Posted: Tue Apr 07, 2015 19:38 Post subject: LED LAN indicators
Hi Everyone, i'm new here!
After bricking my WNR2000 V2 first time round, I have managed to install a mini build (didn't write it down, but it was an Eko from 2010), and then went on to DD-WRT v24-sp2 (03/19/15) mini (SVN revision 26490).
One thing that both builds have is that the LED indicators for LAN are all wrong (as suggested in the Wiki, does anyone have a command/flash that has a fixed version of this?
mikk, if you're afraid of flashing 21061, at the wnr2000 v2 wiki there's a link to an older version, 15XXX check that one...
mine running @ 300Mhz was about 55 degrees C, increasing to 400Mhz the temp raised by 3 degrees...
my router doesn't work that much and i don't have heatsinks so i don't know if i should try to go higher, also it sits in a closet with the covers removed...
Posted: Sat Apr 11, 2015 6:58 Post subject: ftp database?
Thought I would flash 15962, found it at ftp://ftp.dd-wrt.com/betas but still nothing for the wnr 2000 v2, in fact flicking through other builds no v2 ??
Flash the ancient chk that is on the wiki, it's a legacy ftp address maybe that's why you didn't found it.
after the first run on dd-wrt download the generic bin from march 2105 file for broadcom routers.
after dd wrt installed on broadcom devices you just need a generic build.
Joined: 13 Aug 2013 Posts: 3 Location: 192.168.1.1
Posted: Sun Jun 21, 2015 13:29 Post subject:
I successfully flashed build 26947 vpn-small, everything seems to be ok.
Is there any hardware mod for this router ? _________________ Netgear WNR2000 v2
DD-WRT v24-sp2 vpn-small - build 26947