This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build. (eg: 25544_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless.
If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build. _________________ [I prefer answere in whole sentence]
On the 12/2 release I was getting random wifi disconnects. On the 12/3 release getting random wan disconnects, also EOIP was not working. _________________ Please Fix The Following Bugs:
EOIP Settings not applied automatically after FW upgrade or reboot. http://svn.dd-wrt.com/ticket/4061
The port 80 forwarding bug with out reapplying settings appears to have been fixxed.
Netgear r6300v2 can't get more than 5.5Mbps on the 2.4ghz set on channel 6 (only one on it), width 20hz.
My connection is 30/5. _________________ I am far from a guru, I'm barely a novice.
Netgear R7000 running DD-WRT BS 25648 with wl0_ampdu=off as Router
ASUS AC66U running DD-WRT Kong 23900 OLDD downclocked to 500 MHz as Repeater
ASUS N66U running 374.43_2 MerlinWRT with BL1.09 downclocked to 500MHz as WET for my Mainmachine
Linksys E2000 running Tomato v121 as WET for my Synology DS214play and Minix Neo X7 Mini
Upgraded an asus ac68u and one asus rt-n16. Everything seem to run well but too early to tell about the reboot stability of the ac68u. Current uptime about 3h.
Wifi speed good on both bands.
Update: Still have reboot issues on the ac68u, rebooted first time after approx 16 hours uptime, now seldom get more than 4 hours between reboots. _________________ Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
Last edited by wabe on Sat Dec 06, 2014 13:43; edited 2 times in total
No WAN access (DHCP or fixed IP tested). Reverting to older dd-wrt builds (ex 24160), the WAN problem persists. Flashing OEM firmware restores WAN. Upgrading to dd-wrt r25309 - WAN ok, but flashing from working WAN builds (OEM 1.1.28.146856 or r25309) -> any one of 25408, 25527, or 25544 breaks WAN.
ssh is ok;
WiFi is ok;
LAN is ok;
Last edited by colnago on Fri Dec 05, 2014 4:55; edited 1 time in total
Joined: 26 Apr 2011 Posts: 203 Location: Sacramento CA
Posted: Fri Dec 05, 2014 1:41 Post subject: Netgear R6300v2
Once again upgraded my R6300v2 without a reset. Moved from r25527 to r25544. After a little over 24 hours every feature I use is working as advertised. Features specifically tested:
WAN -- OK
LAN -- OK
DDNS -- OK
miniDLNA -- OK
2.4 and 5G Wifi -- OK
PPTP Server -- OK
SSH -- OK
FTP -- OK
USB Storage (EXT Thumbdrive, NTFS 3Tb HD) -- OK
Samba -- OK
DHCP -- OK
I forgot to add: my E4200 is bridged by Ethernet cable to another router, so I did not test its DHCP client. _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)