So, is this a beta dd-wrt firmware for the EA6700?
I'm desperate to get dd-wrt on my EA6700 as it will enable me to replace my current UK Sky Router that has a username & password built into the firmware.
In most cases the only way to replace the Sky Router is to use another router with dd-wrt installed.
So, is this a beta dd-wrt firmware for the EA6700?
I'm desperate to get dd-wrt on my EA6700 as it will enable me to replace my current UK Sky Router that has a username & password built into the firmware.
In most cases the only way to replace the Sky Router is to use another router with dd-wrt installed.
No, this is the build software for OEM firmware it is useful for making modifications to the OEM firmare and adding support for dd-wrt.
Hopefully dd-wrt will be ported quite soon (fingers crossed). The Linksys EA6500 is currently in beta & I cant really see the difference between the EA6500 & the EA6700, Hopefully the 1 GHz Cortex-A9 CPU used in the EA6700 wont cause an issue.
Managed to recompile EA6700 firmware with dropbear.
Router has like 64 megs of JFFS storage!!!!!
working on porting IPKG to it.
Yeah, that's his firmware build I posted it should flash like normal to the router, my previous reference may not have been clear on what I was talking about. Dropbear gives a command line etc while the GPL tarball allows firmware modifications to be made and allows the construction of new firmware images such as that one with Dropbear.
I'm a complete newbie when it comes to the firmware etc.
You mentioned that the link above has 'Dropbear' (?) & that it gives a command line. Is this similar to the command line in dd-wrt found under 'Administration' > 'Command'?
I'm a complete newbie when it comes to the firmware etc.
You mentioned that the link above has 'Dropbear' (?) & that it gives a command line. Is this similar to the command line in dd-wrt found under 'Administration' > 'Command'?
This is so I can replace my Sky router with the EA6700 I have.
Or is it something complete different & I need to wait for dd-wrt to be port?
Thanks.
Dropbear provides a command line via SSH I believe, try logging on with putty and see if that works. It will not add a command line option from the standard webui though.