New Build - 24/07/2013 - r22118

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3, 4, 5 ... 15, 16, 17  Next
View previous topic :: View next topic  
Author Message
demoralized
DD-WRT User


Joined: 13 Apr 2013
Posts: 61
PostPosted: Fri Jul 26, 2013 17:21    Post subject: Reply with quote
Is there any specific reason why i can't install this firmware on my WRT160N v3?
Back to top View user's profile Send private message
Sponsor
dpp3530
DD-WRT Guru


Joined: 12 Dec 2007
Posts: 778
Location: Pittsburgh, PA USA
PostPosted: Fri Jul 26, 2013 19:38    Post subject: Reply with quote
WZR-600DHP, 48 hours with the new firmware, no issues. Did not do a reset.
_________________
__________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
Back to top View user's profile Send private message
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1634
Location: Belgrade
PostPosted: Fri Jul 26, 2013 20:41    Post subject: Reply with quote
just love Serbian ddwrt!!! Thanks Sebastian. If there is more serbians please give it a try...
Back to top View user's profile Send private message
SpOuK3
DD-WRT Novice


Joined: 27 Nov 2012
Posts: 9
PostPosted: Fri Jul 26, 2013 22:11    Post subject: USB Support Reply with quote
Hi,

Flashed DIR-825 rev.b with the new firmware... In USB, I have two USB Support ... One (top) have no settings and the other one, I have the radio button enable...


Looks like some settings or radio button are duplicate.
Back to top View user's profile Send private message
hancox
DD-WRT Novice


Joined: 13 May 2007
Posts: 36
PostPosted: Sat Jul 27, 2013 0:02    Post subject: Reply with quote
The WZR-HP-G450 is back! Woohoo!

Will test tomorrow...
Back to top View user's profile Send private message
basl
DD-WRT Novice


Joined: 16 Sep 2009
Posts: 5
PostPosted: Sat Jul 27, 2013 0:08    Post subject: Reply with quote
Router Model: Netgear WNDR3700v1
Status: Good
Reset: No reset after upgrade
Errors: My samba share isn't accessible anymore (reboot, re-entry or re-enable won't fix it)

Code:
--- /dev/sda1
Block device, size 3.780 GiB (4059232256 bytes)
Ext4 file system
UUID F213E660-CC29-4A5E-B74A-726BC350B6C8 (DCE, v4)
Volume size 3.780 GiB (4059230208 bytes, 991023 blocks of 4 KiB)
/dev/sda1 mounted to /tmp/mnt/sda1


UPDATE: Forgot to mention that I can see the share, but I'm not able to open it.

Last edited by basl on Sat Jul 27, 2013 13:07; edited 1 time in total
Back to top View user's profile Send private message
flippant
DD-WRT Novice


Joined: 28 Jul 2009
Posts: 15
PostPosted: Sat Jul 27, 2013 2:43    Post subject: Reply with quote
fixed

Last edited by flippant on Mon Jul 29, 2013 10:51; edited 1 time in total
Back to top View user's profile Send private message
Neocazen
DD-WRT Novice


Joined: 27 Jul 2013
Posts: 1
PostPosted: Sat Jul 27, 2013 3:48    Post subject: Reply with quote
So far everything seems normal a single problem, Led system off.TPLink 740n v4.
Sorry my English.

Last edited by Neocazen on Mon Jul 29, 2013 10:53; edited 1 time in total
Back to top View user's profile Send private message
spanman
DD-WRT User


Joined: 27 Sep 2008
Posts: 446
Location: Port Of Spain
PostPosted: Sat Jul 27, 2013 3:59    Post subject: Reply with quote
This is all I see in usb, I don't have the normal options from 21676
TP Link WDR3600 V1.1
_________________
Buffalo WZR-600DHP - 23838
TP Link WDR3600 - 21676
Linksys WRT54G-TM - 12548 (NEWD Eko Mega)

Last edited by spanman on Sun Jul 28, 2013 0:38; edited 1 time in total
Back to top View user's profile Send private message Visit poster's website
John877
DD-WRT Novice


Joined: 22 Apr 2013
Posts: 21
PostPosted: Sat Jul 27, 2013 5:54    Post subject: Reply with quote
Whats new/fixed in this version?

Those with the Netgear WNDR3800 did you just go to the firmware upgrade tab and just upgrade it with the webflash.bin file or was there something else and what about settings? Did you have to redo settings or were they all there still?
Back to top View user's profile Send private message
mazey
DD-WRT User


Joined: 05 Jun 2011
Posts: 232
PostPosted: Sat Jul 27, 2013 8:04    Post subject: Reply with quote
John877 wrote:
Whats new/fixed in this version?

Those with the Netgear WNDR3800 did you just go to the firmware upgrade tab and just upgrade it with the webflash.bin file or was there something else and what about settings? Did you have to redo settings or were they all there still?


i just upgrade using the webflash file and choose no reset then you will keep all the settings.
Back to top View user's profile Send private message
labrok
DD-WRT User


Joined: 11 Feb 2011
Posts: 297
Location: Greece
PostPosted: Sat Jul 27, 2013 12:26    Post subject: TL-WR 2542ND v1 Reply with quote
flashed without reset, no problem, wifi stable, seems better than previous version, 3 days haven`t suffer the cpu overload bug i had with previous versions and especially 21676 (sometimes after reboot load goes high and cannot connect to router,while metter shows traffic between router and clients about 100kb/s, connections are dead, and only manual reboot fixes it)
Back to top View user's profile Send private message
muheeb
DD-WRT Novice


Joined: 21 Jun 2006
Posts: 26
PostPosted: Sat Jul 27, 2013 12:37    Post subject: Re: New Build - 24/07/2013 - r22118 Reply with quote
Tobias Tromm wrote:
Please report errors on this topic.
Router Model:WHR-HP-G300N
Status: OK
Reset?: No
Errors:none

I configured wifi as WDS station but it will connect to WDS AP for few seconds and disconnect. Anyone else experincing the same?

it is working only with this version
Back to top View user's profile Send private message
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1634
Location: Belgrade
PostPosted: Sat Jul 27, 2013 18:05    Post subject: Reply with quote
On every hour I have wifi disconections... I cant see my SSID and I must restart router... I did 30/30/30 before upgrade, an I have default wireless settings.. here is my dmesg
Code:
<6>[    8.390000] cfg80211: Calling CRDA for country: US
<6>[    8.400000] cfg80211: Regulatory domain changed to country: US
<6>[    8.410000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[    8.410000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[    8.420000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[    8.430000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    8.440000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    8.440000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[    8.450000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[    8.460000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
<6>[   10.210000] device ath0 entered promiscuous mode
<6>[   10.220000] br0: port 1(vlan0) entered forwarding state
<6>[   10.220000] br0: port 2(ath0) entered forwarding state
<6>[   10.230000] br0: port 2(ath0) entered forwarding state
<4>[   11.060000] ag7100_ring_free Freeing at 0x81efc000
<4>[   11.060000] ag7100_ring_free Freeing at 0x81ce5000
<6>[   11.080000] br0: port 1(vlan0) entered disabled state
<4>[   11.090000] Writing 4
<6>[   11.100000] device eth0 left promiscuous mode
<6>[   11.100000] device eth0 entered promiscuous mode
<6>[   11.110000] br0: port 1(vlan0) entered forwarding state
<6>[   11.120000] br0: port 1(vlan0) entered forwarding state
<6>[   11.370000] device vlan1 entered promiscuous mode
<6>[   11.410000] device vlan1 left promiscuous mode
<6>[   12.230000] br0: port 2(ath0) entered forwarding state
<6>[   13.120000] br0: port 1(vlan0) entered forwarding state
<6>[   19.150000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
<6>[   19.150000]    Hooking IMQ before NAT on PREROUTING.
<6>[   19.160000]    Hooking IMQ after NAT on POSTROUTING.
<6>[   20.980000] IMQ driver unloaded successfully.
<6>[   22.820000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
<6>[   22.830000]    Hooking IMQ before NAT on PREROUTING.
<6>[   22.830000]    Hooking IMQ after NAT on POSTROUTING.
<3>[  174.860000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
<3>[  174.870000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<6>[  195.230000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
<6>[  261.320000] br0: port 1(vlan0) entered disabled state
<6>[  261.340000] device ath0 left promiscuous mode
<6>[  261.340000] br0: port 2(ath0) entered disabled state
<6>[  263.990000] device vlan0 left promiscuous mode
<6>[  264.040000] device vlan0 entered promiscuous mode
<6>[  264.040000] br0: port 1(vlan0) entered forwarding state
<6>[  264.050000] br0: port 1(vlan0) entered forwarding state
<6>[  266.050000] br0: port 1(vlan0) entered forwarding state
<6>[  266.540000] cfg80211: Calling CRDA to update world regulatory domain
<6>[  266.550000] cfg80211: World regulatory domain updated:
<6>[  266.560000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[  266.560000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  266.570000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[  266.580000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[  266.590000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  266.600000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  266.620000] cfg80211: Calling CRDA for country: US
<6>[  266.620000] cfg80211: Regulatory domain changed to country: US
<6>[  266.630000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[  266.630000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[  266.640000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[  266.650000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  266.660000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  266.670000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  266.670000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[  266.680000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
<6>[  269.530000] device ath0 entered promiscuous mode
<6>[  269.530000] br0: port 2(ath0) entered forwarding state
<6>[  269.540000] br0: port 2(ath0) entered forwarding state
<4>[  269.660000] ag7100_ring_free Freeing at 0x81efc000
<4>[  269.660000] ag7100_ring_free Freeing at 0x81ce5000
<6>[  269.670000] br0: port 1(vlan0) entered disabled state
<4>[  269.690000] Writing 4
<6>[  269.690000] device eth0 left promiscuous mode
<6>[  269.690000] device eth0 entered promiscuous mode
<6>[  269.700000] br0: port 1(vlan0) entered forwarding state
<6>[  269.700000] br0: port 1(vlan0) entered forwarding state
<6>[  271.540000] br0: port 2(ath0) entered forwarding state
<6>[  271.700000] br0: port 1(vlan0) entered forwarding state
<6>[  275.670000] device vlan1 entered promiscuous mode
<6>[  275.690000] device vlan1 left promiscuous mode
<6>[  279.310000] IMQ driver unloaded successfully.
<6>[  281.410000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
<6>[  281.410000]    Hooking IMQ before NAT on PREROUTING.
<6>[  281.420000]    Hooking IMQ after NAT on POSTROUTING.
<6>[  300.420000] br0: port 1(vlan0) entered disabled state
<6>[  300.440000] device ath0 left promiscuous mode
<6>[  300.440000] br0: port 2(ath0) entered disabled state
<6>[  303.090000] device vlan0 left promiscuous mode
<6>[  303.140000] device vlan0 entered promiscuous mode
<6>[  303.140000] br0: port 1(vlan0) entered forwarding state
<6>[  303.150000] br0: port 1(vlan0) entered forwarding state
<6>[  305.150000] br0: port 1(vlan0) entered forwarding state
<6>[  305.640000] cfg80211: Calling CRDA to update world regulatory domain
<6>[  305.650000] cfg80211: World regulatory domain updated:
<6>[  305.660000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[  305.660000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  305.670000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[  305.680000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[  305.690000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  305.700000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  305.720000] cfg80211: Calling CRDA for country: US
<6>[  305.730000] cfg80211: Regulatory domain changed to country: US
<6>[  305.730000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[  305.740000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[  305.750000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[  305.760000] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  305.760000] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  305.770000] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[  305.780000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[  305.790000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
<6>[  308.620000] device ath0 entered promiscuous mode
<6>[  308.620000] br0: port 2(ath0) entered forwarding state
<6>[  308.630000] br0: port 2(ath0) entered forwarding state
<4>[  308.750000] ag7100_ring_free Freeing at 0x81efc000
<4>[  308.750000] ag7100_ring_free Freeing at 0x81ce5000
<6>[  308.760000] br0: port 1(vlan0) entered disabled state
<4>[  308.790000] Writing 4
<6>[  308.790000] device eth0 left promiscuous mode
<6>[  308.790000] device eth0 entered promiscuous mode
<6>[  308.810000] br0: port 1(vlan0) entered forwarding state
<6>[  308.810000] br0: port 1(vlan0) entered forwarding state
<6>[  310.630000] br0: port 2(ath0) entered forwarding state
<6>[  310.810000] br0: port 1(vlan0) entered forwarding state
<6>[  316.810000] device vlan1 entered promiscuous mode
<6>[  316.840000] device vlan1 left promiscuous mode
<6>[  319.670000] IMQ driver unloaded successfully.
<6>[  320.730000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
<6>[  320.740000]    Hooking IMQ before NAT on PREROUTING.
<6>[  320.740000]    Hooking IMQ after NAT on POSTROUTING.
<3>[ 4035.860000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
<3>[ 4035.870000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<3>[ 4571.150000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4571.160000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
<3>[ 4571.170000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<3>[ 4571.420000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4572.130000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4572.610000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4572.860000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4573.100000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4573.340000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4573.590000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4574.070000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4574.310000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4574.560000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4575.030000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4575.280000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4575.520000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4575.770000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4576.250000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4576.490000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4577.200000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4577.450000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4578.160000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4578.400000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4578.650000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4578.890000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4579.140000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4579.610000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4580.790000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4581.270000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4581.510000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4581.760000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4582.010000] ath: phy0: Failed to stop TX DMA, queues=0x005!
<3>[ 4611.920000] ath: phy0: Failed to stop TX DMA, queues=0x001!
<3>[ 4877.390000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
<3>[ 4877.400000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<3>[ 5526.650000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5526.660000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
<3>[ 5526.670000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<3>[ 5526.910000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5527.160000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5527.400000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5527.650000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5527.890000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5528.130000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5528.380000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5528.860000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5529.570000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5529.810000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5530.290000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5530.770000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5531.010000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5531.720000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5532.200000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5532.440000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5532.690000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5532.940000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5533.650000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5533.890000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5534.370000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5534.610000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5534.860000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5535.330000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5535.580000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5535.820000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5536.070000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5536.330000] ath: phy0: Failed to stop TX DMA, queues=0x005!
<3>[ 5536.580000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 7246.000000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
<3>[ 7246.010000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<3>[ 8726.640000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8726.650000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
<3>[ 8726.660000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<3>[ 8726.900000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8727.400000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8727.650000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8728.360000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8728.600000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8728.850000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8729.320000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8729.800000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8730.050000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8730.520000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8730.770000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8731.010000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8731.260000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8731.740000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8731.980000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8732.690000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8732.940000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8733.180000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8733.430000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8734.140000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8734.610000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8735.320000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8735.800000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8736.050000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8736.520000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8736.770000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8737.010000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8737.490000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8737.740000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8738.210000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8738.460000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8738.700000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8738.950000] ath: phy0: Failed to stop TX DMA, queues=0x005!
Back to top View user's profile Send private message
buddee
DD-WRT Guru


Joined: 06 Feb 2010
Posts: 7401
Location: Little Rock
PostPosted: Sat Jul 27, 2013 18:32    Post subject: Reply with quote
Mile-Lile wrote:
On every hour I have wifi disconections... I cant see my SSID and I must restart router... I did 30/30/30 before upgrade, an I have default wireless settings.. here is my dmesg


This is known and a trac ticket as been made thereof.
_________________
Wireless N Config | Linking Routers | DD-WRT Wiki | DD-WRT Builds | Peacock - Broadcom FAQ

Having problems with port forwarding? Check out Port Forward Troubleshooting for more info.
Back to top View user's profile Send private message Visit poster's website
Goto page Previous  1, 2, 3, 4, 5 ... 15, 16, 17  Next Display posts from previous:    Page 4 of 17
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum