Adding 2nd WAN to Public Setup over Dynamic WAN Setup

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Advanced Networking
Author Message
wired
DD-WRT Novice


Joined: 08 Feb 2013
Posts: 1

PostPosted: Fri Feb 08, 2013 19:43    Post subject: Adding 2nd WAN to Public Setup over Dynamic WAN Setup Reply with quote
Hi guys,

I'm currently using the setup as described at:
http://www.dd-wrt.com/wiki/index.php/Public_Sub-Net_Over_Dynamic_WAN

I've recently gotten a second WAN (WAN2) connection (DHCP), and after scouring through the various 2nd/Dual WAN guides, can't figure out how to modify my current config to achieve the following:

1) Currently with the above setup as per the wiki, I have the WAN port to the existing WAN connection (WAN1), 2 ports to Public Subnet, 2 ports to LAN. I would like to change 1 LAN port to the new WAN2 uplink connection.

2) The LAN should be DHCP/NAT (as it is now) and change all LAN traffic (including Wifi) will be routed through WAN2 instead of WAN1.

3) LAN clients should be able to access public IP address (i.e, servers connected to the public subnet connection)

4) Eventually the ports should look like:
W: [WAN1 Uplink], 1: [Public Subnet via WAN1], 2: [Public Subnet via WAN1], 3: [LAN - outgoing via WAN2], 4: [WAN2 Uplink]...... WIFI: [LAN - outgoing via WAN2]

Anyone can help me out a little?

Cheers,
wired
Sponsor
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum