Collision between UPnP and manual port forward

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
eaglex
DD-WRT Novice


Joined: 17 Jun 2014
Posts: 1

PostPosted: Tue Jun 17, 2014 11:45    Post subject: Collision between UPnP and manual port forward Reply with quote
Firmware: DD-WRT v24-sp2 (03/25/13) mega
Router: Linksys E3200

Hey guys,

I have a manual port forward (tcp, 80 -> 192.168.0.40:80) that was created from the web interface.

Sometimes it stops working because skype requests a port forward (tcp, 80 -> 192.168.0.230:38941) via UPnP, which appears to override my first port forward, leaving the web server inaccessible.

I'd like to keep the UPnP service enabled, but I'd also like to keep my port 80 forward working properly.

What can I do?
Sponsor
crashfly
DD-WRT Guru


Joined: 24 Feb 2009
Posts: 2026
Location: Sol System > Earth > USA > Arkansas

PostPosted: Wed Jun 18, 2014 3:56    Post subject: Reply with quote
Unfortunately, there is very little you can do to fix that. DD-WRT is set up in such a way that all UPnP port forwards take precedence over any manual port forwards.

Short of turning off UPnP all together (and then setting up all manual port forwards), there is little else you can do.

_________________
E3000 22200M KongVPN K26
WRT600n v1.1 refirb mega 18767 BS K24 NEWD2 [not used]
WRT54G v2 16214 BS K24 [access point]

Try Dropbox for syncing files - get 2.5gb online for free by signing up.

Read! Peacock thread
*PLEASE* upgrade PAST v24SP1 or no support.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum