Meraki MR16?

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
mrwolfster
DD-WRT Novice


Joined: 14 Aug 2011
Posts: 3

PostPosted: Sun Aug 14, 2011 22:36    Post subject: Meraki MR16? Reply with quote
Hello,

Does anyone know if there is / will be dd-wrt support for the Meraki MR16?

The Chipset is Atheros AR7161-BC1A

I've added some internal pics of the AP.

AP details:
http://meraki.com/lib/pdf/meraki_datasheet_MR16.pdf
FCC UDX-60012010

Thanks
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Mon Aug 15, 2011 19:33    Post subject: Reply with quote
do
http://www.dd-wrt.com/site/support/router-detection

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7632

PostPosted: Mon Aug 15, 2011 20:09    Post subject: Reply with quote
What is the marking on the 16-pin serial flash chip with the green dot? MX25L128 ?

Ram chips are 32MByte each so 64KByte in total.

_________________
Kernel panic: Aiee, killing interrupt handler!
mrwolfster
DD-WRT Novice


Joined: 14 Aug 2011
Posts: 3

PostPosted: Mon Aug 15, 2011 22:19    Post subject: Reply with quote
Hello Sash, I'm trying to hunt down more info but I'm finding it hard to find out detailed specs..

Hi LOM, Its MX25L12805DMI-20G (Pic attached) I belive its a 128M-BIT [x 1] CMOS SERIAL FLASH http://pdf1.alldatasheet.com/datasheet-pdf/view/267917/MCNIX/MX25L12805DMI-20G.html
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7632

PostPosted: Tue Aug 16, 2011 4:48    Post subject: Reply with quote
Atheros AR7161, 16MByte flash and 64MByte ram.
Dual radio dual band wifi.
It can be supported by dd-wrt but Brainslayer needs a donated board to do that.

I can not, after reading up on this accesspoint, understand why you would run dd-wrt on it.
It comes with a $650 price tag which is around $500 more than you pay for a soho router with the same hardware specs, the extra $500 is for Meraki's mesh and cloud software features which you would lose if you run dd-wrt on it..

Care to explain?

_________________
Kernel panic: Aiee, killing interrupt handler!
mrwolfster
DD-WRT Novice


Joined: 14 Aug 2011
Posts: 3

PostPosted: Tue Aug 16, 2011 17:01    Post subject: Reply with quote
Hi LOM,

I purchased it cheaply ($40) of eBay without realising it need a $300 subscription to use it! Sad

There seems to be a few cheap units on auction sites at the moment there's one on uk eBay http://www.ebay.co.uk/itm/Meraki-MR16-Cloud-Managed-Wireless-Access-Point-/250873942797?pt=UK_Computing_Networking_SM&hash=item3a6940930d#ht_250wt_294 for $10.

I just wanted to know if I could make use of the hardware with dd-wrt.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Thu Aug 18, 2011 8:23    Post subject: Reply with quote
add a serial connection and give us a bootlog.
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
kuhl
DD-WRT Novice


Joined: 26 Dec 2011
Posts: 1

PostPosted: Mon Dec 26, 2011 16:03    Post subject: Looking also Reply with quote
I too am searching for a way to run dd-wrt on one of these, I got mine free for watching an hour long demo. I would use their service (free for 3yrs) if after 3yrs there was a way to manage your device. But there are thousands of these out there, that in approx. 2 yrs are going to be faced with replacing with an alt, or ponying up $$$ to continue the cloud service.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Mon Dec 26, 2011 18:24    Post subject: Reply with quote
as lom said: donation needed
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
vysocan
DD-WRT Novice


Joined: 08 Oct 2012
Posts: 2

PostPosted: Mon Oct 08, 2012 12:38    Post subject: MR12 serial console Reply with quote
Probably to old thread, but I have similar only slower MR12. For home it would be much better to have DD-WRT. Here is the bootlog:

Code:
U-Boot 1.1.4-g0c3911dd (Mar  3 2011 - 17:08:51)

PB93 (ar7241 - Virian) U-boot
DRAM: 
sri
ar7240_ddr_initial_config(133): virian ddr1 init
#### TAP VALUE 1 = 0x2, 2 = 0x2 [0x0: 0x0]
64 MB
Top of RAM usable for U-Boot at: 84000000
Reserving 272k for U-Boot at: 83fb8000
Reserving 192k for malloc() at: 83f88000
Reserving 44 Bytes for Board Info at: 83f87fd4
Reserving 36 Bytes for Global Data at: 83f87fb0
Reserving 128k for boot params() at: 83f67fb0
Stack Pointer at: 83f67f98
Now running in RAM - U-Boot at: 83fb8000
id read 0x100000ff
flash size 16MB, sector count = 256
Flash: 16 MB
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
Fetching MAC Address from 0x83fe7ea0
Virian External MII mode MDC CFG Value ==> 6
: cfg1 0xf cfg2 0x7014
eth0 link down
eth0: 00:03:7f:e0:00:2a
ATHRSF1_PHY: PHY unit 0x0, address 0x4, ID 0xd04e,
ATHRSF1_PHY: Port 0, Neg Success
ATHRSF1_PHY: unit 0 port 0 phy addr 4
eth0 up
eth0
RESET is un-pushed
Hit any key to stop autoboot:  0
part0: Copying image to memory ... done.
part0: Checking sha1 (from 0x80060000 length 4355864) ... match
part0: sha1 calculated: 98da1ae203ddb734494bb4311c1fed1cfdf870b1
## Starting application at 0x80060000 ...
starting stage2
decompressing embedded kernel image 0x81a021b0(0x425545)
got osize 0ff7a10
....................done
starting linux
Booting AR7240(Python)...
[     0.000] Linux version 2.6.16.16-meraki-ar7100 (ralucam@b5station) (gcc version 4.5.3 (GCC) ) #2 Fri Sep 28 15:33:34 PDT 2012
[     0.000] flash_size passed from bootloader = -1
[     0.000] setting it to 16 anyway
[     0.000] CPU revision is: 00019374
[     0.000] Determined physical RAM map:
[     0.000]  memory: 04000000 @ 00000000 (usable)
[     0.000] Built 1 zonelists
[     0.000] Kernel command line: "console=ttyS0,115200 root=01:00 rd_start=0x80600000 rd_size=8388608 init=/sbin/init"
[     0.000] Primary instruction cache 64kB, physically tagged, 4-way, linesize 32 bytes.
[     0.000] Primary data cache 32kB, 4-way, linesize 32 bytes.
[     0.000] Synthesized TLB refill handler (20 instructions).
[     0.000] Synthesized TLB load handler fastpath (32 instructions).
[     0.000] Synthesized TLB store handler fastpath (32 instructions).
[     0.000] Synthesized TLB modify handler fastpath (31 instructions).
[     0.000] Cache parity protection disabled
[     0.000] PID hash table entries: 512 (order: 9, 8192 bytes)
[     0.000] Using 200.000 MHz high precision timer.
[     0.001] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[     0.002] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[     0.009] Memory: 47640k/65536k available (1443k kernel code, 17840k reserved, 352k data, 14552k init, 0k highmem)
[     0.032] Mount-cache hash table entries: 512
[     0.033] Checking for 'wait' instruction...  available.
[     0.035] unpacking initramfs....done in 0.175000
[     0.213] NET: Registered protocol family 16
[     0.214] PCI init:ar7240_pcibios_init
[     0.215] ar7240_pcibios_init(298): PCI CMD write: 0x356
[     0.226] Algorithmics/MIPS FPU Emulator v1.5
[     0.238] Returning IRQ 48
[     0.561] JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
[     0.562] Initializing Cryptographic API
[     0.563] io scheduler noop registered
[     0.564] io scheduler deadline registered (default)
[     0.608] Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
[     0.622] serial8250: ttyS0 at MMIO 0x0 (irq = 19) is a 16550A
[     0.664] AG7240: Length per segment 1536
[     0.665] AG7240: Max segments per packet 2
[     0.666] AG7240: Max tx descriptor count    200
[     0.667] AG7240: Max rx descriptor count    252
[     0.668] AG7240: fifo cfg 3 01f00140
[     0.669] AG7240CHH: Mac address for unit 0
[     0.670] AG7240CHH: 00:03:7f:ff:ff:ff
[     0.885] AG7240CHH: Mac address for unit 1
[     0.886] AG7240CHH: 00:03:7f:ff:ff:fe
[     1.115] tun: Universal TUN/TAP device driver, 1.6
[     1.116] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[     1.131] Creating 8 MTD partitions on "ar7100-nor0":
[     1.132] 0x00000000-0x00080000 : "Uboot & env"
[     1.174] 0x00080000-0x000a0000 : "board config"
[     1.216] 0x000a0000-0x000c0000 : "panic"
[     1.258] 0x000c0000-0x002c0000 : "storage"
[     1.300] 0x00fe0000-0x01000000 : "caldata"
[     1.329] 0x002c0000-0x007e0000 : "part1"
[     1.371] 0x00940000-0x00e60000 : "part2"
[     1.413] 0x00000000-0x01000000 : "ALL"
[     1.455] i2c /dev entries driver
[     1.470] NET: Registered protocol family 2
[     1.489] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[     1.490] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[     1.491] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[     1.492] TCP: Hash tables configured (established 4096 bind 4096)
[     1.493] TCP reno registered
[     1.494] TCP bic registered
[     1.495] NET: Registered protocol family 1
[     1.496] NET: Registered protocol family 17
[     1.497] ar7240wdt_init: Registering WDT success
[     1.516] Freeing unused kernel memory: 14552k freed
init started:  BusyBox v1.1.0 (2012.05.16-07:00+0000) multi-call binary

Please press Enter to activate this console. : sysctl: error: 'kernel.softlockup_panic' is an unknown key
: sysctl: error: 'kernel.hung_task_panic' is an unknown key
: sysctl: error: 'vm.panic_on_oom' is an unknown key
[     2.790] module load for dummy load 0.062000 init 0.061000 total 0.123000
[     2.896] ag7240_ring_alloc Allocated 3200 at 0x83186000
[     2.897] ag7240_ring_alloc Allocated 4032 at 0x831c8000
[     2.899] Virian CFG Value ==> 6
[     2.900] Virian MDC CFG Value ==> 6
[     2.901] ATHRSF1_PHY: athr_reg_init
[     2.902] Setting PHY...
[     2.903] ATHRSF1_PHY: Port 0, Neg Success
[     2.904] ATHRSF1_PHY: unit 0 phy addr 4 Not enabling interrupts in AR7242 yet...
[     2.983] ag7240_ring_alloc Allocated 3200 at 0x8101a000
[     2.984] ag7240_ring_alloc Allocated 4032 at 0x832ba000
[     2.986] Virian mac 1 CFG Value ==> 6
[     2.987] Virian MDC CFG Value ==> 6
[     2.988] ATHRS26: resetting s26
[     3.089] ATHRS26: s26 reset done
[     3.093] Setting PHY...
[     5.070] ath_hal: module license 'Proprietary' taints kernel.
[     5.125] ath_hal: 0.9.17.1 (AR5416, DEBUG, REGOPS_FUNC, PRIVATE_DIAG, WRITE_EEPROM, 11D, AH_SUPPORT_EEPROM_AR9287)
[     5.132] module load for ath_hal load 0.065000 init 0.007000 total 0.072000
[     5.412] ath_dfs: Version 2.0.0
[     5.412] Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved
[     5.413] module load for ath_dfs load 0.067000 init 0.001000 total 0.068000
[     5.574] ath_rate_atheros: Copyright (c) 2001-2005 Atheros Communications, Inc, All Rights Reserved
[     5.575] module load for ath_rate_atheros load 0.068000 init 0.001000 total 0.069000
[     5.782] wlan: 0.8.4.2 (Atheros/multi-bss)
[     5.783] module load for wlan load 0.114000 init 0.001000 total 0.115000
[     5.944] ath_spectral: Version 2.0.0
[     5.944] Copyright (c) 2005-2009 Atheros Communications, Inc. All Rights Reserved
[     5.945] SPECTRAL module built on Sep 28 2012 15:32:12
[     5.946] module load for ath_spectral load 0.068000 init 0.002000 total 0.070000
[     6.128] ath_dev: Copyright (c) 2001-2007 Atheros Communications, Inc, All Rights Reserved
[     6.129] module load for ath_dev load 0.088000 init 0.001000 total 0.089000
[     6.305] module load for proclikefs load 0.064000 init 0.000000 total 0.064000
Single synchronous check for reset
[     6.550] ath_pci: 0.9.4.5 (Atheros/multi-bss)
[     6.622] Overriding DFS domain with 1
[     6.624] DFS min filter rssiThresh = 18
[     6.625] DFS max pulse dur = 131 ticks
[     6.627] ath_descdma_setup: tx DMA map: a03a0000 (75776) -> 3a0000 (75776)
[     6.628] ath_descdma_setup: beacon DMA map: a12a7000 (2960) -> 12a7000 (2960)
[     6.629] ath_descdma_setup: rx DMA map: a3f90000 (37888) -> 3f90000 (37888)
[     6.694] wifi0: Atheros 9280: mem=0x10000000, irq=48 hw_base=0xb0000000 ver=0x80 rev=0x2
[     6.695] module load for ath_pci load 0.081000 init 0.145000 total 0.226000
[     7.078] module load for merakiclick load 0.268000 init 0.002000 total 0.270000
[     7.086] click: starting router thread pid 424 (83197880)
[     7.315] module load for pca9534 load 0.062000 init 0.061000 total 0.124000
[     7.484] wlan: mac acl policy registered
[     7.485] module load for wlan_acl load 0.063000 init 0.001000 total 0.064000
[     7.635] module load for wlan_ccmp load 0.043000 init 0.000000 total 0.043000
[     7.829] module load for wlan_scan_ap load 0.066000 init 0.000000 total 0.066000
[     8.002] module load for wlan_scan_sta load 0.066000 init 0.000000 total 0.066000
[     8.173] module load for wlan_tkip load 0.064000 init 0.000000 total 0.064000
[     8.344] module load for wlan_wep load 0.063000 init 0.000000 total 0.063000
[     8.513] module load for wlan_xauth load 0.062000 init 0.000000 total 0.062000

init-boot: boot 29 build 19-94893 board ar7100 mac 00:18:0A:21:A4:3D
: modules: Module: dummy  .text=0xc0053000 .data=0xc00534f0 .bss=0xc0053640
: modules: Module: ath_hal  .text=0xc00b2000 .data=0xc00f73a0 .bss=0xc00fae20
: modules: Module: ath_dfs  .text=0xc0066000 .data=0xc006ec40 .bss=0xc006edc0
: modules: Module: ath_rate_atheros  .text=0xc0060000 .data=0xc0063990 .bss=0xc0063d00
: modules: Module: wlan  .text=0xc0162000 .data=0xc01a2050 .bss=0xc01a39c0
: modules: Module: ath_spectral  .text=0xc008f000 .data=0xc0097f00 .bss=0xc0098080
: modules: Module: ath_dev  .text=0xc01a5000 .data=0xc01cdf30 .bss=0xc01ce320
: modules: Module: proclikefs  .text=0xc005c000 .data=0xc005d0e0 .bss=0xc005d220
: modules: Module: ath_pci  .text=0xc0107000 .data=0xc01139c0 .bss=0xc0113f80
: modules: Module: merakiclick  .text= .data= .bss=
: modules: Module: pca9534  .text=0xc009c000 .data=0xc009c770 .bss=0xc009cbc0
: modules: Module: wlan_acl  .text=0xc009e000 .data=0xc009ee30 .bss=0xc009ef80
: modules: Module: wlan_ccmp  .text=0xc0050000 .data=0xc0051c00 .bss=0xc0051d40
: modules: Module: wlan_scan_ap  .text=0xc00ac000 .data=0xc00ade10 .bss=0xc00adf60
: modules: Module: wlan_scan_sta  .text=0xc00a6000 .data=0xc00a87b0 .bss=0xc00a8900
: modules: Module: wlan_tkip  .text=0xc011c000 .data=0xc011ecd0 .bss=0xc011ee20
: modules: Module: wlan_wep  .text=0xc0122000 .data=0xc01234f0 .bss=0xc0123640
: modules: Module: wlan_xauth  .text=0xc0115000 .data=0xc0115230 .bss=0xc0115380
hsayre
DD-WRT Novice


Joined: 19 May 2013
Posts: 1

PostPosted: Sun May 19, 2013 23:02    Post subject: I know this is old, but I have a Meraki MR16 I can donate Reply with quote
I have a couple MR16s I could donate to get this done.
vysocan
DD-WRT Novice


Joined: 08 Oct 2012
Posts: 2

PostPosted: Thu May 23, 2013 6:39    Post subject: Re: I know this is old, but I have a Meraki MR16 I can donat Reply with quote
hsayre wrote:
I have a couple MR16s I could donate to get this done.


http://www.dd-wrt.com/site/community/donations
cyberic68
DD-WRT Novice


Joined: 31 Jan 2012
Posts: 5

PostPosted: Thu Jun 13, 2013 18:43    Post subject: Re: I know this is old, but I have a Meraki MR16 I can donat Reply with quote
vysocan wrote:
hsayre wrote:
I have a couple MR16s I could donate to get this done.


http://www.dd-wrt.com/site/community/donations



Hi if you could donate one MR16 it would greatly appreciated.

I have one unit at home, that is stored and does nothing, given my license is now expire.

Let us know if you have sent one

Thanks for you involvement in dd-wrt

Eric
mdphoenix
DD-WRT Novice


Joined: 04 Jun 2008
Posts: 7
Location: Baltimore, MD

PostPosted: Thu Aug 06, 2015 1:55    Post subject: Reply with quote
Did this ever get taken care of? I have an MR16 I'd like to get running with DD-WRT. If no one has donated, I may be able to get hold of another. If I do, I'll gladly send it in.
cyberic68
DD-WRT Novice


Joined: 31 Jan 2012
Posts: 5

PostPosted: Thu Aug 06, 2015 2:03    Post subject: Reply with quote
Please go ahead. I have a mr16 too, and I am being waiting for more than 2-3 years now

Thanks

Eric
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum