Posted: Sat Mar 03, 2018 6:11 Post subject: Asus rt-n12+ B1
Hi, can you describe how did you managed to change the firmware on rt-n12+ to padavan?
I am unable to do it over the web interface because it is not accepting it as a fw update. I am even unable to enter the rescue mode, it never flashes slowly always fast...
It has to do something with the wds/reset button it's one button on this model
Posted: Sat Mar 31, 2018 18:50 Post subject: Asus rt-n12E B1
I can confirm that Padavan for Asus RT-N11P works fine on RT-N12E B1 also. First update to nano (RT-N11P_188.8.131.52-099_nano.trx), then base (RT-N11P_184.108.40.206-099_base.trx). Configuration settings remains between those two.
Is this firmware supporting the Repeater Mode of the router ? I would like to try it out nonetheless but i simply can't find a way to flash, tried holding the WPS button and pluggin in, power led flashes but can't get into the GUI and tftp2 doesn't wanna flash either.
Router is RT N12+ B1, tried both through wifi and the cable with static ip.
type in your address bar 192.168.1.1 then administration tab choose firmware upgrade then choose the *.trx file then upload. After flashing go to Admistration tab Settings then reset NVRAM, if you like storage to.
I'm so happy there is padavan in RT-N12+, easier than ddwrt.
Thanks, I've tried that and it just rejects the firmware and throws a non genuine firmware ver. kinda message. When powering on in what seems to be recovery mode(power led flashing), the GUI isn't working via 192.168.1.1.