Mile-Lile DD-WRT Guru
Joined: 24 Feb 2013 Posts: 1634 Location: Belgrade
|
Posted: Sat Jul 27, 2013 18:05 Post subject: |
|
On every hour I have wifi disconections... I cant see my SSID and I must restart router... I did 30/30/30 before upgrade, an I have default wireless settings.. here is my dmesg
Code: | <6>[ 8.390000] cfg80211: Calling CRDA for country: US
<6>[ 8.400000] cfg80211: Regulatory domain changed to country: US
<6>[ 8.410000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 8.410000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[ 8.420000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[ 8.430000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 8.440000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 8.440000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 8.450000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[ 8.460000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
<6>[ 10.210000] device ath0 entered promiscuous mode
<6>[ 10.220000] br0: port 1(vlan0) entered forwarding state
<6>[ 10.220000] br0: port 2(ath0) entered forwarding state
<6>[ 10.230000] br0: port 2(ath0) entered forwarding state
<4>[ 11.060000] ag7100_ring_free Freeing at 0x81efc000
<4>[ 11.060000] ag7100_ring_free Freeing at 0x81ce5000
<6>[ 11.080000] br0: port 1(vlan0) entered disabled state
<4>[ 11.090000] Writing 4
<6>[ 11.100000] device eth0 left promiscuous mode
<6>[ 11.100000] device eth0 entered promiscuous mode
<6>[ 11.110000] br0: port 1(vlan0) entered forwarding state
<6>[ 11.120000] br0: port 1(vlan0) entered forwarding state
<6>[ 11.370000] device vlan1 entered promiscuous mode
<6>[ 11.410000] device vlan1 left promiscuous mode
<6>[ 12.230000] br0: port 2(ath0) entered forwarding state
<6>[ 13.120000] br0: port 1(vlan0) entered forwarding state
<6>[ 19.150000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
<6>[ 19.150000] Hooking IMQ before NAT on PREROUTING.
<6>[ 19.160000] Hooking IMQ after NAT on POSTROUTING.
<6>[ 20.980000] IMQ driver unloaded successfully.
<6>[ 22.820000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
<6>[ 22.830000] Hooking IMQ before NAT on PREROUTING.
<6>[ 22.830000] Hooking IMQ after NAT on POSTROUTING.
<3>[ 174.860000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
<3>[ 174.870000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<6>[ 195.230000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
<6>[ 261.320000] br0: port 1(vlan0) entered disabled state
<6>[ 261.340000] device ath0 left promiscuous mode
<6>[ 261.340000] br0: port 2(ath0) entered disabled state
<6>[ 263.990000] device vlan0 left promiscuous mode
<6>[ 264.040000] device vlan0 entered promiscuous mode
<6>[ 264.040000] br0: port 1(vlan0) entered forwarding state
<6>[ 264.050000] br0: port 1(vlan0) entered forwarding state
<6>[ 266.050000] br0: port 1(vlan0) entered forwarding state
<6>[ 266.540000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 266.550000] cfg80211: World regulatory domain updated:
<6>[ 266.560000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 266.560000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 266.570000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 266.580000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 266.590000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 266.600000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 266.620000] cfg80211: Calling CRDA for country: US
<6>[ 266.620000] cfg80211: Regulatory domain changed to country: US
<6>[ 266.630000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 266.630000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[ 266.640000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[ 266.650000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 266.660000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 266.670000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 266.670000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[ 266.680000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
<6>[ 269.530000] device ath0 entered promiscuous mode
<6>[ 269.530000] br0: port 2(ath0) entered forwarding state
<6>[ 269.540000] br0: port 2(ath0) entered forwarding state
<4>[ 269.660000] ag7100_ring_free Freeing at 0x81efc000
<4>[ 269.660000] ag7100_ring_free Freeing at 0x81ce5000
<6>[ 269.670000] br0: port 1(vlan0) entered disabled state
<4>[ 269.690000] Writing 4
<6>[ 269.690000] device eth0 left promiscuous mode
<6>[ 269.690000] device eth0 entered promiscuous mode
<6>[ 269.700000] br0: port 1(vlan0) entered forwarding state
<6>[ 269.700000] br0: port 1(vlan0) entered forwarding state
<6>[ 271.540000] br0: port 2(ath0) entered forwarding state
<6>[ 271.700000] br0: port 1(vlan0) entered forwarding state
<6>[ 275.670000] device vlan1 entered promiscuous mode
<6>[ 275.690000] device vlan1 left promiscuous mode
<6>[ 279.310000] IMQ driver unloaded successfully.
<6>[ 281.410000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
<6>[ 281.410000] Hooking IMQ before NAT on PREROUTING.
<6>[ 281.420000] Hooking IMQ after NAT on POSTROUTING.
<6>[ 300.420000] br0: port 1(vlan0) entered disabled state
<6>[ 300.440000] device ath0 left promiscuous mode
<6>[ 300.440000] br0: port 2(ath0) entered disabled state
<6>[ 303.090000] device vlan0 left promiscuous mode
<6>[ 303.140000] device vlan0 entered promiscuous mode
<6>[ 303.140000] br0: port 1(vlan0) entered forwarding state
<6>[ 303.150000] br0: port 1(vlan0) entered forwarding state
<6>[ 305.150000] br0: port 1(vlan0) entered forwarding state
<6>[ 305.640000] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 305.650000] cfg80211: World regulatory domain updated:
<6>[ 305.660000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 305.660000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 305.670000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 305.680000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
<6>[ 305.690000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 305.700000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 305.720000] cfg80211: Calling CRDA for country: US
<6>[ 305.730000] cfg80211: Regulatory domain changed to country: US
<6>[ 305.730000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
<6>[ 305.740000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
<6>[ 305.750000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
<6>[ 305.760000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 305.760000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 305.770000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
<6>[ 305.780000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
<6>[ 305.790000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
<6>[ 308.620000] device ath0 entered promiscuous mode
<6>[ 308.620000] br0: port 2(ath0) entered forwarding state
<6>[ 308.630000] br0: port 2(ath0) entered forwarding state
<4>[ 308.750000] ag7100_ring_free Freeing at 0x81efc000
<4>[ 308.750000] ag7100_ring_free Freeing at 0x81ce5000
<6>[ 308.760000] br0: port 1(vlan0) entered disabled state
<4>[ 308.790000] Writing 4
<6>[ 308.790000] device eth0 left promiscuous mode
<6>[ 308.790000] device eth0 entered promiscuous mode
<6>[ 308.810000] br0: port 1(vlan0) entered forwarding state
<6>[ 308.810000] br0: port 1(vlan0) entered forwarding state
<6>[ 310.630000] br0: port 2(ath0) entered forwarding state
<6>[ 310.810000] br0: port 1(vlan0) entered forwarding state
<6>[ 316.810000] device vlan1 entered promiscuous mode
<6>[ 316.840000] device vlan1 left promiscuous mode
<6>[ 319.670000] IMQ driver unloaded successfully.
<6>[ 320.730000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
<6>[ 320.740000] Hooking IMQ before NAT on PREROUTING.
<6>[ 320.740000] Hooking IMQ after NAT on POSTROUTING.
<3>[ 4035.860000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
<3>[ 4035.870000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<3>[ 4571.150000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4571.160000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
<3>[ 4571.170000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<3>[ 4571.420000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4572.130000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4572.610000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4572.860000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4573.100000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4573.340000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4573.590000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4574.070000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4574.310000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4574.560000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4575.030000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4575.280000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4575.520000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4575.770000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4576.250000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4576.490000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4577.200000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4577.450000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4578.160000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4578.400000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4578.650000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4578.890000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4579.140000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4579.610000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4580.790000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4581.270000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4581.510000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4581.760000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 4582.010000] ath: phy0: Failed to stop TX DMA, queues=0x005!
<3>[ 4611.920000] ath: phy0: Failed to stop TX DMA, queues=0x001!
<3>[ 4877.390000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
<3>[ 4877.400000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<3>[ 5526.650000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5526.660000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
<3>[ 5526.670000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<3>[ 5526.910000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5527.160000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5527.400000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5527.650000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5527.890000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5528.130000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5528.380000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5528.860000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5529.570000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5529.810000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5530.290000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5530.770000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5531.010000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5531.720000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5532.200000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5532.440000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5532.690000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5532.940000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5533.650000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5533.890000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5534.370000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5534.610000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5534.860000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5535.330000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5535.580000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5535.820000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5536.070000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 5536.330000] ath: phy0: Failed to stop TX DMA, queues=0x005!
<3>[ 5536.580000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 7246.000000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000286c0
<3>[ 7246.010000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<3>[ 8726.640000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8726.650000] ath: phy0: DMA failed to stop in 10 ms AR_CR=0x00000024 AR_DIAG_SW=0x42000020 DMADBG_7=0x000084c0
<3>[ 8726.660000] ath: phy0: Could not stop RX, we could be confusing the DMA engine when we start RX up
<3>[ 8726.900000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8727.400000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8727.650000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8728.360000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8728.600000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8728.850000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8729.320000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8729.800000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8730.050000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8730.520000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8730.770000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8731.010000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8731.260000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8731.740000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8731.980000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8732.690000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8732.940000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8733.180000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8733.430000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8734.140000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8734.610000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8735.320000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8735.800000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8736.050000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8736.520000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8736.770000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8737.010000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8737.490000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8737.740000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8738.210000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8738.460000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8738.700000] ath: phy0: Failed to stop TX DMA, queues=0x004!
<3>[ 8738.950000] ath: phy0: Failed to stop TX DMA, queues=0x005! |
|
|