Hey guys, I'm debating on this router to use with a directional panel antenna to shoot a signal about 80 yards away clear line of sight to another house. This is one of few DD-WRT routers that still use detachable RP-SMA jacks so that's why I'm looking at this one.
I know it's still new but is the build pretty stable to just use as an AP? No USB or firewall stuff needed.
Hey guys, I'm debating on this router to use with a directional panel antenna to shoot a signal about 80 yards away clear line of sight to another house. This is one of few DD-WRT routers that still use detachable RP-SMA jacks so that's why I'm looking at this one.
I know it's still new but is the build pretty stable to just use as an AP? No USB or firewall stuff needed.
Thanks
Hi,
I am using the build 02/04/2014. So far it is very stable, if you do not need USB support, go with that
Tried r23720, but still have USB detection problem with Tp-Link WR-842nd, HW Ver:2.1
dmesg after plug-in USB Printer:
<6>[ 941.790000] usb 1-1: new high-speed USB device number 6 using ar71xx-ehci
<4>[ 941.940000] usb 1-1: Using ep0 maxpacket: 8
<3>[ 941.940000] usb 1-1: device descriptor read/all, error 8
<6>[ 942.080000] usb 1-1: new high-speed USB device number 7 using ar71xx-ehci
<4>[ 942.240000] usb 1-1: Using ep0 maxpacket: 8
<3>[ 942.240000] usb 1-1: device descriptor read/all, error 8
<6>[ 942.380000] usb 1-1: new high-speed USB device number 8 using ar71xx-ehci
<4>[ 942.420000] usb 1-1: Using ep0 maxpacket: 8
<3>[ 942.430000] usb 1-1: device descriptor read/all, error 8
<6>[ 942.560000] usb 1-1: new high-speed USB device number 9 using ar71xx-ehci
<4>[ 942.590000] usb 1-1: Using ep0 maxpacket: 8
<3>[ 942.600000] usb 1-1: device descriptor read/all, error 8
<3>[ 942.610000] hub 1-0:1.0: unable to enumerate USB device on port 1
when totally tired of not being able to solve the problems, I tried to revert back to stock firmware.
Searched for a way and found this:
(https://www.dd-wrt.com/phpBB2/viewtopic.php?t=260713&sid=de27ad0f28fccdce56536c41240d0602)
and again no luck. web revert image dont work (upgrade failed)
tftp solution didnt worke either, No connectin being made between my tp-link and my pc.
I desperately need some help on this guys. Please!