Joined: 22 Jul 2006 Posts: 68 Location: Earth 33 43 50 N 117 58 33 W 33.7306m -117.9759m
Posted: Fri Dec 15, 2006 3:42 Post subject:
It is meant for the developers so that they can include support for the chip. _________________ WRT350NV1 Firmware: v24
(Current) std
Actiontec MI424WR: Future?
I also have a TCOM AH4222 router and I'm looking forward your port for those.
Thanks a lot for working hard having us a good time with our stuff !
Can we think for a port in a short time or have we to expect long development / testing time ? (Tough i'm ready to try your things if it needs to, I'll be glad to help you as tester, tough I have no time to help in the developpment things because working in a lot of other projects for my studies).
I'm also waiting for the port. The current firmware doesn't work properly and until now it isn't more than a pink toy. After several hours of working with it I'm really frustrated.
Fortunately there is dd-wrt which I already installed on an other router in my network. It works fine and does everything that's needs to be done (and even much more).
Go on working on this project! I would be really thankful for a fully workingl firmware...
Posted: Tue Jan 16, 2007 17:21 Post subject: Me too!
Hey guys,
I've got a machine with the same architecture: TARGA WR 500 (equals W500V). I'd be happy, if you guys would port dd-wrt to that platform too. Donation would go without saying.
The same here ! I would not miss a donation if the portage's done ! I have a point hat is to pay what is well done, your platform look awesome and I really want to use it and not the stupid firmware I already have. Okay, it is not that bad but there is peace of **** in it. Sorry for the way saying it, but there is a NAT port redirection system very well done and well thought but... No way to assign static IP's to some MAC ADDRESS on the network so you have a choose between DHCP and NAT but the two together are not to be thought of ! Ridiculous indeed isnt'it ?
I've bought some Thomson SpeedTouch 716v5 (WL)
They're ADSL2+ modem, based on CPU BCM6348, LAN BCM5325, WLAN BCM94318MPG, 4Mb Flash, 16Mb RAM.
Also they have 2 FXS ports, and 1 FXO.
They works very well with original firmware... but I think they can do better with dd-wrt!
If someone has a trick to install it, please tell me!
******************************************************************
Pictures of the board (SL2-141-I):klick here!!!
******************************************************************
I hope to be helpful!
Greetz Kai
Last edited by xKai666x on Sat Jun 23, 2007 12:33; edited 6 times in total
You say before, the drivers of ethernet, wlan, ADSL2 are in binary format, it's true but
i think broadcom have not change the Ethernet hardware in BCM9363XX, for me
the driver of BCM5347 is the same of the 9363XX. The only difference is the Big Endian and some minor issues.
Is it possible to compile 5354 Ethernet driver for 63XX?
I've some Thomspn 716v5 (my office, my home and many friends have this modem/router) ...... If I can help you to develop a firmware for this Router, please inform me. I can make any type of test for You ....
I reead that this modem is the same of NetComm NB9W ...... I don't know if this is useful for you .... I've try to download the NB9W Firmware but I'm unable to install on Thomson 716