New build is out 27716 (BS) V3.0

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Fri Aug 21, 2015 12:39    Post subject: New build is out 27716 (BS) V3.0 Reply with quote
ftp://ftp.dd-wrt.com/betas/2015/08-21-2015-r27716/

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 27716_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless.
If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
[I prefer answere in whole sentence]
Sponsor
KrypteX
DD-WRT Guru


Joined: 18 Jan 2014
Posts: 2411

PostPosted: Fri Aug 21, 2015 13:05    Post subject: Reply with quote
DD-WRT build 27716 - 2015/08/21 has been released: ftp://ftp.dd-wrt.com/betas/2015/08-21-2015-r27716/

CHANGELOG since 27700:
    [703-704,711] Upd: OLSRd 0.9.0.2
    [701-702,705] Fix: [K3.18] FIB backport
    [707-716] Fix: Marvell support
    [706] Fix: WiFi 5GHz defaults

Your reports for Broadcom units are highly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors:

_________________
THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
e3000usr
DD-WRT User


Joined: 09 Jul 2014
Posts: 183

PostPosted: Fri Aug 21, 2015 13:39    Post subject: Reply with quote
upgraded from 27700

Router: E3200
Firmware: K3 Mega E3200
Status: Working
Reset: None
Errors: None (Do not use wireless)
Bernadoe
DD-WRT User


Joined: 03 Dec 2014
Posts: 217

PostPosted: Fri Aug 21, 2015 14:47    Post subject: Reply with quote
Router: Netgear R7000
Firmware: DD-WRT v3.0-r27716 std (08/21/15)
Kernel: 3.10.87 #4514 SMP Thu Aug 20 08:09:35 CEST 2015 armv7l
Status: Working
Reset: None
Errors: Reset Button NOT Working


Last edited by Bernadoe on Sun Aug 23, 2015 15:31; edited 7 times in total
AreA
DD-WRT User


Joined: 20 Aug 2009
Posts: 163

PostPosted: Fri Aug 21, 2015 15:28    Post subject: Reply with quote
Router: Linksys E2500
Firmware: DD-WRT v3.0-r27716 std (08/21/15)K3.X
Status: Working
Reset: Yes

Errors: (always the same mistakes for quite some time. Is it serves some of the mistakes refer here?)

1/Restricting access does not work (no filter functions)

2/Bug in the French version: "Sans fil activ&#233 ;" instead of "Sans fil activé"
KrypteX
DD-WRT Guru


Joined: 18 Jan 2014
Posts: 2411

PostPosted: Fri Aug 21, 2015 17:32    Post subject: Reply with quote
Anyone with broken reset button in r27700 or r27716 ?
There are 2 reports of non-functional reset button with r27700 in the Atheros section:
http://www.dd-wrt.com/phpBB2/viewtopic.php?p=980004#980004

_________________
THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
daxy
DD-WRT Novice


Joined: 14 Apr 2014
Posts: 10

PostPosted: Fri Aug 21, 2015 18:49    Post subject: Reply with quote
Router: Netgear R6300v1
Firmware: dd-wrt.v24-27716_NEWD-2_K3.x_mega-R6300
Kernel: 3.10.87 #9319 Fri Aug 21 09:41:09 CEST 2015 mips
Status: Working
Reset: None
Errors: None

Notes:
SSH works again, using in Client Bridge mode connecting to AC-RT86U (Merlin) on AC perfectly.
pokazene_maslo
DD-WRT User


Joined: 29 Dec 2009
Posts: 84
Location: Slovakia

PostPosted: Fri Aug 21, 2015 19:44    Post subject: Reply with quote
Router: Buffalo WZR-1750DHP
Firmware: buffalo-wzr-1750dhp r27716
Kernel: 3.10.87 armv7l
Status: Working
Reset: yes
Errors: transmission daemon can't start
2chp
DD-WRT Novice


Joined: 10 Jun 2015
Posts: 25

PostPosted: Fri Aug 21, 2015 20:23    Post subject: Reply with quote
Router: Netgear WNDR4500 V1
Firmware: DD-WRT v3.0-r27716 giga (08/21/15)
Kernel: 3.10.87 #9319 Fri Aug 21 09:41:09 CEST 2015 mips
Status: A OK
Reset: 30/30/30 Before & After
Errors: None

EDIT: Lost WiFi after 9 hrs. of uptime. Only LAN works, reboot solves the issue.


Last edited by 2chp on Sat Aug 22, 2015 2:55; edited 1 time in total
emwgee
DD-WRT Novice


Joined: 19 Dec 2013
Posts: 28

PostPosted: Fri Aug 21, 2015 20:24    Post subject: Reply with quote
Router: Linksys E4200v1
Firmware: DD-WRT v3.0-r27716 std (08/21/15)K3.X
Status: Working
Reset: No

Up 2 hours, so far very stable, good speed.

Time access restriction works except for
guest network on VAP. Is this a bug, any workarounds?
Drek
DD-WRT User


Joined: 28 Sep 2008
Posts: 218

PostPosted: Fri Aug 21, 2015 20:26    Post subject: Reply with quote
Router: ASUS RT-AC68U
Firmware: r27716
Kernel: 3.0
Status: working but can't log in
Reset: 30/30/30
Errors: Set the default password now I can't log in. A hard reset did not reset the password. The reset button does not appear to be working properly.

More information. I can't log into the gui with my password, but I was able to log into telnet. I'm going to try to revert the firmware to a working version that way.

_________________
Netgear XR500
Rogers Ignite Cable
150mbps down/15mbps up
newnews
DD-WRT User


Joined: 14 Feb 2010
Posts: 86

PostPosted: Fri Aug 21, 2015 21:29    Post subject: Reply with quote
Marvell support means DD-WRT is supporting routers using marvell chips e.g. cisco EA3500 now?
KrypteX
DD-WRT Guru


Joined: 18 Jan 2014
Posts: 2411

PostPosted: Fri Aug 21, 2015 21:37    Post subject: Reply with quote
newnews wrote:
Marvell support means DD-WRT is supporting routers using marvell chips e.g. cisco EA3500 now?

Check the changelog in my signature and you'll see that Build 27700 brought support for Marvell-based routers Linksys WRT1900AC & WRT1200AC.

Build 27716 brings fixes to the Marvell implementation - that's why I named it "Fix".

_________________
THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
KrypteX
DD-WRT Guru


Joined: 18 Jan 2014
Posts: 2411

PostPosted: Sat Aug 22, 2015 6:55    Post subject: Reply with quote
Drek wrote:
Router: ASUS RT-AC68U
Firmware: r27716
Kernel: 3.0
Status: working but can't log in
Reset: 30/30/30
Errors: Set the default password now I can't log in. A hard reset did not reset the password. The reset button does not appear to be working properly.

More information. I can't log into the gui with my password, but I was able to log into telnet. I'm going to try to revert the firmware to a working version that way.

Can you check reverting to 27600 and see if the reset button still works (this with 27600 on the router) ?
I have confirmation that 27700 and 27716 have broken reset button: http://svn.dd-wrt.com/ticket/4800 , but I'm not sure about 27600. I'd like to track down the commit that broke it.

_________________
THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
KrypteX
DD-WRT Guru


Joined: 18 Jan 2014
Posts: 2411

PostPosted: Sat Aug 22, 2015 6:58    Post subject: Reply with quote
2chp wrote:
Router: Netgear WNDR4500 V1
Firmware: DD-WRT v3.0-r27716 giga (08/21/15)

Reset: 30/30/30 Before & After

How did you manage to do a 30/30/30 reset (especially "after"), if the reset button is broken in 27700 & 27716 ? See this ticket http://svn.dd-wrt.com/ticket/4800
Please give us more details. What was the previous build version ? Did the 30/30/30 reset the webgui password ?

_________________
THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum