WRT54GL v1.0: preparation to the JTAG modification.

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
booBot
DD-WRT Novice


Joined: 22 Sep 2006
Posts: 12

PostPosted: Thu May 17, 2007 17:29    Post subject: WRT54GL v1.0: preparation to the JTAG modification. Reply with quote
There are no RH2, RH3, RH4, RH5, RH7, RG1 resistors soldered close to the connector placeholder.
Only the RH8 is there (4k7).

Do I need to solder them to be able to use JTAG?

(WRT54GL v1.0, SN#CL7A0F101902)

_________________
OpenWRT RC6 powered WRT54GL v1.0 (64MB RAM mod)
RT31P2-EU(v1.30.07/v3.1.09LId)
Sponsor
anectine17
DD-WRT Guru


Joined: 07 Jun 2006
Posts: 1535
Location: Idaho

PostPosted: Thu May 17, 2007 18:14    Post subject: Reply with quote
Nope......just solder a 12-pin header to the port. The resistors are there, plus your JTAG cable should have 100ohm resistors on TDI, TDO, TMS and TCK. We do it all the time. Go forth and debrick!!
_________________
Clear 4G Wimax.
Linksys WRT54G-TM w/14929 std-nokaid, fan-cooled, 2 GB SD mod, Primary Router.
Linksys WRT54G v.3 w/15230 std-nokaid, Client Bridge.
Linksys E2000 w/15200 "Big"
Linksys WRT54G v.4
La Fonera 2100, fan-cooled
Linksys WRT54G v.3.1
Linksys WRT54G v.1.1
Linksys WRT54GS v.1
2x Linksys WRT54G v.2.2

Peacock Thread - READ THOROUGHLY
booBot
DD-WRT Novice


Joined: 22 Sep 2006
Posts: 12

PostPosted: Thu May 17, 2007 18:31    Post subject: Reply with quote
anectine17 wrote:
Go forth and debrick!!

Smile
No, I'm not debricking it (yet), I'm going to replace the FLASH chip now.
(BTW, the RAM upgrade was half-successfull: from the 64MB expected I see only 32MB available...)

_________________
OpenWRT RC6 powered WRT54GL v1.0 (64MB RAM mod)
RT31P2-EU(v1.30.07/v3.1.09LId)
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum