TP-Link Archer C9 Brick Fix (Revert To Stock Possibly)

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4, 5 ... 20, 21, 22  Next
Author Message
Heinzek
DD-WRT User


Joined: 07 Apr 2013
Posts: 59
Location: Poland

PostPosted: Thu Jul 23, 2015 9:48    Post subject: Reply with quote
Login in to DD-WRT config page.
Go to Services - Secure Shell - SSHd - Enable

On Windows install WinSCP - https://winscp.net/eng/download.php

Connect to 192.168.1.1 using SCP protocol.
Open Terminal ( CTRL + T) and Enter command:
cat /dev/mtd1 > /tmp/mtd1.bin
and click Execute. Wait 30 sec and click close.
On right windows go to /tmp/ folder and copy mtd1.bin to your computer.
Sponsor
kuennek
DD-WRT Novice


Joined: 09 May 2015
Posts: 35

PostPosted: Thu Jul 23, 2015 10:12    Post subject: Reply with quote
@Heinzek

SSH TCP enable too?
Heinzek
DD-WRT User


Joined: 07 Apr 2013
Posts: 59
Location: Poland

PostPosted: Thu Jul 23, 2015 10:14    Post subject: Reply with quote
No. Enable only SSHd and Password login
kuennek
DD-WRT Novice


Joined: 09 May 2015
Posts: 35

PostPosted: Thu Jul 23, 2015 10:30    Post subject: Reply with quote
ok,but i cant Login

if i start WinSCP on Name i write 192.168.1.1
i use Protokoll SCP.Then i must writ admin and then the Password.But every time i write my Passwort the Access denied.But ist the right password
Heinzek
DD-WRT User


Joined: 07 Apr 2013
Posts: 59
Location: Poland

PostPosted: Thu Jul 23, 2015 10:31    Post subject: Reply with quote
As login use root
kuennek
DD-WRT Novice


Joined: 09 May 2015
Posts: 35

PostPosted: Thu Jul 23, 2015 10:44    Post subject: Reply with quote
@heinzek

Passwort root not work.Acces Denied

http://img5.fotos-hochladen.net/uploads/taix4u1jpq2v.jpg
Heinzek
DD-WRT User


Joined: 07 Apr 2013
Posts: 59
Location: Poland

PostPosted: Thu Jul 23, 2015 10:47    Post subject: Reply with quote
Benutzername - root
Kennwort - same as webinterface
kuennek
DD-WRT Novice


Joined: 09 May 2015
Posts: 35

PostPosted: Thu Jul 23, 2015 11:06    Post subject: Archer Reply with quote
Thx Heinzek

here the file:

http://ul.to/wx5bk4ht

and let me pls know whats up now
Heinzek
DD-WRT User


Joined: 07 Apr 2013
Posts: 59
Location: Poland

PostPosted: Thu Jul 23, 2015 12:55    Post subject: Reply with quote
All config data in your router is broken. Can you give me
Your router MAC and PIN from router label?
kuennek
DD-WRT Novice


Joined: 09 May 2015
Posts: 35

PostPosted: Thu Jul 23, 2015 13:32    Post subject: Reply with quote
Hey sure,

MAC: 14CC200CB156
WLAN/Pin:50727322


thx
Heinzek
DD-WRT User


Joined: 07 Apr 2013
Posts: 59
Location: Poland

PostPosted: Thu Jul 23, 2015 13:56    Post subject: Reply with quote
Back to stock from DD-WRT - FullRevert
1. Login in to DD-WRT config page.
2. Go to Services - Secure Shell - SSHd > Enable
3. On Windows install WinSCP - https://winscp.net/eng/download.php
4. Connect to 192.168.1.1 using SCP protocol. Login root, password is the same for webinterface.
5. Download and extract archive: https://mega.nz/#!gRJQAZZC!MfnW31l-qP2Qkpy1wOrfiSi6R4Vasa9UDUiZ2rrOAmg
6. Copy file radio.bin and firmware.bin to /tmp/ directory on router.
7. Open Terminal ( CTRL + T) and Enter command: mtd write /tmp/radio.bin nvram_cfe
8. Click Execute and wait 3 sec and click close.
9. enter command: mtd -r write /tmp/firmware.bin linux
10. wait 80 sec. Dont worry about popup.

Router automaticly reboot and run with factory firmware.

Router MAC: 14 CC 20 D1 DC AA
WPA key/WPS pin: 79342513

Good Luck!!
Changing MAC and PIN its to hard for me.
kuennek
DD-WRT Novice


Joined: 09 May 2015
Posts: 35

PostPosted: Thu Jul 23, 2015 14:45    Post subject: Reply with quote
@Heinzek

6. Copy file radio.bin and firmware.bin to /tmp/ directory on router.

Is that the place where i send you the file?
kuennek
DD-WRT Novice


Joined: 09 May 2015
Posts: 35

PostPosted: Thu Jul 23, 2015 15:09    Post subject: revert Reply with quote
here

http://www.directupload.net/file/d/4057/k3vtwarb_jpg.htm

right?

I have Copy this 2 Files to it and now my i have no Connect to WIN SCP and all Light of my router are Blinking and gou out then Blinking then go Out every Time.And now?Maybe restart the Router?
Heinzek
DD-WRT User


Joined: 07 Apr 2013
Posts: 59
Location: Poland

PostPosted: Thu Jul 23, 2015 17:26    Post subject: Reply with quote
@kuenn
ekhere

http://www.directupload.net/file/d/4057/k3vtwarb_jpg.htm

right?

Yes.

I have Copy this 2 Files to it and now my i have no Connect to WIN SCP
Use all 10 steps?
kuennek
DD-WRT Novice


Joined: 09 May 2015
Posts: 35

PostPosted: Thu Jul 23, 2015 17:43    Post subject: Reply with quote
Yes,
i have copy this Files.Directly i had no Internet Connection and the Router Led all Blinking Blue for 5 Seconds and then go out an then turn on for 5 Seconds.if i make step 6(Copy the 2 Files the WINSCP say no Connected.And now i cant connect to router with 192.168.1.1
Goto page Previous  1, 2, 3, 4, 5 ... 20, 21, 22  Next Display posts from previous:    Page 4 of 22
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum