error 18005 Upgrade unsuccessfully

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
dhirajranger
DD-WRT Novice


Joined: 26 May 2013
Posts: 3

PostPosted: Sun May 26, 2013 18:10    Post subject: error 18005 Upgrade unsuccessfully Reply with quote
hello i am new to dd-wrt and have an i-ball router

after searching a lot i came to know it is a TP-link
wr741nd or wr743nd (when i open firmware provided by company it has tp-link technologies written in it)

problem is when i try to upload dd-wrt it says

Error code: 18005. Upgrade unsuccessfully because the version of the upgraded file was incorrect. Please check the file name.


i tried to change the file name but that doesn't solve anything also original firmware works with any name i am also unable to install firmware from tp-link.also tftp gets timed out (tried like 100 times)

attached images of my router and orignal bin file
pls help
Sponsor
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7632

PostPosted: Mon May 27, 2013 0:16    Post subject: Reply with quote
It is a rebranded TP-Link WR741v1, vendor software locked.
Here is the dd-wrt firmware for it:
dhirajranger
DD-WRT Novice


Joined: 26 May 2013
Posts: 3

PostPosted: Mon May 27, 2013 10:57    Post subject: Reply with quote
thanks for help it upgraded but now i am unable to access router login page. this noob will appreciate a little more help
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7632

PostPosted: Mon May 27, 2013 11:16    Post subject: Reply with quote
http://192.168.1.1
dhirajranger
DD-WRT Novice


Joined: 26 May 2013
Posts: 3

PostPosted: Mon May 27, 2013 11:39    Post subject: Reply with quote
[update] oh it was silly of me just did ipconfig\release and it worked like charm thanks man you made my day

one problem though apply.cgi works only with IE not firefox is it a known bug
ppai
DD-WRT Novice


Joined: 04 Nov 2013
Posts: 1

PostPosted: Mon Nov 04, 2013 6:48    Post subject: Reply with quote
hi,I am a novice as well. my ball router model is wrx150n. Do you have the same model. if no, can you recommend me which firmware to use. thanks.
xpiolx
DD-WRT Novice


Joined: 20 Feb 2014
Posts: 2

PostPosted: Thu Feb 20, 2014 20:37    Post subject: Reply with quote
I discovered that my router is the same as this TP-Link WR741ND (board seems similar as yours).

But I tried this firmware (factory-ddwrt.bin) and my router still says that the is wrong file. Already tried this: http://wiki.openwrt.org/toh/rosewill/rnx-n150rt and same message.

Even TP-Link original firmware doesn't work. I tried v1 and v2 firmwares. (Pictures of my router are identical as Rosewill RNX-N150RT).

Router Name: Multilaser RE027
Version Firmware: 3.9.18 Build 100719 Rel.36350n
Version Hardware: RE027 v1 00000000

Anybody have idea of which firmware I should use? (Or which method to flash...)


Off topic question: This router have USB host support (http://wiki.openwrt.org/toh/tp-link/tl-wr741nd#usb.host.mod) and I checked that DD-wrt have tab configuration for USB storage. Installing the last dd-wrt mod, my router will work with any usb drive attached to it?

Regards,
xpiolx
DD-WRT Novice


Joined: 20 Feb 2014
Posts: 2

PostPosted: Fri Feb 21, 2014 17:04    Post subject: Reply with quote
Updade:

I updated my router firmware with last TP-Link firmware.

I discovered the HW ID of Multilaser is 00280001, so all that you need to do is change this on original firmware from tp-link (just for the first time).
Then update via web-browser.
https://forum.openwrt.org/viewtopic.php?pid=168045#p168045

What I did:
0)Download software firmware hw id modifier.exe.
1)Download first version of original tp-link (TL-WR741ND_V1_100312).
2)Change HW ID with the software (firmware hw id modifier.exe) to 07410001 - 00280001.
3)Update by web-browser (cable, no wireless) this firmware modified.
4)Router restarts TP-Link original.
5)Download last version original (TL-WR741ND_V1_100910) e do the update (now, you don't need change HW ID, only for the first time).
6) DONE ! Router TP-Link last update Original.

Now, the router have original firmware from TP-Link. All others update(dd-wrt, openwrt) will be done with no problems.
botterbloem
DD-WRT Novice


Joined: 24 Jun 2013
Posts: 6

PostPosted: Tue Nov 25, 2014 14:35    Post subject: Did the trick on ICIDU NL-707517 Reply with quote
I did exactly the same as xpiolx, but then I used another hardware / vendor ID for this ICIDU Router with silkscreened on the PCB: 11N Wireless Router-6 (AR11) A REV:1.0. I discovered you have to use 00100001 I also found by googling you can use ID 00050001 for Siroco. Other HW / vendor ID's can be discovered by changing the last numbers of the first 4 numbers, this way:

00010001
00020001
00030001
00040001
00050001 (Siroco)
...
00100001 (ICIDU)
...
00280001 (Multilaser)
...

Attached is the file to change the ICIDU 150N to TP-Link firmware by firmware upgrade on the administration page of the router.
Qub1
DD-WRT Novice


Joined: 18 May 2014
Posts: 8

PostPosted: Wed Mar 18, 2015 23:26    Post subject: Re: Did the trick on ICIDU NL-707517 Reply with quote
botterbloem wrote:
I did exactly the same as xpiolx, but then I used another hardware / vendor ID for this ICIDU Router with silkscreened on the PCB: 11N Wireless Router-6 (AR11) A REV:1.0. I discovered you have to use 00100001 I also found by googling you can use ID 00050001 for Siroco. Other HW / vendor ID's can be discovered by changing the last numbers of the first 4 numbers, this way:

00010001
00020001
00030001
00040001
00050001 (Siroco)
...
00100001 (ICIDU)
...
00280001 (Multilaser)
...

Attached is the file to change the ICIDU 150N to TP-Link firmware by firmware upgrade on the administration page of the router.


I know this is an old thread but I'm all out of options. Do you happen to know the Hardware ID of an ICIDU NI-707533 (rebranded TP-Link TL-WR1043ND)? I've tried 10430001 and almost every variation I can think of but it's not working. Thanks!
botterbloem
DD-WRT Novice


Joined: 24 Jun 2013
Posts: 6

PostPosted: Mon Mar 23, 2015 10:46    Post subject: Reply with quote
Your ICIDU 300N gigabit router is a total different router then the icudu 150N NI-707517, rebranded TP-Link WR741v1 this topic is handling about. So you probably have to look in another topic.
lilrabbit129
DD-WRT Novice


Joined: 26 Jan 2016
Posts: 2

PostPosted: Tue Jan 26, 2016 7:09    Post subject: Same problem Reply with quote
I'm having the same issue. Rosewill RNX-N150RT. Tried to upgrade using the above instructions and got the listed above.

I couldn't quite figure out how the person fixed it. Is there a firmware with the correct ID already modified? If not, are there instructions on how to do this?
lilrabbit129
DD-WRT Novice


Joined: 26 Jan 2016
Posts: 2

PostPosted: Tue Jan 26, 2016 18:32    Post subject: Reply with quote
Oops figured it out. Once I logged in to the forum, many more options could be seen. A quick search showed me the right firmware I needed.
ustoopia
DD-WRT Novice


Joined: 02 Apr 2016
Posts: 1

PostPosted: Sat Apr 02, 2016 12:26    Post subject: Re: Did the trick on ICIDU NL-707517 Reply with quote
botterbloem wrote:
I did exactly the same as xpiolx, but then I used another hardware / vendor ID for this ICIDU Router with silkscreened on the PCB: 11N Wireless Router-6 (AR11) A REV:1.0. I discovered you have to use 00100001 I also found by googling you can use ID 00050001 for Siroco. Other HW / vendor ID's can be discovered by changing the last numbers of the first 4 numbers, this way:

00010001
00020001
00030001
00040001
00050001 (Siroco)
...
00100001 (ICIDU)
...
00280001 (Multilaser)
...

Attached is the file to change the ICIDU 150N to TP-Link firmware by firmware upgrade on the administration page of the router.


I just wanted to thank Boterbloempje for this file because before I registered on this site I had no idea the files could be downloaded here, so I spent more time than I wanted searching the allmighty internet for the hardware id change software and correct firmware. So thanks again!

I uploaded his customized bin file and the router (what also used to be a ICIDU 150N NI-707517 ) is now running fine on the tp-link firmware. But not for long. Smile
sids69
DD-WRT Novice


Joined: 02 Jul 2016
Posts: 1

PostPosted: Sat Jul 02, 2016 19:37    Post subject: Ibaton 150M Reply with quote
Guys need can someone help me how to flash dd wrt image for my iball router,i have tried tftp but it doesnt reset and hence cannot flash the file. the upgrade in the default gateway says its wrong file name with error 18005
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum