[Siddhant]

I installed a new bootloader in my device UBNT Nano Station 2 but i have a problem with it.I got serial access to the device but the LAN was not going up.

I will tell you what happened.
When i turn on my router,in putty it shows.

MicroRedBoot v1.4, (c) 2009 DD-WRT.COM (Dec 26 2012 REVISION Unversioned directory)
CPU Type: Atheros AR2315/6/7/8
CPU Clock: 184Mhz
Found Flash device SIZE=0x00400000 SECTORSIZE=0x00010000 FLASHBASE=0xBFC00000
Reset Button triggered
Booting Recovery RedBoot
reset button 5 seconds pushed, erasing nvram
(Wating ,wating........... nothing happens)
----------------------------------------------------------
Then i turned off my router and when then i turned on my router by pressing the reset button when the below stuff starts showing.

MicroRedBoot v1.4, (c) 2009 DD-WRT.COM (Dec 26 2012 REVISION Unversioned directory)
CPU Type: Atheros AR2315/6/7/8
CPU Clock: 184Mhz
Found Flash device SIZE=0x00400000 SECTORSIZE=0x00010000 FLASHBASE=0xBFC00000
Reset Button triggered
Booting Recovery RedBoot
loading...

And stops there.Nothing happen after that.
----------------------------------------------------------
And the last method i used that i turn on the router by depressing the reset button.

MicroRedBoot v1.4, (c) 2009 DD-WRT.COM (Dec 26 2012 REVISION Unversioned directory)
CPU Type: Atheros AR2315/6/7/8
CPU Clock: 184Mhz
Found Flash device SIZE=0x00400000 SECTORSIZE=0x00010000 FLASHBASE=0xBFC00000
Found FIS Directory on [0xBFFE0000]
found bootable image: [kernel] at [0xBFC30000] EP [0x80041000]
Booting Linux
loading.................................................Entry point: 0x80198040, address range: 0x80042000-0x80196000

Here it also stops nothing happen then.

So can anyone tell me the correct method to move forward and have my router working.I used this bootloader file

[Siddhant]

So much views but no answer!!!!!!!!!!!!!!!!!!!!

[Sash]

hmmm....have u flashed the correct bootloader for your device (ram, flash, and phy)