New build is out 22118 (BS) K2.6 and K3.X

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4, 5, 6, 7, 8  Next
Author Message
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Wed Jul 24, 2013 13:39    Post subject: New build is out 22118 (BS) K2.6 and K3.X Reply with quote
ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2013/07-24-2013-r22118/

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build. (eg: 22118_NEWD-2_K2.6_mega-nv64k.bin). Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
[I prefer answere in whole sentence]
Sponsor
madman999
DD-WRT Guru


Joined: 11 Jun 2012
Posts: 1042

PostPosted: Wed Jul 24, 2013 20:29    Post subject: Reply with quote
Asus RT-N16-tried loading both 2.6 and 3.x versions of 22118 Mega and Big as an upgrade from 2.6 21676.

2.6-successfully loaded but wifi was non functional. the 2.4 ghz LED indicator was not lit and scanning for a signal showed that the SSID wasn;t broadcasting. Happened in rt-n16 mini.trx and mega version. So back to 21676.

3.x-flashing this firmware from webui caused my router to soft brick. Indication was power and Lan LEDs lit but wifi light not. pinging to 192.168.1.1 revealed intermittent responses in groups of 3-1 long response of about 2000 ms followed by 2 short responses of 3 ms. Then periods of no responses. Looks like maybe it was in a boot loop.

What I tried-all failed
upgrading from Asus Firmware to 3.x RT-N16 Mega and Big TRX file
upgrading from 2.6 21676 Mega 3.x RT-N16 Mega and Big TRX file and Bin files with reset and no reset of default settings.
Using Asus Rescue Mode to load 3.x RT-N16 Mega and Big TRX file and Bin files
Pretty much the same issue as what I had trying to use 3.x version of 21676.

Was able to recover back to working firmware using rescue mode.

has anyone successfully gotten a 3.x version to work on an Asus RT-N16?

_________________
Please state what make and model router plus the build number and type of DD-WRT you are using. Screen prints and a network diagram can are also helpful. Before you create a new post, use the search function. Chances are your issue has happened to someone else.

Common F.A.Q.
Where can I get the latest test Firmware or older ones?
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/

Asus RT-AC66R on 3.x 28072 Giga
TP-Link Archer C9 on 3.x r54095
NiTrus
DD-WRT User


Joined: 25 Dec 2010
Posts: 295
Location: Twin Cities, MN

PostPosted: Wed Jul 24, 2013 21:58    Post subject: Reply with quote
Router : Netgear WNDR3700v3
ISP : Comcast
Upgrade: 21676 ---> dd-wrt.v24-22118_NEWD-2_K3.x_mega.bin
Status : Successful web upgrade

(No 30/30/30 reset)
stalonge
DD-WRT Guru


Joined: 21 Jul 2006
Posts: 1898
Location: Fortaleza Ce Brazil

PostPosted: Wed Jul 24, 2013 22:37    Post subject: Reply with quote
E 3000 working fine with mega Kernel 3.10 22118

Samba OK
FTP OK
PPPoe OK

A litle mistake in USB page ... Showing evrything twice


Thanks devs

Very Happy Very Happy

_________________
DDwrt ...it rocks ....

1 R7800 54420 AP Wireguard webserver JFFS SAMBA FTP usb HD Mesh
1 R7800 54420 Cli Mesh
1 WZR1750 54389 AP Webserver Samba Wireguard
1 TP link Archer C7v5 54420 Cli Mesh
1 DD x86_64 48296 Gateway Samba Ftp Webserver
Mazout360
DD-WRT Novice


Joined: 21 Apr 2013
Posts: 21

PostPosted: Thu Jul 25, 2013 0:37    Post subject: Reply with quote
madman999 wrote:

has anyone successfully gotten a 3.x version to work on an Asus RT-N16?


21535 with linux 3.9.1 works fine here on my RT-N16. Still a no go for 21676 though (tried it several times with 30/30/30 reset and it soft bricks, couldn't get a debug log though). I wonder what went wrong between those two revisions...
jesbo
DD-WRT User


Joined: 16 Feb 2010
Posts: 152
Location: Virginia

PostPosted: Thu Jul 25, 2013 2:35    Post subject: Successful Flash Upgrade Reply with quote
Router : ASUS RT-N66U
ISP : Cox
Upgrade: 21676 ---> dd-wrt.v24-22118_NEWD-2_K3.x-big-RT-N66U.trx
Status : Successful web upgrade

(No 30/30/30 reset)

_________________
Asus RT-N66U / DD-WRT v24-sp2 (Build 23598)
chrootz
DD-WRT Novice


Joined: 06 May 2010
Posts: 12

PostPosted: Thu Jul 25, 2013 10:04    Post subject: Reply with quote
Router : Netgear WNDR4000
ISP : Comcast
Upgrade: 21676 ---> dd-wrt.v24-22118_NEWD-2_K3.x_mega.bin
Status : Successful web upgrade

(No 30/30/30 reset)


QoS bandwidth works like champ!
USB Storage runs OK
Everything runs OK and Still more testing.
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1378
Location: Germany

PostPosted: Thu Jul 25, 2013 13:29    Post subject: Reply with quote
Router : RT-N66U
ISP : DT Telekom
Upgrade: 21676 ---> dd-wrt.v24-22118_NEWD-2_K3.x_big.bin
Status : Successful web upgrade

_________________
RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
ninj0r
DD-WRT Novice


Joined: 07 Jul 2008
Posts: 4

PostPosted: Thu Jul 25, 2013 14:19    Post subject: Reply with quote
Router : RT-N66U
ISP : Time Warner
Upgrade: dd-wrt.v24-21676_NEWD-2_K3.x-big-RT-N66U --> dd-wrt.v24-22118_NEWD-2_K3.x-big-RT-N66U
Status : Successful web upgrade
adri
DD-WRT User


Joined: 07 Oct 2010
Posts: 85

PostPosted: Thu Jul 25, 2013 19:03    Post subject: Wrt320n no 5 Ghz 801.11an wireless Reply with quote
I upgraded my wrt320n from dd-wrt.v24-21676_NEWD-2_K2.6_std_nokaid_small.bin to dd-wrt.v24-22118_NEWD-2_K2.6_std_nokaid_small.bin using webflash, no reset.

The wrt320n was configured as a client bridge using 80211.an and working fine.
After the upgrade, the wrt320n fails to connect to the AP.
After a reboot, the wireless light comes on very briefly and then never illuminates or flickers again.

Reflashing back to 21676 made it work instantly again without any reconfiguration.
HoHoWan
DD-WRT Novice


Joined: 26 Jan 2013
Posts: 11

PostPosted: Thu Jul 25, 2013 21:18    Post subject: Reply with quote
Router : RT-AC66U
ISP : Comcast
Upgrade: Build 21676 --> dd-wrt-22118-Asus_RT-AC66U.trx
Status : Successful web upgrade
gamers1233
DD-WRT Novice


Joined: 26 Mar 2013
Posts: 24

PostPosted: Fri Jul 26, 2013 1:52    Post subject: Reply with quote
Router : Linksys E1000 v2
Upgrade: dd-wrt.v24-22118_NEWD-2_K2.6_mini_e1000v2.bin
Status : unsuccessful web upgrade

Flashed and got a upgrade complete message and the router is now on a endless reboot cycle. Tried a 30/30/30 reset, was no help.
jrscs
DD-WRT User


Joined: 09 Aug 2010
Posts: 413

PostPosted: Fri Jul 26, 2013 2:16    Post subject: Reply with quote
ASUS RT-AC66U upgraded version 21676 to version 22118

RT-AC66U - primary router/gateway
2.4Ghz (NG-mixed) with 20Mhz channel width => OK
5Ghz (N) with 40Mhz channel width => OK
SSH => OK
Telnet => OK
Port Forward => OK
WOL over the Internet => OK
USB storage mount to JFFS => No, Not Able To Mount (Will mount to default mnt)
PPTP server => Ok
Wiviz 2.4Ghz & 5Ghz => Ok

[Edit - Added Later]

Upgraded (dd-wrt.v24-21676_NEWD-2_K2.6_std_usb_nas-nv60k.bin)
to (dd-wrt.v24-22118_NEWD-2_K2.6_big-nv60k.bin)


e4200 - primary router/gateway
2.4Ghz (NG-mixed) with 20Mhz channel width => OK
5Ghz (N) with 40Mhz channel width => OK
SSH => OK
Telnet => OK
Port Forward => OK
WOL over the Internet => OK
PPTP server => Ok

e2000 - hard wired from rt-ac66u
5Ghz (N) with 40Mhz channel width => No

e3000 – Repeater Bridge on 5 Ghz (N) with 40Mhz channel width to e2000
2.4 (NG-mixed) with 20Mhz channel width => OK
5Ghz (N) with 40Mhz channel width => No

rt-ac66u--------e2000--> repeater bridge <--e3000

Because of e2000 and e3000 5 Ghz issue rolled them back to 21676

_________________
Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp


Last edited by jrscs on Fri Jul 26, 2013 15:35; edited 1 time in total
ipha
DD-WRT Novice


Joined: 15 Jul 2010
Posts: 9

PostPosted: Fri Jul 26, 2013 3:34    Post subject: Reply with quote
WNR3500Lv1 K3X images are still too big.
nyrang3rs
DD-WRT Novice


Joined: 07 May 2013
Posts: 31

PostPosted: Fri Jul 26, 2013 5:30    Post subject: Reply with quote
Running on an E3000, last build version had lots of download slowdown and other problems. This one is great so far! Thanks!!
Goto page 1, 2, 3, 4, 5, 6, 7, 8  Next Display posts from previous:    Page 1 of 8
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum