Joined: 21 Jul 2006 Posts: 1898 Location: Fortaleza Ce Brazil
Posted: Wed Jul 15, 2015 23:39 Post subject: New Kong build 7-16-15 #27525
Ops , Kong build for my R7000 was release .. lets start to test
MOD EDIT: It is a bit late for this as this thread is a bit of a mess, but it is getting worse so...
This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build (e.g. 27525_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. Please also do not respond to such questions. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ DDwrt ...it rocks ....
1 R7800 54420 AP Wireguard webserver JFFS SAMBA FTP usb HD Mesh
1 R7800 54420 Cli Mesh
1 WZR1750 54389 AP Webserver Samba Wireguard
1 TP link Archer C7v5 54420 Cli Mesh
1 DD x86_64 48296 Gateway Samba Ftp Webserver
Last edited by stalonge on Wed Jul 15, 2015 23:54; edited 2 times in total
would this (http://www.desipro.de/ddwrt/K3-AC-Arm/dd-wrt.v24-K3_AC_ARM_STD.bin) be suitable for any ARM-based routers? I have the DLink 868L which uses Broadcom 4708.
If you already have dd-wrt on it it will work. I just don't have an initial build for this model, I only provide initial builds if I was able to test such an initial build once to verify, that the build command for the image is correct.
The build works for all 4708/4709 models with dual radio and broadcom wireless chips.
It does not work on models that come with quantenna radio or triple radio e.g. 87U (Quantenna) R8000 (Triple Radio) ...
If I find the time I can write down the current list of supported models.
mrjayviper wrote:
would this (http://www.desipro.de/ddwrt/K3-AC-Arm/dd-wrt.v24-K3_AC_ARM_STD.bin) be suitable for any ARM-based routers? I have the DLink 868L which uses Broadcom 4708.
Thank you
_________________ Router currently owned:
Netgear R7800 - Router
Netgear R7000 - AP mode
If you already have dd-wrt on it it will work. I just don't have an initial build for this model, I only provide initial builds if I was able to test such an initial build once to verify, that the build command for the image is correct.
The build works for all 4708/4709 models with dual radio and broadcom wireless chips.
It does not work on models that come with quantenna radio or triple radio e.g. 87U (Quantenna) R8000 (Triple Radio) ...
If I find the time I can write down the current list of supported models.
See my previous post.
Voli wrote:
Would this work on an Asus RT-AC87?
_________________ Router currently owned:
Netgear R7800 - Router
Netgear R7000 - AP mode
New build up and running on R6300V2. Used ddup. So far no complaints.
Thanks, Kong! _________________ R6300v2 Kong 27560M
R6250 BS 27506 (backup router)
WNDR4500v1 Stock Netgear
WNDR4500v3 Stock Netgear
2xE3000 TomatoRAF v1.28.9014 v1.3d
2x3500L TomatoRAFv1.28.9013 V1.2e
GL-CONNECT INET v1 Gargoyle 1.7.1 (openwrt)
Up going on 7 hrs on main and AP R7000, no problems. _________________ Segment 1 XR700 10Gb LAN, 1Gb WAN ISP BS
Wired AP 1 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 2 Unifi Wifi 6 LR US 1Gb LAN
Wired AP 3 Unifi Wifi 6 LR US 1Gb LAN
Syslog Services Asustor 7110T NAS 10GB
NetGear XS716T 10GB Switch
download1.dd-wrt.com/dd-wrtv2/downloads/betas/ (Brain Slayer)
YAMon https://usage-monitoring.com/index.php
would this (http://www.desipro.de/ddwrt/K3-AC-Arm/dd-wrt.v24-K3_AC_ARM_STD.bin) be suitable for any ARM-based routers? I have the DLink 868L which uses Broadcom 4708.
Thank you
If you already have dd-wrt on it it will work. I just don't have an initial build for this model, I only provide initial builds if I was able to test such an initial build once to verify, that the build command for the image is correct.
The build works for all 4708/4709 models with dual radio and broadcom wireless chips.
It does not work on models that come with quantenna radio or triple radio e.g. 87U (Quantenna) R8000 (Triple Radio) ...
If I find the time I can write down the current list of supported models.
Joined: 21 Jul 2006 Posts: 1898 Location: Fortaleza Ce Brazil
Posted: Thu Jul 16, 2015 11:11 Post subject:
After 13 hours
R7000 #1
PPPoe OK
SQUID rules OK
HDD ntfs 5 TB OK
Samba & FTP OK
Webserver OK
DDDns OK
Port Forward OK
WIFI 2.4 & 5 OK
DNLAserver 1Tb OK
Webgui OK
Access Restric OK
MAC address SAME LAN & WIFI ??????????
R7000 #2
PPPoe OK
HDD ext4 2 TB OK
Samba & FTP OK
DDDns OK
Port Forward OK
WIFI 2.4 & 5 OK
Webgui OK
DMZ OK
MAC address LAN & WIFI OK ( Diferent )
@ Kong
Is it a issue if shows same mac address ? .. Why just in one R7000 ? Maybe need a complete factory defaults , isnt it ?
i dont reset none ..
Great JOb Devs
Thank you
_________________ DDwrt ...it rocks ....
1 R7800 54420 AP Wireguard webserver JFFS SAMBA FTP usb HD Mesh
1 R7800 54420 Cli Mesh
1 WZR1750 54389 AP Webserver Samba Wireguard
1 TP link Archer C7v5 54420 Cli Mesh
1 DD x86_64 48296 Gateway Samba Ftp Webserver