sbin / wl-i eth2 radio on
# disable wifi (es.Dal Saturday to Sunday at 02:00)
0 02 * 0.6 * root / usr / sbin / wl-i eth1 radio off
0 02 * 0.6 * root / usr / sbin / wl-i eth2 radio off
# enable wifi (eg, from Saturday to Sunday at 07:00)
07 * 0.6 * 0 root / usr / sbin / wl-i eth1 radio on
07 * 0.6 * 0 root / usr / sbin / wl-i eth2 radio on

Can you help?
Thanks again ..... Fractal

[lawleo]

firmware used:dd-wrt.v24-17893_NEWD-2_K2.6_mega.bin

I did upgrade from 17084 and running optware before. Router function seem work fine but the usb automount seem not working after the update

here is the disk info
Disk 0:
--- /dev/scsi/host0/bus0/target0/lun0/disc
Block device, size 1000 MiB (1048576000 bytes)
DOS/MBR partition map
Partition 1: 512 MiB (536870912 bytes, 1048576 sectors from 2048)
Type 0x83 (Linux)
Ext4 file system
UUID 42770D79-761D-4D4E-8850-FC9021248904 (DCE, v4)
Volume size 512 MiB (536870912 bytes, 131072 blocks of 4 KiB)
Partition 2: 64 MiB (67108864 bytes, 131072 sectors from 1050624)
Type 0x82 (Linux swap / Solaris)
Linux swap, version 2, subversion 1, 4 KiB pages, little-endian
Swap size 63.99 MiB (67100672 bytes, 16382 pages of 4 KiB)
Partition 3: 423 MiB (443547648 bytes, 866304 sectors from 1181696)
Type 0x0B (Win95 FAT32)
FAT32 file system (hints score 5 of 5)
Volume size 422.2 MiB (442662912 bytes, 108072 clusters of 4 KiB)
Volume name ""
Mountpoints:
/dev/scsi/host0/bus0/target0/lun0/part1 mounted to /tmp/mnt/disc0-part1
/dev/scsi/host0/bus0/target0/lun0/part2 mounted to swap
/dev/scsi/host0/bus0/target0/lun0/part3 mounted to /tmp/mnt/disc0-part3

-------
the ext3 partition (part1) can't be mounted, I also try to do auto mount by UUID to /opt, it still fail to do so, it just show empty folder.

part of the dmesg
-------
scsi 0:0:0:0: Direct-Access Generic USB Flash Disk 0.00 PQ: 0 ANSI: 2
sd 0:0:0:0: [sda] 2048000 512-byte hardware sectors (1049 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: ioctl_internal_command return code = 8000002
: Sense Key : 0x0 [current]
: ASC=0x0 ASCQ=0x0
sd 0:0:0:0: [sda] 2048000 512-byte hardware sectors (1049 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb-storage: device scan complete

-------
root@router:/opt# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
none on /dev type devfs (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
ramfs on /tmp type ramfs (rw)
devpts on /dev/pts type devpts (rw)
devpts on /proc/bus/usb type usbfs (rw)
/dev/scsi/host0/bus0/target0/lun0/part3 on /tmp/mnt/disc0-part3 type vfat (rw,fmask=0022,dmask=0022,codepage=cp437,iocharset=utf8)
--------
any idea about this?

[kt_haddock]