New build: DD-WRT v3.0 --- 27745 --- 2015/08/25

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3, 4  Next
Author Message
bdg2
DD-WRT User


Joined: 18 Apr 2013
Posts: 319

PostPosted: Sat Aug 29, 2015 16:17    Post subject: Reply with quote
mrjcd wrote:
WNDR3700 V4
DD-WRT v3.0-r27745 std (08/25/15)
Linux 3.10.87 #7901 Tue Aug 25 03:49:01 CEST 2015 mips
Update live from previous
DD-WRT v3.0-r27734 std (08/24/15)
Linux 3.10.87 #7775 Mon Aug 24 03:31:09 CEST 2015 mips

Still has little bug same as previous builds --- Local DNS (assigned static leases access by name) not working until you 'Apply Settings'
The unbound.conf is not loading all 'local-data' at startup. Tried a few things thinking dnsmasqDNS was conflicting but does no good to
turn that off or turning off local DNS.
So I'm still using -
DNSMasq for DHCP
DNSMasq for DNS
DHCP-Authoritative
Recursive DNS Resolving
Forced DNS Redirection
Used Domain LAN & WLAN
Local DNS
No DNS Rebind
Query DNS in Strict Order
and hit 'Apply Settings' after reboot and it's working like a champ Smile


I'm assuming you're filling in the assignments you want to make under Services / Services / Static Leases.
If that's right try diabling "Local DNS", which I think only refers to providing your own hosts file.
Sponsor
loboozer
DD-WRT Novice


Joined: 01 Apr 2015
Posts: 6

PostPosted: Sat Aug 29, 2015 22:10    Post subject: Reply with quote
h8red wrote:
loboozer wrote:

I've only been using it for 30 minutes, but... All devices on my network seem to connect and talk to each other just fine.(a lot of devices)I'll let ya know of any issues. I've been trying all of these "beta" updates for a while now. I think it's safe to say that you've got my router figured out. Razz

Try to reset with a button Smile
http://svn.dd-wrt.com/ticket/4800#comment:19


Ah, thank you. Reset button seems to be disabled. Time zone seems to be working correctly though. Everything else ok so far.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5386
Location: Texas

PostPosted: Sun Aug 30, 2015 1:22    Post subject: Reply with quote
bdg2 wrote:
mrjcd wrote:
WNDR3700 V4
DD-WRT v3.0-r27745 std (08/25/15)
Linux 3.10.87 #7901 Tue Aug 25 03:49:01 CEST 2015 mips
Update live from previous
DD-WRT v3.0-r27734 std (08/24/15)
Linux 3.10.87 #7775 Mon Aug 24 03:31:09 CEST 2015 mips

Still has little bug same as previous builds --- Local DNS (assigned static leases access by name) not working until you 'Apply Settings'
The unbound.conf is not loading all 'local-data' at startup. Tried a few things thinking dnsmasqDNS was conflicting but does no good to
turn that off or turning off local DNS.
So I'm still using -
DNSMasq for DHCP
DNSMasq for DNS
DHCP-Authoritative
Recursive DNS Resolving
Forced DNS Redirection
Used Domain LAN & WLAN
Local DNS
No DNS Rebind
Query DNS in Strict Order
and hit 'Apply Settings' after reboot and it's working like a champ Smile


I'm assuming you're filling in the assignments you want to make under Services / Services / Static Leases.
If that's right try diabling "Local DNS", which I think only refers to providing your own hosts file.

Yes and tried that. Also tried disabling No DNS Rebind... and many other things.
All works perfect after a reboot if disable 'Recursive DNS Resolving'
... but I'm stubborn and I want to use it.
So it all works perfect after a reboot then an 'Apply Settings' Wink

http://www.dd-wrt.com/phpBB2/viewtopic.php?p=980113#980113

First noticed it here ¬
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=974240#974240
I think that build was when the feature was was implemented ¿¿??
bdg2
DD-WRT User


Joined: 18 Apr 2013
Posts: 319

PostPosted: Sun Aug 30, 2015 1:51    Post subject: Reply with quote
mrjcd wrote:
Yes and tried that. Also tried disabling No DNS Rebind... and many other things.
All works perfect after a reboot if disable 'Recursive DNS Resolving'
... but I'm stubborn and I want to use it.
So it all works perfect after a reboot then an 'Apply Settings' Wink

http://www.dd-wrt.com/phpBB2/viewtopic.php?p=980113#980113

First noticed it here ¬
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=974240#974240
I think that build was when the feature was was implemented ¿¿??


Why do you want to use Recursive DNS Resolving?
I understand that it's not generally recommended.
Where are you enabling it? I can even find it in the dd-wrt on my WNDR3700v2.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5386
Location: Texas

PostPosted: Sun Aug 30, 2015 2:25    Post subject: Reply with quote
bdg2 wrote:
Why do you want to use Recursive DNS Resolving?

Something to play with. Actually everything I do works just fine with or without it Cool

bdg2 wrote:
I understand that it's not generally recommended.

hummm oh well --

bdg2 wrote:
Where are you enabling it?


Doing some other things with this box right now is why nothing is checked at the moment -

bdg2 wrote:
I can even find it in the dd-wrt on my WNDR3700v2.

WNDR3700v2 - 16 MB flash
27745 wndr3700v2-webflash.bin is 8,417,308 bytes

WNDR3700v4 - 128 MB flash
27745 wndr3700v4-webflash.bin is 24,633,372 bytes

Probably why you don't see it on your box -
loboozer
DD-WRT Novice


Joined: 01 Apr 2015
Posts: 6

PostPosted: Sun Aug 30, 2015 3:18    Post subject: Reply with quote
Router: TPLink WR842ND v2.X
Firmware: DD-WRT v3.0-r27745 std (08/25/15)
Kernel: Linux 3.10.87 #7895 Tue Aug 25 03:26:48 CEST 2015 mips
Status: OK
Reset: NO
Errors: none

At first, no problems. But, reset button wouldn't work. Eventually, I lost connection to internet. Reset modem, reset router through web GUI, tried mac clone. Local Network fine, but still no internet. I wish I could give more info, I didn't have time to collect more data. My family went nuts without internet. I had to do something.

Thankfully I was able to revert to stock firmware with the file provided here. Everything's working now. But the stock firmware is garbage compared to dd-wrt. I'll wait for the next beta. Don't be discouraged, keep it up. You are doing great work.
nickj
DD-WRT Novice


Joined: 06 May 2015
Posts: 13

PostPosted: Sun Aug 30, 2015 5:10    Post subject: Reply with quote
Router: Dlink DIR632
Firmware: DD-WRT 20150825 r27745 beta
Old firmware: DD-WRT 20150506 r26839 beta
Kernel: Linux DD-WRT 3.10.87 #7867 Tue Aug 25 02:59:32 CEST 2015 mips GNU/Linux
Reset: No.
Errors: After firmware upgrade, could not access Web interface, and could not connect with SSH, yet it was working for LAN + Wifi internet access. Turning it off and on again made both the web interface and SSH start working again.
Fixes: A macbook was having trouble connecting to Wifi with the previous firmware (r26839) - that seems to be working again after the upgrade.
Unknown whether it should work as not: Using this unit as an access point & switch, but NOT the gateway, and would like to be able to block access to specific IP addresses for traffic passing through. Cannot seem to do this with either iptables or ebtables - iptables never worked, but ebtables used to (e.g. "ebtables -I FORWARD -p IPv4 --ip-destination 8.8.8.8/32 -j DROP "), but that's has not worked for a few months at least, including in this firmware version.
brycemg6
DD-WRT Novice


Joined: 24 May 2014
Posts: 6

PostPosted: Sun Aug 30, 2015 22:20    Post subject: Reply with quote
Router: WNDR4300v1
Firmware: DD-WRT v3.0-r27745 std (08/25/15)
Kernel: Linux 3.10.87 #7895 Tue Aug 25 03:26:48 CEST 2015 mips
Status: OK
Reset: YES
Errors: Reset pin doesn't work. Settings requires a reset during first flash to take changes.
JohnnyG
DD-WRT Novice


Joined: 30 Aug 2015
Posts: 2

PostPosted: Sun Aug 30, 2015 22:22    Post subject: Reply with quote
Router: Buffalo WZR-600DHP
Firmware: v3.0-r27745
Kernel: 3.10
Status: Confused
Reset: Nope
Errors:

Was working fine with r27716. Flashed with r27745 and the flash procedure finished after just 20 seconds. After reboot, GUI said I was still on r27716, the WLAN lights aren't working correctly, and the reset button doesn't work.

Flashed with r27716 and cleared settings, but reset still doesn't work and WLAN lights still wrong. Everything else seems to work OK.
un1versal
DD-WRT User


Joined: 12 Jul 2015
Posts: 80

PostPosted: Mon Aug 31, 2015 10:21    Post subject: WZR-HP-G300NH Reply with quote
And still broken....

WZR-HP-G300NH

http://svn.dd-wrt.com/ticket/4742

Is this ever going to be fixed? Is there any flashing procedures that work aside from webflash? tftp upgrade also bricks router so....
oraculo666
DD-WRT Novice


Joined: 13 Sep 2010
Posts: 37
Location: Belo Horizonte, Brazil

PostPosted: Mon Aug 31, 2015 15:49    Post subject: Re: WZR-HP-G300NH Reply with quote
un1versal wrote:
And still broken....

WZR-HP-G300NH

http://svn.dd-wrt.com/ticket/4742

Is this ever going to be fixed? Is there any flashing procedures that work aside from webflash? tftp upgrade also bricks router so....

Not even worth trying to update via web interface if you don't see any specific entries on the changelog. Just use tftp until it gets fixed.

_________________
[ATHEROS] ------------> Buffalo WZR-HP-G300NH [A0 D0] --> DD-WRT v3.0-r36645 std (08/19/18) - (AP)
[ATHEROS] ------------> Buffalo WZR-HP-G300NH [A0 D0] --> DD-WRT v3.0-r36645 std (08/19/18) - (AP)
[QUALCOMM ATHEROS] -> TP-Link TL-WR841ND v9 --------> DD-WRT v3.0-r36645 std (08/19/18) - (AP)
alesh
DD-WRT Novice


Joined: 01 Sep 2015
Posts: 1

PostPosted: Tue Sep 01, 2015 20:18    Post subject: Reply with quote
Router Model: WR841N v8.1

Status: bricked
Reset: yes (before and after flash)

after setting up https and wifi router goes down and does not respond, reset button also not work at all. I tried 30 and 30/30/30 reset. and unidentified network for any lan port so no tftp trick for me.
Any chance to unbrick my device?
EvlGns
DD-WRT Novice


Joined: 13 Feb 2015
Posts: 1

PostPosted: Wed Sep 02, 2015 0:13    Post subject: Reply with quote
Router:Buffalo WZR-HP-AG300H
Firmware:DD-WRT v3.0-r27745 std (08/25/15)
Kernel:Linux 3.10.87 #7817 Tue Aug 25 01:48:19 CEST 2015 mips
Status:So far so good I will report back in a couple days
Reset:no
Errors:none I see yet

Other note: I was able to webflash this without issues.
KrypteX
DD-WRT Guru


Joined: 18 Jan 2014
Posts: 2411

PostPosted: Wed Sep 02, 2015 6:47    Post subject: Reply with quote
alesh wrote:
Router Model: WR841N v8.1

Status: bricked
Reset: yes (before and after flash)

after setting up https and wifi router goes down and does not respond, reset button also not work at all. I tried 30 and 30/30/30 reset. and unidentified network for any lan port so no tftp trick for me.
Any chance to unbrick my device?

Reset button is broken since 27700, folks shouldn't use any 27700 build and after, until this is not fixed http://svn.dd-wrt.com/ticket/4800
You will need Telnet or Serial to fix it. Search the DD-WRT Wiki on how to do that.

_________________
THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX

Testing BrainSlayer's DD-WRT build 31924 on various units:
NETGEAR : WNDR3800 WNDR3800CH WNDRMACv2 WNDRMACv1 WNR2200 WNR2000v3
TP-LINK : ArcherC7v3 WR1043NDv3 WR740Nv4 WR740Nv6 WR710Nv1 WR810Nv1 WA850REv1 WA901NDv3 WA901NDv4
D-LINK : DIR-862L DIR-615D2
ASUS : RT-N10 C1
VirtualBox : x86_64
wenzhuo
DD-WRT User


Joined: 22 Apr 2011
Posts: 168

PostPosted: Wed Sep 02, 2015 10:12    Post subject: Reply with quote
KrypteX wrote:

Reset button is broken since 27700, folks shouldn't use any 27700 build and after, until this is not fixed http://svn.dd-wrt.com/ticket/4800

Alternatively, you can start resetbutton manually, or through rc_startup.
Goto page Previous  1, 2, 3, 4  Next Display posts from previous:    Page 2 of 4
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum