[Val532]

Hi,

I use DD-WRT for some years now.

And I have since a few months a router EA6900 on DD-WRT build 23838 but i can't upgrade to a newer version.

Somebody can help me ?

I tried with ftp BrainSlayer-V24-preSP2/2014/06-23-2014-r24461/linksys-ea6900/linksys-ea6900-webflash.bin but it dont upgrade.

Thanks

[Val532]

Some body can help me ?

I tried to reset to default parametre, but it does not work.

Can i upgrade with ssh ?

[errman]

I think you should revert back to original firmware then flash the new build. At least that's what I usually do in similar cases. Or try downloading the ddwrt firmware again 'cause it could be downloaded with some errors...

[Val532]

Thanks,

But i don't know how to do that ^^.

Is it possible to update by ssh ?

[Val532]

Hi,

Sorry for the new post, but i do not found a solution.

Is someone can help me ?

[cdmarshall]

There is a manual upgrade you have to do sometimes., I just had to do it on my ea6900 to get to kongs latest. I am busy right now but will post the how to later today : ) its not hard from the command line

[cdmarshall]

I suddenly got time LOL

[/url]http://www.dd-wrt.com/wiki/index.php/Installation/it#Method_3:_Flashing_with_Command_Line[url]

is a url linking to some instructions there is a change though the guide says

write dd-wrt.v2x_generic.bin linux

but it should be

mtd write dd-wrt.v2x_generic.bin linux

so what you would do to run the latest Kong firmware such as me is on my ea6900

cd /tmp
wget http://desipro.de/ddwrt/K3-AC-Arm/24865M/dd-wrt.v24-K3_AC_ARM_STD.bin

mtd write dd-wrt.v24-K3_AC_ARM_STD.bin

and then reboot. Personally I always issue

erase nvram
reboot

myself I feel this gives me the greatest chance of success, down side is setting everything up again but I have all the scripts and files saved to run so it no real issue for me.

let me know if you have any other questions.

[/url]

[_Robb_]