dd-wrt On a WR941ND V5.0

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2, 3, 4 ... 16, 17, 18  Next
Author Message
sgum
DD-WRT Novice


Joined: 20 Jun 2013
Posts: 9

PostPosted: Wed Jul 03, 2013 14:06    Post subject: Reply with quote
LOM wrote:
sgum wrote:


Please share the dd-wrt webflash bin file also since there is no files in router database for wr841ndV8. Thanks.

please help the link u ve shared for factory bin works but I m not sure which dd-wrt webflash bin you are talking about we should update on top of factory bin. Because in router database WR841NDv8 has no files no webflash no factory bin. Are you talking about we should use the webflash bin in WR941NDv5 on top of WR841NDv8 factory bin u've shared. I dont wanna brick the router. Please enlighten us. Thanks.


You don't need any webflash bin right now, the factory bin is r21676 which currently is the latest released dd-wrt firmware version.
You will need a webflash bin in the future when new dd-wrt firmware is released - use the webflash for 841NDv8 if there is no release for 941NDv5.

The router database is worked on and the recommended build for 841NDv8 is not yet there, it should however not be too difficult for you to read the forum and find new build advertisement threads with link to the build..

Please paste the output from dmesg directly after rooter reboot - it contains important info for the developers and may speed up the official dd-wrt support for the 941NDv5.


Thanks can I restore it back somehow to factory bin WR841NDv8 because I ve patched the WR941NDv5 webflash bin on top of factory bin WR841NDv8 file. I thought we needed the webflash so I bricked it I guess. Is there a way to unbrick WR941NDv5. Thanks.
Sponsor
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7647

PostPosted: Wed Jul 03, 2013 14:13    Post subject: Reply with quote
Sigh..
You used the webflash bin for the "old" v5 on a "new" v5 which has different hardware, this makes a perfect brick.
You can only debrick it by using a serial connection to the routers internal 3.3V TTL serial port.

_________________
Kernel panic: Aiee, killing interrupt handler!
cable007
DD-WRT Novice


Joined: 07 Oct 2012
Posts: 6

PostPosted: Thu Jul 04, 2013 17:33    Post subject: Reply with quote
Just wanted to report. I just flashed the file LOM provided here and it boots to DDWRT!!!

Thank you LOM!!!!!!!

Haven't tested everything yet, but I suspect everything will work with the exception of the third antenna.

So, just to make sure, until we hear of a specific new WR941ND v5 build released, we need to use WR841NDv8 builds from now until then?

Again, thanks!!! Very Happy
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7647

PostPosted: Fri Jul 05, 2013 7:37    Post subject: Reply with quote
cable007 wrote:
Just wanted to report. I just flashed the file LOM provided here and it boots to DDWRT!!!

Thank you LOM!!!!!!!

Haven't tested everything yet, but I suspect everything will work with the exception of the third antenna.

So, just to make sure, until we hear of a specific new WR941ND v5 build released, we need to use WR841NDv8 builds from now until then?

Again, thanks!!! Very Happy


Yes, your WR941NDv5 is now software wise a WR841NDv8 so use the WR841NDv8 webflash file for updates until the time when the new WR941NDv5 is officially supported.

Can you give me the dmesg output directly after rebooting the router?

_________________
Kernel panic: Aiee, killing interrupt handler!
cable007
DD-WRT Novice


Joined: 07 Oct 2012
Posts: 6

PostPosted: Sat Jul 06, 2013 13:21    Post subject: Reply with quote
LOM

Here is my dmesg, after rebooting router using management page and going to the web interface and using dmesg in the commands area. Don't know if that captures everything, but this is all that came up in the results box after running it.

My router does not have pins soldered in for the serial header, so this is the only way I can run dmesg for you right now...

Going to attach the log here as a txt file. By the way, had to use Safari to get it to give me results, Google Chrome would not load the results page.

Hope it helps!

I plan to test using the router later today as a repeater for another wifi network. If that works, will post back and let you know.
cable007
DD-WRT Novice


Joined: 07 Oct 2012
Posts: 6

PostPosted: Mon Jul 08, 2013 2:16    Post subject: Reply with quote
Another update...

The router I flashed with LOM's version of the firmware on this topic is working well enough to act as a wireless repeater, connecting in client mode to an unencrypted wifi connection and then broadcasting another network that phones and laptops are connecting to both wired and wireless.

So, in other words, good job LOM!

This is what I had gotten the router for, and it's working just fine. I didn't see any options for antenna 3, but didn't expect any since the WR841ND v8 doesn't have a third antenna.

I have the router off-site, so, I won't be able to test unless something goes wrong with it.

Again, thanks!
abcanw
DD-WRT Novice


Joined: 08 Jul 2013
Posts: 3

PostPosted: Mon Jul 08, 2013 18:00    Post subject: Reply with quote
thank you LOM , it worked very well except for TX power ...
when i change it , it only changes in the box but it doesnt really change , it stays the same ...

is there a way around it ?
panos_k75
DD-WRT Novice


Joined: 22 Jun 2013
Posts: 8

PostPosted: Mon Jul 08, 2013 21:51    Post subject: Reply with quote
I have loaded this version too with no issues - many thanks for this

Wireless Client mode works fine
however pptp client doesn't seem to work properly...Behaviour seems very erratic...Sometimes client connects sometimes it doesn't. Tried to also force the date with no real affect.

Are there any know client pp2p issues with this version?
simenes
DD-WRT Novice


Joined: 09 Jul 2013
Posts: 1

PostPosted: Tue Jul 09, 2013 13:18    Post subject: Reply with quote
i've tested too and it works very well =)
tks a lot
nostromox
DD-WRT Novice


Joined: 16 Jun 2006
Posts: 21

PostPosted: Tue Jul 09, 2013 15:23    Post subject: Reply with quote
But no way to get the 3rd antenna to Work?
Waiting for final release Smile
chetan1989
DD-WRT Novice


Joined: 11 Jul 2013
Posts: 1

PostPosted: Thu Jul 11, 2013 4:26    Post subject: Can I install once dd-wrt is installed? Reply with quote
Hey guys I was just wondering if I will be able to install gargoyle on the router once I have installed DD-WRT using the steps given in this thread ?
abcanw
DD-WRT Novice


Joined: 08 Jul 2013
Posts: 3

PostPosted: Sun Jul 14, 2013 5:39    Post subject: revert to stock firmware Reply with quote
LOM , can u tell me how to revert back to stock tp link firmware
LOM
DD-WRT Guru


Joined: 28 Dec 2008
Posts: 7647

PostPosted: Sun Jul 14, 2013 7:34    Post subject: Re: revert to stock firmware Reply with quote
abcanw wrote:
LOM , can u tell me how to revert back to stock tp link firmware


http://www.dd-wrt.com/phpBB2/viewtopic.php?p=765314#765314

_________________
Kernel panic: Aiee, killing interrupt handler!
sgum
DD-WRT Novice


Joined: 20 Jun 2013
Posts: 9

PostPosted: Mon Jul 15, 2013 23:40    Post subject: Reply with quote
Thanks LOM. It works very well. Also in order to disable lan ports

nvram set vlan0ports="5*"
nvram commit

it used to work but not with this build. Is there any other way arround. Thanks.
CoRePuLsE
DD-WRT Novice


Joined: 31 May 2013
Posts: 10

PostPosted: Thu Jul 25, 2013 7:58    Post subject: Reply with quote
went and installed it yesterday, it's working like a charm for me Very Happy !
Goto page Previous  1, 2, 3, 4 ... 16, 17, 18  Next Display posts from previous:    Page 3 of 18
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum