Your reports for Atheros units are highly appreciated !
Router:
Firmware:
Kernel:
Status:
Reset:
Errors: _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
Last edited by KrypteX on Thu Jul 09, 2015 15:42; edited 4 times in total
on tl-wdr4900 v1 i have to apply wireless settings to reinit wifi after a reboot, for client mode interface to work or it sticks on channel unknown with no connection _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
WNDR3700 V4
DD-WRT v3.0-r27506 (07/09/15) std
Linux 3.10.83 #5722 Thu Jul 9 02:57:57 CEST 2015 mips
No reset from -
DD-WRT v3.0-r27490 (07/06/15) std
Linux 3.10.83 #5480 Mon Jul 6 03:33:11 CEST 2015 mips
Using as main router
All working well ...
Same as previous two builds --- DNS issues until you 'Apply Settings'
'bout best I can figure it has to do with how the processes load -- what order¿¿¿???
Disabling 'Forced DNS Redirection' and reboot lets me get to some devices w/static
leases using local DNS but not all. 'Apply Settings' and it all works fine --- then again
might be time to clean out the cobwebs and reconfigure
Last edited by mrjcd on Thu Jul 09, 2015 17:40; edited 1 time in total
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Thu Jul 09, 2015 18:54 Post subject:
mrjcd wrote:
WNDR3700 V4
DD-WRT v3.0-r27506 (07/09/15) std
Linux 3.10.83 #5722 Thu Jul 9 02:57:57 CEST 2015 mips
No reset from -
DD-WRT v3.0-r27490 (07/06/15) std
Linux 3.10.83 #5480 Mon Jul 6 03:33:11 CEST 2015 mips
Using as main router
All working well ...
Same as previous two builds --- DNS issues until you 'Apply Settings'
'bout best I can figure it has to do with how the processes load -- what order¿¿¿???
Disabling 'Forced DNS Redirection' and reboot lets me get to some devices w/static
leases using local DNS but not all. 'Apply Settings' and it all works fine --- then again
might be time to clean out the cobwebs and reconfigure
similar to my issue i have the same thing just with the client mode interface coming up instead
Router: Archer C5 V1
Firmware: DD-WRT v3.0-r27506 (07/09/15) std
Kernel: Linux 3.18.17 #3487 Thu Jul 9 02:45:03 CEST 2015 mips
Status: Ok
Reset: No
Errors: No
Bugs: 1. No link lights on front for Pc with 100mb/s ethernet card connections
2. Incorrect information about ath1 rate:
My archer c7 v2 always shows 450 Mb/s on 5ghz even when an AC client is running higher than that with VHT40 as shown in the client list. In other words, its only an aesthetic issue. AC is likely working fine.
EDIT: Scratch that, my AC laptop isn't connecting at over 450 Mb/s so I can't verify that. I know in the past I've connected at 600+ Mb/s and as I recall the archer c7 was still showing 450 Mb/s on the 5ghz radio.
Last edited by devhen on Thu Jul 09, 2015 20:16; edited 1 time in total
My archer c7 v2 always shows 450 Mb/s on 5ghz even when an AC client is running higher than that with VHT40 as shown in the client list. In other words, its only an aesthetic issue. AC is likely working fine.
Did you try setting AC/N-Mixed or AC/N/G-Mixed or AC-Only (I don't know exactly how the AC naming convention is, since I don't have an AC router) instead of Mixed ? _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
