[WVash]

Hello!

http://www.dd-wrt.com/wiki/index.php/Repeater_Bridge
This settings work well, but what can i do if need username/password too for wifi connection?

Here i sett the password, but i dont know where can is sett username :/

[WVash]

So, problem is the next.

For repeate i need make wifi connection with same SSID and same password, but i cant type username.And this mean i cant repeate wifi connection, because if i join to new connection dont have internet connection, only simple local network.


Step 1.
Open the Wireless -> Basic Settings tab

Physical Interface Section
Wireless Mode : Repeater Bridge
Wireless Network Mode : Must Match Primary Router
Wireless Network Name(SSID) : Must Match Primary <<Original wifi SSID, i wanna repeate this Router exactly including exact case- Make sure you spell this correctly
Wireless Channel : Must Match Primary Router (This will disappear once you put it in RB mode, and isn't needed)
Wireless SSID Broadcast : Enable
Network Configuration : Bridged
Save



Step 2.

Virtual Interfaces Section

Add
Wireless Network Name(SSID) : Different from Primary Router <<My fantasy SSID, i wanna joint for this wifi connection
Wireless SSID Broadcast : Enable
AP Isolation : Disable
Network Configuration : Bridged
Save



Open the Wireless -> Wireless Security tab

Physical Interface Section

Security Mode : Must Match Primary Router and DD-wrt only works reliably with WEP or WPA2-AES
WPA Algorithms : Must Match Primary Router
WPA Shared Key : Must Match Primary Router <<Original wifi password
Key Renewal Interval (in seconds) : Leave default

Virtual Interfaces Section (note if you don't see this section your firmware should be atleast v24-sp2)
Security Mode : Must Match Physical Interface
WPA Algorithms : Must Match Physical Interface
WPA Shared Key : Must Match Physical Interface <<Fantasy wifi password
Key Renewal Interval (in seconds) : Leave default
Save

But where can i sett wifi username?
When i connection to my fantasy wifi, dont ask username only password, and this mean connection dont work.

[WVash]

WPA2-AES
I wanna repeate this wifi:
http://www.upc-cablecom.ch/en/about/media-centre/medienmitteilungen/media-detail/?newsid=2014.351_4331_sxv010

http://www.upc-cablecom.ch/en/internet/wi-free/

[WVash]

Thank you!

[Per Yngve Berg]

The Mode is WPA2-Enterprise.

[berndy2001]

Any news on that topic?

Here is a guide for win7: http://www.upc-cablecom.ch/content/dam/www-upc-cablecom-ch/Support/wifi-spots/steps/windows7/Anleitung%20Wi-Free_Windows%207_0814_e.pdf

Is it possible to do this with dd-wrt?

[Kurt T.]

Hello,

I have the same Problem now. I am trying to repeat the UPC Wi-Free network. I am not able to connect my router N66U with it. What are the correct security settings in DDWRT (Phase 2)? Or is it general not possible?

This guide for win7 works on my Computer: http://www.upc-cablecom.ch/content/dam/www-upc-cablecom-ch/Support/wifi-spots/steps/windows7/Anleitung%20Wi-Free_Windows%207_0814_e.pdf

But in DDWRT there isn´t a WPA2-Enterprise option. I think 802.1x is the correct field. But what I have to write into the empty fields? I only have a username and a password.

On my Android Cellphone I filled out the field "Identity" and "password" and it successful connects with UPC Wi-Free.

I am using DD-WRT v24-sp2 (02/04/15) big
(SVN revision 26138M) with my ASUS-N66U router.


Thanks for your help.

[Kurt T.]

I am still trying to connect my router with this UPC Wifree network. Can some guru help me please?

Thanks

[pro-routing]

I'm having the same problem. Did you already find a solution for this?