I have createt a guest network according to the guide in the first topic. Everything works, but I have no internet access on guest. Multiple dhcp created for wl0.1.
Joined: 24 Feb 2013 Posts: 1634 Location: Belgrade
Posted: Sat Nov 28, 2015 9:50 Post subject:
Have you enabled NAT/Masquerade on Network configuraion wl0.1 (Basic/Networking tab)? Start with icmp echo (ping) and tracert google.com from guest client to see where the problem is...
I have attached two pictures about my setup.
WAN port is enabled. I have a wireless repeater with an ethernet port. This is connected to WAN of my WRT54gl.
I am not an expert in ddwrt. Could you help?
Posted: Tue Dec 01, 2015 14:51 Post subject: No luck with guest network - help needed :(
Hello all - DD-WRT noob here. I have tried the steps in both of these threads but am unable to connect to the guest network. the network is available but it always gets stuck trying to assign an IP.
Hi,
I followed this tutorial, but if I connect to the guest network there is no Internet access, IP is assigned OK, and I can't connect to clients on the main network.
If I create a bridge between ath0 and ath0.1 without changing any setting, I get Internet access, but I can also connect to clients on the main network.
The router is working as an access point, the WAN connection type is disabled, assign WAN port to switch checked. DHCP forwarding is enabled, but I also tried with DHCP off.