Tagged vlan 1082 for the Internet.

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
View previous topic :: View next topic  
Author Message
dimon_dl333
DD-WRT Novice


Joined: 05 Dec 2013
Posts: 19
PostPosted: Wed Jan 14, 2015 1:36    Post subject: Tagged vlan 1082 for the Internet. Reply with quote
Authentication type PPPoE, to raise the necessary internet tagged vlan 1082. Without raising vlan Internet will not. IPTV multicast walks without vlan. On the bridge console to a WAN port on any dedicated port LAN.
I have the dir-320 A2. And with the native firmware and under the dd-wrt to raise the vlan can not. It would be in the IPTV vlan problems hike would not be. Set up under the console as well as from the Web interface.

1fb07d46a494.jpg
 Description:
 Filesize:  3.12 MB
 Viewed:  4058 Time(s)

1fb07d46a494.jpg
c8b3b29eb68c.jpg
 Description:
 Filesize:  4 MB
 Viewed:  4058 Time(s)

c8b3b29eb68c.jpg


Last edited by dimon_dl333 on Thu Jan 15, 2015 2:27; edited 2 times in total
Back to top View user's profile Send private message
Sponsor
dimon_dl333
DD-WRT Novice


Joined: 05 Dec 2013
Posts: 19
PostPosted: Thu Jan 15, 2015 2:16    Post subject: Reply with quote
How to run a tagged vlan 1082?
I do like that.

In the Command Shell

Startup

Code:
vconfig add eth0 1082
ifconfig eth0 down
ifconfig eth0 up
ifconfig vlan 1082 down


Look
Code:

root@DD-WRT:~# ifconfig

vlan1082  Link encap:Ethernet  HWaddr 00:90:4C:C0:00:01
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:216 (216.0 B)



Next, look and see VID. Added correct VID ?, And whether this VLAN VID and VLAN VID is it?

Code:
root@DD-WRT:~# cat /proc/net/vlan/config
VLAN Dev name    | VLAN ID
Name-Type: VLAN_NAME_TYPE_PLUS_VID_NO_PAD
vlan0          | 0  | eth0
vlan1          | 1  | eth0
vlan2          | 2  | eth0
vlan15         | 15  | eth0
vlan1082       | 1082  | eth0


Next, in the WAN Port Assignment exhibition vlan1082.

Code:
root@DD-WRT:~# plugin /usr/lib/rp-pppoe.so
nic-vlan1082
noccp
nomppc
noipdefault
noauth
defaultroute
noaccomp
nobsdcomp
nodeflate
nopcomp
nomppe
usepeerdns
user '***'
password '***'
default-asyncmap
mtu 1492
mru 1492
persist
lcp-echo-interval 5
lcp-echo-failure 10


I understand how I created not tagged VLAN. And as he was now tied to the port?

Judging by

Code:
root@DD-WRT:~# nvram show | grep vlan.ports
vlan6ports=
vlan4ports=
vlan0ports=1 2 3 4 5*
vlan9ports=
vlan7ports=
vlan5ports=
vlan3ports=
vlan1ports=0 5
size: 20624 bytes (12144 left)
vlan8ports=


Why only 10 VLAN-s? Even if you put in VLAN 15 http://192.168.1.1/Vlan.asp VLAN-s still 10.
Back to top View user's profile Send private message
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum