Posted: Sat Oct 05, 2013 16:03 Post subject: WR1043 und OpenVPN CLIENT Mode
Hallo zusammen,
ich versuche (bisher über telnet) eine openvpn Verbindung vom Router zu CyberghostVPN einzurichten. die Zertifikate liegen auf einem USB-Stick. Von der Konsole aus führe ich folgenden Befehl aus:
Code:
openvpn --config /mnt/sda_part1/cg/client.ovpn
Dann gebe ich meine Zugangsdaten ein und der Router versucht sich zu verbinden...
Code:
root@DD-WRT:/tmp/mnt/sda_part1# openvpn --config /mnt/sda_part1/cg/client.ovpn
Sat Oct 5 17:47:35 2013 OpenVPN 2.3.0 mips-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Mar 25 2013
Enter Auth Username:xxx
Enter Auth Password:
Sat Oct 5 17:47:49 2013 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Sat Oct 5 17:47:49 2013 WARNING: file '/mnt/sda_part1/cg/xxx.key' is group or others accessible
Sat Oct 5 17:47:49 2013 UDPv4 link local: [undef]
Sat Oct 5 17:47:49 2013 UDPv4 link remote: [AF_INET]79.141.167.28:9081
Sat Oct 5 17:47:49 2013 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Sat Oct 5 17:47:57 2013 [Server] Peer Connection Initiated with [AF_INET]79.141.167.28:9081
Sat Oct 5 17:47:59 2013 TUN/TAP device tun0 opened
Sat Oct 5 17:47:59 2013 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
Sat Oct 5 17:47:59 2013 /sbin/ifconfig tun0 10.129.34.70 pointopoint 10.129.34.69 mtu 1500
Sat Oct 5 17:48:04 2013 Initialization Sequence Completed
Sat Oct 5 17:49:46 2013 event_wait : Interrupted system call (code=4)
Sat Oct 5 17:49:46 2013 /sbin/ifconfig tun0 0.0.0.0
Sat Oct 5 17:49:46 2013 SIGINT[hard,] received, process exiting
...und bricht an dieser Stelle ab. Meine Zugangsdaten werden angenommen aber ich weiß einfach nicht was der Fehlercode