Build request for Tp-link TL-WR802N

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3, 4, 5, 6  Next
Author Message
genixm
DD-WRT Novice


Joined: 10 Apr 2014
Posts: 1

PostPosted: Thu Apr 10, 2014 7:41    Post subject: Build request for Tp-link TL-WR802N Reply with quote
Hi all, wonder if whether the tp-link TL-WR802N will support DD-WRT?

If not, will it be supported in the future?

Thanks Very Happy
Sponsor
Thireus
DD-WRT User


Joined: 12 Mar 2009
Posts: 93

PostPosted: Tue Dec 30, 2014 17:39    Post subject: Reply with quote
Bump!
_________________
www.DareYourMind.net
NHF
DD-WRT Novice


Joined: 07 Oct 2015
Posts: 1

PostPosted: Wed Oct 07, 2015 12:26    Post subject: Reply with quote
I'd like to see this supported too. I'm wanting it to be a WiFi client and AP so I can route traffic from all my devices over my VPN on hotel WiFi.
According to this ticket for openwrt, it's the same chipset as TL-WR841N(D) v9 which is supported.
I'd look at doing it myself, but honestly.. the build system is just a giant mess with no documentation. I'd probably be better off with OpenWrt for my use, at least they use buildroot and I've built new devices on it before.
KrypteX
DD-WRT Guru


Joined: 18 Jan 2014
Posts: 2410

PostPosted: Sun Nov 01, 2015 13:15    Post subject: Reply with quote
I've modified the header of the DD-WRT 29218 factory-to-ddwrt build intended for TL-WR841ND v9, so that it will flash on a TL-WR802N v1 or v2 running stock TP-Link firmware.
If the attached build works for you, it can be further updated with any newer-than-29218 webflash build for TL-WR841ND v9.


Disclaimer: I haven't tested the attached builds myself, so I'm not responsible in any way if you brick your router.
Please only flash this build if you know how to unbrick it.

Note: You must be logged in to be able to download the attachment. Don't forget to unpack the zip archive.

_________________
THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX

Testing BrainSlayer's DD-WRT build 31924 on various units:
NETGEAR : WNDR3800 WNDR3800CH WNDRMACv2 WNDRMACv1 WNR2200 WNR2000v3
TP-LINK : ArcherC7v3 WR1043NDv3 WR740Nv4 WR740Nv6 WR710Nv1 WR810Nv1 WA850REv1 WA901NDv3 WA901NDv4
D-LINK : DIR-862L DIR-615D2
ASUS : RT-N10 C1
VirtualBox : x86_64


Last edited by KrypteX on Wed Mar 16, 2016 12:33; edited 6 times in total
lazytrip
DD-WRT Novice


Joined: 29 Nov 2015
Posts: 1

PostPosted: Sun Nov 29, 2015 17:10    Post subject: Reply with quote
Seems to work, installed the initial firmware factory-to-ddwrt_27506_WR802Nv1.bin followed by an upgrade to ftp://ftp.dd-wrt.com/betas//2015/11-28-2015-r28374/tplink_tl-wr841ndv9/tl-wr841nd-webflash.bin.
neo42de
DD-WRT Novice


Joined: 13 Dec 2015
Posts: 1

PostPosted: Wed Dec 16, 2015 11:37    Post subject: Reply with quote
Hi,

I successfully flashed that version also. Unfortunately I ws not able to configure DD-WRT for my needs (AP mode für multiple client and also acting as wifi client to another AP with NAT for internet connection). Now I want to go back to the original firmware but there is no webrevert binary for this router. Is there a way to go back?

Thanks
CTXSi
DD-WRT User


Joined: 01 Dec 2011
Posts: 100

PostPosted: Sun Jan 17, 2016 22:04    Post subject: Reply with quote
@lazytrip How has DD-WRT been running for you on the tl-wr802n? Do any of the builds you have tried support a VPN client? I've read comments that the router doesn't have enough memory for VPN but this post suggests VPN can run on the sister router TL-WR841N: http://www.dd-wrt.com/phpBB2/viewtopic.php?p=905380#905382

@neo42de Were you able to revert to factory? There are instructions for the TL-WR841N available, not sure if they work on the TL-WR802N: https://www.weavweb.net/2015/06/11/tl-wr841n-v9-dd-wrt-to-oem-factory-firmware-to-gargoyle/
hesst
DD-WRT Novice


Joined: 13 Oct 2010
Posts: 20

PostPosted: Thu Jan 21, 2016 23:10    Post subject: Reply with quote
Hi,

when I try to load the firmware factory-to-ddwrt_27506_WR802Nv1.bin I get the following error
Code:
Error code: 18005
Upgrade unsuccessfully because the version of the upgraded file was incorrect. Please check the file name.


Firmware Version:
3.16.9 Build 151022 Rel.39085n
Hardware Version:
WR802N v1 00000000
GreyDoc
DD-WRT User


Joined: 04 Jun 2015
Posts: 392

PostPosted: Fri Jan 22, 2016 5:04    Post subject: Reply with quote
hesst wrote:
Code:
Error code: 18005
Upgrade unsuccessfully because the version of the upgraded file was incorrect. Please check the file name.


Firmware Version:
3.16.9 Build 151022 Rel.39085n
Hardware Version:
WR802N v1 00000000

you have the US version


Last edited by GreyDoc on Sat Mar 19, 2016 13:08; edited 2 times in total
hesst
DD-WRT Novice


Joined: 13 Oct 2010
Posts: 20

PostPosted: Fri Jan 22, 2016 18:16    Post subject: Reply with quote
GreyDoc wrote:

you have the US version, try this

Thanks, but I get the same error.
CTXSi
DD-WRT User


Joined: 01 Dec 2011
Posts: 100

PostPosted: Mon Jan 25, 2016 3:45    Post subject: Reply with quote
hesst wrote:
GreyDoc wrote:

you have the US version, try this

Thanks, but I get the same error.


This is a long shot, but the OpenWRT forum says the latest factory firmware for the WR841ND doesn't accept non-factory firmware name. Maybe the same thing is happening with the WR802N? Did you try to upgrade from the previous factory firmware, or change the DD-WRT filename?
https://wiki.openwrt.org/toh/tp-link/tl-wr841nd#installation

I'm not in a position to try myself today, but should be able to try tomorrow.
GreyDoc
DD-WRT User


Joined: 04 Jun 2015
Posts: 392

PostPosted: Mon Jan 25, 2016 6:03    Post subject: Reply with quote
CTXSi wrote:
hesst wrote:
GreyDoc wrote:

you have the US version, try this

Thanks, but I get the same error.


This is a long shot, but the OpenWRT forum says the latest factory firmware for the WR841ND doesn't accept non-factory firmware name. Maybe the same thing is happening with the WR802N? Did you try to upgrade from the previous factory firmware, or change the DD-WRT filename?
https://wiki.openwrt.org/toh/tp-link/tl-wr841nd#installation

Thanks for this information!


Last edited by GreyDoc on Sat Mar 19, 2016 13:09; edited 1 time in total
eveloson
DD-WRT Novice


Joined: 28 Jan 2016
Posts: 2

PostPosted: Sat Jan 30, 2016 6:06    Post subject: how my TP WR802n(CHhines version) upgrade this firmware Reply with quote
KrypteX wrote:
I've modified the header of the DD-WRT 27506 factory-to-ddwrt build intended for TL-WR841ND v9, so that it will flash on a TL-WR802N v1 running stock TP-Link firmware.
If the attached build works for you, it can be further updated with any newer-than-27506 webflash build for TL-WR841ND v9.


Disclaimer: I haven't tested the attached build myself, so I'm not responsible in any way if you brick your router.
Please only flash this build if you know how to unbrick it.

Because the web gui will check RSA instead of MD5,Thanks
hesst
DD-WRT Novice


Joined: 13 Oct 2010
Posts: 20

PostPosted: Sat Jan 30, 2016 17:59    Post subject: Reply with quote
CTXSi wrote:
Did you try to upgrade from the previous factory firmware

Error code: 18005

CTXSi wrote:
or change the DD-WRT filename?
https://wiki.openwrt.org/toh/tp-link/tl-wr841nd#installation

Error code: 18005
sisu13
DD-WRT Novice


Joined: 11 Dec 2015
Posts: 1

PostPosted: Sun Jan 31, 2016 0:45    Post subject: Reply with quote
hesst:

No guarantees as I am a noob. But I think that I came across a solution for you in the process of bricking and unbricking WR802Nv1.

1. Follow youtube video: https://www.youtube.com/watch?v=0k1sxwX5pMk
2. Download Firmware version: http://www.tp-link.us/res/down/soft/TL-WR802N_V1_150717.zip (Other firmware versions have the upgrade error that you mentioned)
3. As in video use IP 192.168.0.66 to TFTP.
4. Rename the firmware to "wr802nv1_tp_recovery.bin"
5. Plug the router into the ethernet and push in reset button for 3-4 seconds. (Make sure firewalls and antivirus turned off)

This is my one and only idea. I hope it helps. If not, I am out of ideas.

Best of luck
Goto page 1, 2, 3, 4, 5, 6  Next Display posts from previous:    Page 1 of 6
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum