Linksys E3200 Here - see page 2 for test build!

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... , 30, 31, 32  Next
Author Message
myname70
DD-WRT Novice


Joined: 06 Feb 2013
Posts: 40

PostPosted: Thu Jan 02, 2014 11:25    Post subject: Reply with quote
Guys, which is the latest DD-WRT fw version which still does not brick the router? I bricked it with 23082 and 23204....
Sponsor
slobodan
DD-WRT Guru


Joined: 03 Nov 2011
Posts: 1552
Location: Zwolle

PostPosted: Thu Jan 02, 2014 20:57    Post subject: Reply with quote
myname70 wrote:
Guys, which is the latest DD-WRT fw version which still does not brick the router? I bricked it with 23082 and 23204....

All December 2013 K26 builds will brick your router, if you are ready to unbrick it try a K3.x build. In doubt, stick to what you know it is working with your router, test builds are for the adventurous.

_________________
2 times APU2 Opnsense 21.1 with Sensei

2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)

3 times Asus RT-N16 shelved

E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)

3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)

padaboana
DD-WRT Novice


Joined: 28 Dec 2013
Posts: 11

PostPosted: Thu Jan 02, 2014 21:56    Post subject: Test K3.x 23138 Reply with quote
Hello!

After bricking my router with latest Dez. builds I ve tried the K3.x mega build without any issues.
It seems that the "load average" is a little bit higher then on my other e3200 which is running build 21036-mega >6 months! About 0.18 - 5 min / running the device for 20 min.
myname70
DD-WRT Novice


Joined: 06 Feb 2013
Posts: 40

PostPosted: Fri Jan 03, 2014 14:00    Post subject: Re: Test K3.x 23138 Reply with quote
padaboana wrote:
Hello!

After bricking my router with latest Dez. builds I ve tried the K3.x mega build without any issues.
It seems that the "load average" is a little bit higher then on my other e3200 which is running build 21036-mega >6 months! About 0.18 - 5 min / running the device for 20 min.


Hi please could you link to the K3 version you installed?
padaboana
DD-WRT Novice


Joined: 28 Dec 2013
Posts: 11

PostPosted: Fri Jan 03, 2014 17:42    Post subject: Download K3.x E3200 Reply with quote
http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/12-17-2013-r23138/broadcom_K3X/dd-wrt.v24-23138_NEWD-2_K3.x_mega-e3200.bin
nyrang3rs
DD-WRT Novice


Joined: 07 May 2013
Posts: 31

PostPosted: Fri Jan 03, 2014 19:12    Post subject: Re: Download K3.x E3200 Reply with quote
padaboana wrote:
http://dd-wrt.com/dd-wrtv2/downloads/others/eko/BrainSlayer-V24-preSP2/2013/12-17-2013-r23138/broadcom_K3X/dd-wrt.v24-23138_NEWD-2_K3.x_mega-e3200.bin


This is also working fine for me. One fyi though is you can't flash K3 unless you have a more recent K2 build.
ptesmoke
DD-WRT Novice


Joined: 03 Jan 2014
Posts: 1

PostPosted: Fri Jan 03, 2014 19:44    Post subject: Reply with quote
ok..so im running an E2000 on v24-sp2 (04/15/13) mega - build 21286 2.6 linux

can i upgrade to dd-wrt.v24-23204_NEWD-2_K3.x_mega-e2000??

or should i just stick with what im running?
slobodan
DD-WRT Guru


Joined: 03 Nov 2011
Posts: 1552
Location: Zwolle

PostPosted: Sat Jan 04, 2014 2:30    Post subject: Reply with quote
ptesmoke wrote:
ok..so im running an E2000 on v24-sp2 (04/15/13) mega - build 21286 2.6 linux

can i upgrade to dd-wrt.v24-23204_NEWD-2_K3.x_mega-e2000??

or should i just stick with what im running?

In my experience K3.x builds slash my download speed in half, so only use such build if you know what you are doing.

_________________
2 times APU2 Opnsense 21.1 with Sensei

2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)

3 times Asus RT-N16 shelved

E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)

3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)

nyrang3rs
DD-WRT Novice


Joined: 07 May 2013
Posts: 31

PostPosted: Sun Jan 05, 2014 7:13    Post subject: Reply with quote
slobodan wrote:
ptesmoke wrote:
ok..so im running an E2000 on v24-sp2 (04/15/13) mega - build 21286 2.6 linux

can i upgrade to dd-wrt.v24-23204_NEWD-2_K3.x_mega-e2000??

or should i just stick with what im running?

In my experience K3.x builds slash my download speed in half, so only use such build if you know what you are doing.


Earlier builds had download stalling problems. But I am running dd-wrt.v24-23138_NEWD-2_K3.x_mega-e3200.bin with no problems
messerchmidt
DD-WRT User


Joined: 11 Jan 2012
Posts: 171
Location: Canada

PostPosted: Sun Jan 05, 2014 7:53    Post subject: Reply with quote
does the 5ghz still not work with ddwrt?
Malitiacurt
DD-WRT User


Joined: 16 Aug 2012
Posts: 190

PostPosted: Sun Jan 05, 2014 12:32    Post subject: Reply with quote
5ghz never.

Fractal wrote:
Also was wondering if it would be possible to compile USB AP support to support the 5ghz radio on the e2500/e3200/ and ea2700


BrainSlayer wrote:
nope i will not support these shitty usb implemenations. no station support possible and i also have not any access to the full drivers. just some parts. these device may rest in peace in a dumphole of shit


http://www.dd-wrt.com/phpBB2/viewtopic.php?p=824666
myname70
DD-WRT Novice


Joined: 06 Feb 2013
Posts: 40

PostPosted: Tue Jan 07, 2014 20:24    Post subject: Reply with quote
Guys, I want to attach my SMARGO V2 smartreader to E3200 but need to install usbserial.o / ftdi_sio.c modules. I found here some zips with these modules, tried too use insmod to install them, but when checking with lsmod - do not list them... Please advise how to install? Or, what firmware should use to have them installed? (now I am with KingKong 20500M)
helvsmit
DD-WRT Novice


Joined: 08 Oct 2012
Posts: 12

PostPosted: Sun Mar 16, 2014 23:17    Post subject: http://www.desipro.de/ddwrt/K26/r22200/kingkong-nv60k-broadc Reply with quote
Hi all,

Can anyone advise me. I really want to use OTRW2 on my Linksys E3200 router. When I try to install now it comes with an error (original OTRW script) and when running OTRW2 it tells me that my build is to high.

I want to downgrade to another build but I'm not sure if this is possible. Also I consider Moving to: http://www.desipro.de/ddwrt/K26/r22200/kingkong-nv60k-broadcom.bin. but also not 100% sure if this is working.

Can somebody help me out with this?

Thanks !!
Ab

Linksys E3200
Firmware Versie DD-WRT v24-sp2 (03/25/13) mega - build 21061
Kernel Version Linux 2.6.24.111 #14326 Mon Mar 25 03:38:49 CET 2013 mips
slobodan
DD-WRT Guru


Joined: 03 Nov 2011
Posts: 1552
Location: Zwolle

PostPosted: Sun Mar 16, 2014 23:44    Post subject: Re: http://www.desipro.de/ddwrt/K26/r22200/kingkong-nv60k-br Reply with quote
helvsmit wrote:
Hi all,

Can anyone advise me. I really want to use OTRW2 on my Linksys E3200 router. When I try to install now it comes with an error (original OTRW script) and when running OTRW2 it tells me that my build is to high.

I want to downgrade to another build but I'm not sure if this is possible. Also I consider Moving to: http://www.desipro.de/ddwrt/K26/r22200/kingkong-nv60k-broadcom.bin. but also not 100% sure if this is working.

Can somebody help me out with this?

Thanks !!
Ab

Linksys E3200
Firmware Versie DD-WRT v24-sp2 (03/25/13) mega - build 21061
Kernel Version Linux 2.6.24.111 #14326 Mon Mar 25 03:38:49 CET 2013 mips

According to http://www.desipro.de/ddwrt/K26/ReadMe , it should work.

_________________
2 times APU2 Opnsense 21.1 with Sensei

2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)

3 times Asus RT-N16 shelved

E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)

3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)

philm01
DD-WRT Novice


Joined: 12 Aug 2014
Posts: 1

PostPosted: Tue Aug 12, 2014 20:27    Post subject: Reply with quote
Hello everyone,

I recently bought a Linksys E3200 with Firmware v3.0.

I have a quick question, which version of DD-WRT is best for my router?

Now, I remember reading that V3 is different then the others but I was unable to find a tutorial for V3.00. So, I was wondering if anyone was able to get it working with firmware v3.0 and if they could help me through the process.

Thank you
Goto page Previous  1, 2, 3 ... , 30, 31, 32  Next Display posts from previous:    Page 31 of 32
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum