WNDR3700 V4
DD-WRT v3.0-r27745 std (08/25/15)
Linux 3.10.87 #7901 Tue Aug 25 03:49:01 CEST 2015 mips
Update live from previous
DD-WRT v3.0-r27734 std (08/24/15)
Linux 3.10.87 #7775 Mon Aug 24 03:31:09 CEST 2015 mips
Still has little bug same as previous builds --- Local DNS (assigned static leases access by name) not working until you 'Apply Settings'
The unbound.conf is not loading all 'local-data' at startup. Tried a few things thinking dnsmasqDNS was conflicting but does no good to
turn that off or turning off local DNS.
So I'm still using -
DNSMasq for DHCP
DNSMasq for DNS
DHCP-Authoritative
Recursive DNS Resolving
Forced DNS Redirection
Used Domain LAN & WLAN
Local DNS
No DNS Rebind
Query DNS in Strict Order
and hit 'Apply Settings' after reboot and it's working like a champ
I'm assuming you're filling in the assignments you want to make under Services / Services / Static Leases.
If that's right try diabling "Local DNS", which I think only refers to providing your own hosts file.
I've only been using it for 30 minutes, but... All devices on my network seem to connect and talk to each other just fine.(a lot of devices)I'll let ya know of any issues. I've been trying all of these "beta" updates for a while now. I think it's safe to say that you've got my router figured out.
WNDR3700 V4
DD-WRT v3.0-r27745 std (08/25/15)
Linux 3.10.87 #7901 Tue Aug 25 03:49:01 CEST 2015 mips
Update live from previous
DD-WRT v3.0-r27734 std (08/24/15)
Linux 3.10.87 #7775 Mon Aug 24 03:31:09 CEST 2015 mips
Still has little bug same as previous builds --- Local DNS (assigned static leases access by name) not working until you 'Apply Settings'
The unbound.conf is not loading all 'local-data' at startup. Tried a few things thinking dnsmasqDNS was conflicting but does no good to
turn that off or turning off local DNS.
So I'm still using -
DNSMasq for DHCP
DNSMasq for DNS
DHCP-Authoritative
Recursive DNS Resolving
Forced DNS Redirection
Used Domain LAN & WLAN
Local DNS
No DNS Rebind
Query DNS in Strict Order
and hit 'Apply Settings' after reboot and it's working like a champ
I'm assuming you're filling in the assignments you want to make under Services / Services / Static Leases.
If that's right try diabling "Local DNS", which I think only refers to providing your own hosts file.
Yes and tried that. Also tried disabling No DNS Rebind... and many other things.
All works perfect after a reboot if disable 'Recursive DNS Resolving'
... but I'm stubborn and I want to use it.
So it all works perfect after a reboot then an 'Apply Settings'
Yes and tried that. Also tried disabling No DNS Rebind... and many other things.
All works perfect after a reboot if disable 'Recursive DNS Resolving'
... but I'm stubborn and I want to use it.
So it all works perfect after a reboot then an 'Apply Settings'
Why do you want to use Recursive DNS Resolving?
I understand that it's not generally recommended.
Where are you enabling it? I can even find it in the dd-wrt on my WNDR3700v2.
Router: TPLink WR842ND v2.X
Firmware: DD-WRT v3.0-r27745 std (08/25/15)
Kernel: Linux 3.10.87 #7895 Tue Aug 25 03:26:48 CEST 2015 mips
Status: OK
Reset: NO
Errors: none
At first, no problems. But, reset button wouldn't work. Eventually, I lost connection to internet. Reset modem, reset router through web GUI, tried mac clone. Local Network fine, but still no internet. I wish I could give more info, I didn't have time to collect more data. My family went nuts without internet. I had to do something.
Thankfully I was able to revert to stock firmware with the file provided here. Everything's working now. But the stock firmware is garbage compared to dd-wrt. I'll wait for the next beta. Don't be discouraged, keep it up. You are doing great work.
Router: Dlink DIR632
Firmware: DD-WRT 20150825 r27745 beta
Old firmware: DD-WRT 20150506 r26839 beta
Kernel: Linux DD-WRT 3.10.87 #7867 Tue Aug 25 02:59:32 CEST 2015 mips GNU/Linux
Reset: No.
Errors: After firmware upgrade, could not access Web interface, and could not connect with SSH, yet it was working for LAN + Wifi internet access. Turning it off and on again made both the web interface and SSH start working again.
Fixes: A macbook was having trouble connecting to Wifi with the previous firmware (r26839) - that seems to be working again after the upgrade.
Unknown whether it should work as not: Using this unit as an access point & switch, but NOT the gateway, and would like to be able to block access to specific IP addresses for traffic passing through. Cannot seem to do this with either iptables or ebtables - iptables never worked, but ebtables used to (e.g. "ebtables -I FORWARD -p IPv4 --ip-destination 8.8.8.8/32 -j DROP "), but that's has not worked for a few months at least, including in this firmware version.
Router: WNDR4300v1
Firmware: DD-WRT v3.0-r27745 std (08/25/15)
Kernel: Linux 3.10.87 #7895 Tue Aug 25 03:26:48 CEST 2015 mips
Status: OK
Reset: YES
Errors: Reset pin doesn't work. Settings requires a reset during first flash to take changes.
Was working fine with r27716. Flashed with r27745 and the flash procedure finished after just 20 seconds. After reboot, GUI said I was still on r27716, the WLAN lights aren't working correctly, and the reset button doesn't work.
Flashed with r27716 and cleared settings, but reset still doesn't work and WLAN lights still wrong. Everything else seems to work OK.
Is this ever going to be fixed? Is there any flashing procedures that work aside from webflash? tftp upgrade also bricks router so....
Not even worth trying to update via web interface if you don't see any specific entries on the changelog. Just use tftp until it gets fixed. _________________ [ATHEROS] ------------> Buffalo WZR-HP-G300NH [A0 D0] --> DD-WRT v3.0-r36645 std (08/19/18) - (AP)
[ATHEROS] ------------> Buffalo WZR-HP-G300NH [A0 D0] --> DD-WRT v3.0-r36645 std (08/19/18) - (AP)
[QUALCOMM ATHEROS] -> TP-Link TL-WR841ND v9 --------> DD-WRT v3.0-r36645 std (08/19/18) - (AP)
Status: bricked
Reset: yes (before and after flash)
after setting up https and wifi router goes down and does not respond, reset button also not work at all. I tried 30 and 30/30/30 reset. and unidentified network for any lan port so no tftp trick for me.
Any chance to unbrick my device?
Router:Buffalo WZR-HP-AG300H
Firmware:DD-WRT v3.0-r27745 std (08/25/15)
Kernel:Linux 3.10.87 #7817 Tue Aug 25 01:48:19 CEST 2015 mips
Status:So far so good I will report back in a couple days
Reset:no
Errors:none I see yet
Other note: I was able to webflash this without issues.
Status: bricked
Reset: yes (before and after flash)
after setting up https and wifi router goes down and does not respond, reset button also not work at all. I tried 30 and 30/30/30 reset. and unidentified network for any lan port so no tftp trick for me.
Any chance to unbrick my device?
Reset button is broken since 27700, folks shouldn't use any 27700 build and after, until this is not fixed http://svn.dd-wrt.com/ticket/4800
You will need Telnet or Serial to fix it. Search the DD-WRT Wiki on how to do that. _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX