Posted: Sat Mar 10, 2012 6:10 Post subject: wnr2000 v3 file upload problem
Hello everyone: New to the forum and this router just picked it up v3 out of the box. Read the posts regarding Brainslayer's work. Initial instructions indicated to upload "wnr3000 v3", then wnr2000 na factory firmware, then the .bin file.
I wanted to make sure that the wnr3000 was not a typo as I was unable to find this image. I've tried to 30/30/30 method but not able to get a hard reset.
Upload attempt of the "wnr2000v3 factory image" found on the post-above. Upload fails and prompts to check file. Unable to get beyond this point. Any suggestions am I missing a step. Thanks so much for the reply.
Posted: Sat Mar 10, 2012 6:36 Post subject: Re: wnr2000 v3 file upload problem
slade3334 wrote:
Hello everyone: New to the forum and this router just picked it up v3 out of the box. Read the posts regarding Brainslayer's work. Initial instructions indicated to upload "wnr3000 v3", then wnr2000 na factory firmware, then the .bin file.
I wanted to make sure that the wnr3000 was not a typo as I was unable to find this image. I've tried to 30/30/30 method but not able to get a hard reset.
Upload attempt of the "wnr2000v3 factory image" found on the post-above. Upload fails and prompts to check file. Unable to get beyond this point. Any suggestions am I missing a step. Thanks so much for the reply.
I don't know where in this thread you find wnr3000 mentioned, this thread is about wnr2200 and not about wnr2000.
You can not use wnr2200 files on a wnr2000!! _________________ Kernel panic: Aiee, killing interrupt handler!
Posted: Sat Mar 10, 2012 19:08 Post subject: USB Not working
Hi, I am new in this forum,
Just flashed my WNR2200 with WNRWEBFLASH.BIN, Everything seems to me working, but cant get USB drive connect to the router. even when I connect usb drive no lights on router.
Posted: Sat Mar 10, 2012 23:05 Post subject: Re: wnr2000 v3 file upload problem
thats what I thought. I saw one of the earlier posts by brainslayer saying to use the wnr3000v3 but must have been a typo and a reason I did not find this file. Thank you for clarifying. Is there a workaround on using the webgui for uploading? I don't know if the problems is this method or user error on the required steps. Thanks again.
LOM wrote:
slade3334 wrote:
Hello everyone: New to the forum and this router just picked it up v3 out of the box. Read the posts regarding Brainslayer's work. Initial instructions indicated to upload "wnr3000 v3", then wnr2000 na factory firmware, then the .bin file.
I wanted to make sure that the wnr3000 was not a typo as I was unable to find this image. I've tried to 30/30/30 method but not able to get a hard reset.
Upload attempt of the "wnr2000v3 factory image" found on the post-above. Upload fails and prompts to check file. Unable to get beyond this point. Any suggestions am I missing a step. Thanks so much for the reply.
I don't know where in this thread you find wnr3000 mentioned, this thread is about wnr2200 and not about wnr2000.
You can not use wnr2200 files on a wnr2000!!
Posted: Mon Mar 12, 2012 10:17 Post subject: Re: JFFS2 option
noname3535 wrote:
Hello,
I just downloaded the firmware to DDWRT WNR2200 and it works fine, but I can not find the option to enable jffs2 in the web interface.
Will you implement this feature in this firmware?
thank you
No reason for jffs in routers that has a USB port, flash will be used for router firmware only.
You can get a 2 or 4GB USB flash stick for next to nothing.. _________________ Kernel panic: Aiee, killing interrupt handler!
hey found two bugs in this version, but the first is not conserved mode of the modem is always returned to the car, and the modem is switched off helps only restart.
