EA6300v1 is hardware identical to EA6400 and Brainslayer has added it for dd-wrt support.
EA6350 is so different in nvram function and storage that it can only be supported if a router is donated to Brainslayer.
Edit 20151112:
EA6350 is the successor of EA6200 and EA6300 (first version without version number, FCC ID Q87-EA6300) which has been discontinued.
EA6350 hardware is 100% compatible with them. _________________ Kernel panic: Aiee, killing interrupt handler!
Last edited by LOM on Thu Nov 12, 2015 15:23; edited 2 times in total
Posted: Mon Aug 17, 2015 13:45 Post subject: Config filesbackup
Hi Brainslayer.
Would it be possible that you backup the pstcfg and sysconfig files from that ea6400 and post them here?
They should be on /dev/mtdblock6, wich mounts to "/var/config", or "/tmp/var/config" when running the original firmware.
Dont remember on the top of my head wich path it was
Anyway, I am trying to rebuild that pstcfg file so people can go back to stock firmware if needed.
But it seems to have a format that differs from typical config files/nvram variables as I always get
something like "invalid entry in file..." when i create it, and then the router deletes it on boot
Changeset [27638] by BrainSlayer (ea6400)
Changeset [27637] by BrainSlayer (ea6400)
Changeset [27636] by brainslayer (ea6400)
Changeset [27635] by BrainSlayer (ea6400)
Changeset [27634] by BrainSlayer (ea6400)
Changeset [27633] by BrainSlayer (ea6400)
Changeset [27632] by BrainSlayer (ea6400)
Changeset [27631] by BrainSlayer (ea6400)
and
Changeset [27640] by brainslayer (ea6300v1)
Changeset [27639] by brainslayer (ea6300v1)
I think it's just a matter of time when a new beta arrives with support for ea6300v1 and ea6400 integrated.
I have read your posts in this thread and you are annoyingly pushy for being someone not on the donation list. _________________ Kernel panic: Aiee, killing interrupt handler!
Posted: Wed Aug 19, 2015 21:18 Post subject: Re: EA63000
CobraSpaz wrote:
I apologize for my rude first reply.
Accepted
6300V1 - not a question , otherwise i would post , elsewhere .
Anyway - 38 months , yes it shows it is an outstanding device, and the lesson is not too hard, i managed to use ddwrt on 6300v1 in one day, and only the stohastic fairness queue is the only feature wont work and i would use if it would.
I completely can not understand why , it modifies the protocol stack so no ASIC utilisation DMA pool modifying or anything could cause a restart...... it should be a pure software related thing.
Even overclocking works well, i recommend everyone 1ghz , a little bit warmer but ok. And dont forget to use powersupply of at least 1.5A if you do not have a bundled one,that comes with the router to be stable
The newly supported models are: EA6300v1 and EA6400v1, both have FCC ID: Q87-EA6400
Both of them are still WIP (Work in Progress) on the Supported Devices list:
http://www.dd-wrt.com/wiki/index.php/Supported_Devices
Also see the DD-WRT changelog in my signature.
The regular EA6300 (no version) is not yet supported by DD-WRT. _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX