Joined: 24 Feb 2013 Posts: 1634 Location: Belgrade
Posted: Tue Dec 23, 2014 13:30 Post subject:
omarali53@gmail.com wrote:
Router Model TP Link Archer C7 V2:
======================================
WPA-2 Enterprise with external Freeradius server settings are not working once the AP is given a reset. I have to push "Apply Settings" and "Save" button again to make it functional.
Infact all builds after 23/06/2014 have this issue. I am amazed why you guys are ignoring my posts at this blog. This is 5th time I am reporting this issue.
Here is what BS replied to you on TRAC:
Quote:
this is a hostapd issue. set the retry limit to 60 and it goes faster. on bootup it has no network connection, so hostapd will sleep for a while until it tries again. 600 seconds here as shown in your picture. i'm aware of this and currenty trying to fix it. but its a hostapd bug or lets say. bad behaviour
Status: ok
Reset: yes / no
Errors: repeater mode will work for a couple of hours, after this time, the router hangs. Have to reboot ist. This is only in Client Bridge (routed) Mode.
AP is a FB 7490k on channel 13 with 20+20 Mhz enabled !
Tried it with and without reset ... its the same !
Status: ok
Reset: yes / no
Errors: repeater mode will work for a couple of hours, after this time, the router hangs. Have to reboot ist. This is only in Client Bridge (routed) Mode.
AP is a FB 7490k on channel 13 with 20+20 Mhz enabled !
Tried it with and without reset ... its the same !
The last version, that works on TL-WR1043ND v. 1.X is 25309.
Joined: 03 Jan 2010 Posts: 7568 Location: YWG, Canada
Posted: Wed Dec 24, 2014 8:30 Post subject:
SYN1ST3R wrote:
dudu1505 wrote:
now I have to buy other equipment , because I do not how to connect a serial cable on the PCB to try to recover that shi*
That is a risk you take with 3rd party beta firmware unfortunately.
i dont ever see ddwrt making it past "beta"..too much fragmentation between routers, too many routers to support, dev team too small, dev team has a hard time listening to users (toovague, worksforme, invalid are what most tickets get even when u KNOW ur right), "simple" things like updating gui for modern widescreen support WITH THE DEFAULT THEME (caps'd cause 95% use it, not the 1 or 2 other messy gui themes that support widescreen). etc.. _________________ LATEST FIRMWARE(S)
BrainSlayer wrote:
we just do it since we do not like any restrictions enforced by stupid cocaine snorting managers
now I have to buy other equipment , because I do not how to connect a serial cable on the PCB to try to recover that shi*
That is a risk you take with 3rd party beta firmware unfortunately.
i dont ever see ddwrt making it past "beta"..too much fragmentation between routers, too many routers to support, dev team too small, dev team has a hard time listening to users (toovague, worksforme, invalid are what most tickets get even when u KNOW ur right), "simple" things like updating gui for modern widescreen support WITH THE DEFAULT THEME (caps'd cause 95% use it, not the 1 or 2 other messy gui themes that support widescreen). etc..
I absolutely agree with this statement. In addition, I think updating the Linux kernel(s) as soon as a new one comes out is not good practice, without first testing adn waiting for some feedback. What happens is this: some non-kernel related bugs are being fixed (slowly, but they ARE fixed), but a few days pass by and a new kernel comes out, so Brainslayer updates it more-or-less instantaneously and then new bugs pop up, incompatibilities, etc.
So there's basically no such thing here as a relatively long-standing stable development, with continuous bug-fixing.
The most basic code changes over night, so no strong control over stability is possible.
Look at OpenWRT, they do it closer to the "spirit" of good code development practice... _________________ THERE ARE NO STRANGERS HERE; ONLY FRIENDS YOU HAVEN'T YET MET.
________________________________________________________________________________________________________
DD-WRT CHANGELOG | DEVICES | DD-WRT BUILDS | KONG BUILDS | UNOFFICIAL BUILDS | DD-WRT in VIRTUALBOX
Status: ok
Reset: yes / no
Errors: repeater mode will work for a couple of hours, after this time, the router hangs. Have to reboot ist. This is only in Client Bridge (routed) Mode.
AP is a FB 7490k on channel 13 with 20+20 Mhz enabled !
Tried it with and without reset ... its the same !
The last version, that works on TL-WR1043ND v. 1.X is 25309.
Yeah absolut correct !!! So I dont have to check for updates here ... 25309 is final to this device. Thanks buddy
