EA6500 V2

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
techieanalyst
DD-WRT Novice


Joined: 30 Dec 2013
Posts: 3

PostPosted: Mon Dec 30, 2013 6:19    Post subject: EA6500 V2 Reply with quote
Installed DD WRT and noticed that with a few tweaks I brought my 2.4Ghz Wireless speeds to 100 - 120MBits, however my 5.0 I cant seem to get the speeds above 54 Mbits

Frame Burst is Disabled, Security is set to WPA2 and AES, WMM is disabled.

Tested Mixed and Fixed modes, changed Channel and Frequency
Sponsor
Malitiacurt
DD-WRT User


Joined: 16 Aug 2012
Posts: 190

PostPosted: Mon Dec 30, 2013 6:57    Post subject: Reply with quote
Enable WMM.

http://www.smallnetbuilder.com/wireless/wireless-features/30938-dont-mess-with-wmm
techieanalyst
DD-WRT Novice


Joined: 30 Dec 2013
Posts: 3

PostPosted: Mon Dec 30, 2013 7:16    Post subject: Reply with quote
Didnt change anything, I did change the channel to the upper 150s and now both are getting around 100Mbits on both 2.4 and 5.0
techieanalyst
DD-WRT Novice


Joined: 30 Dec 2013
Posts: 3

PostPosted: Mon Dec 30, 2013 17:34    Post subject: Reply with quote
Anyone have recommended settings to get the most from wireless possibly?
_Robb_
DD-WRT User


Joined: 14 Jan 2012
Posts: 324
Location: Wr PL

PostPosted: Mon Dec 30, 2013 23:28    Post subject: Reply with quote
Please give details about your devices (network cards, ...)

The following works for me.

Administration -> Commands - startup scripts:
Code:
echo 262144 > /proc/sys/net/core/rmem_max
echo 262144 > /proc/sys/net/core/wmem_max
echo "4096 16384 262144" > /proc/sys/net/ipv4/tcp_wmem
echo "4096 87380 262144" > /proc/sys/net/ipv4/tcp_rmem
echo 1000 > /proc/sys/net/core/netdev_max_backlog


Wireless -> Basic Settings
Set channel width to 80MHz.
For testing set only N.

Wireless -> WL1 Advanced
Frame Bust: Enabled
Preamble: Short
Shorslot overide: Short
TX Power: 40
WMM: Enabled
No-Acknowledgment: Enabled

_________________
http://www.speedtest.net/result/3915993898.png

DO NOT 30-30-30 or erase nvram newer routers! It can brick them.

EA6700: Build 27745 (nvram below 32K, ipv6 - HE 6in4)
E4200: Build 26587
WRT54GL: Retired - waiting in the closet for an emergency.
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum