Broadcom K3.X testing, test users wanted

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3 ... 17, 18, 19 ... 56, 57, 58  Next
Author Message
garpinc
DD-WRT Novice


Joined: 03 Jun 2013
Posts: 8

PostPosted: Thu Jun 13, 2013 1:58    Post subject: Reply with quote
I need big version with ntfs support for e3000. Is it possible that you could post big as well in experimental dir for testing?
Sponsor
Mevunky
DD-WRT Novice


Joined: 06 May 2013
Posts: 24

PostPosted: Thu Jun 13, 2013 6:29    Post subject: Reply with quote
Thank you for the hard work!

WRT610n v2 finally got mine out and flashed this K3 21676 and its working a treat! Happy days as it also updated to nv64k Very Happy

Issues so far:

If you set N only for 5ghz you get A/N mixed mode instead no matter what. However N only is N only on the 2.4Ghz radio.

I cant get more than 65/70mbit even on wired, there is some kind of wall there, used to get 100mbit (my connection max) on K2.6 and K2.4 without issue. Tried with SPI firewall on and off/exactly the same results. I can get faster NAT routing on my v1 with a lot less CPU and v2.4.

WPS LED is always on too.

NAT forwards no working at all, anyone else with this. EDIT: Works now after a reboot.
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1378
Location: Germany

PostPosted: Thu Jun 13, 2013 8:09    Post subject: Reply with quote
€mev: of course there must be some AN mode, since A alone provides just 54 mbit/s like intel 3945 ABG card.
_________________
RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
Mevunky
DD-WRT Novice


Joined: 06 May 2013
Posts: 24

PostPosted: Thu Jun 13, 2013 8:28    Post subject: Reply with quote
BasCom wrote:
€mev: of course there must be some AN mode, since A alone provides just 54 mbit/s like intel 3945 ABG card.


Sorry I may have explained badly. I choose operating mode of 'N Only' however the radio is stuck in mixed mode offering AN not N only on the access point. Setting N only for the 2.4ghz radio removes the BG modes as expected.
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1378
Location: Germany

PostPosted: Thu Jun 13, 2013 8:40    Post subject: Reply with quote
of course it does. you can also say: N-Only is obsolete.

N-Only on 2,4 ghz offers wireless just for N devices not bg, as you say.

what do you expect N-Only does on an A radio? A stands for 5.ghz. you cant make the A radio working in 2,4 GHZ.

A radios can offer: A alone with 54mbps and AN with up to 450 mbps

_________________
RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
Mevunky
DD-WRT Novice


Joined: 06 May 2013
Posts: 24

PostPosted: Thu Jun 13, 2013 8:46    Post subject: Reply with quote
Odd... as a lot of other AP's I use (Xirrus etc) all provide N only on 5ghz and do not allow A mode clients to operate/connect on the 5ghz band. Is it pointless and obsolete? Maybe but then don't offer the option in the GUI. I understand the point you are making though.
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1378
Location: Germany

PostPosted: Thu Jun 13, 2013 8:53    Post subject: Reply with quote
ah ok i misunderstood. you want 5ghz client to connect, but not in slow mode 54mbps, just up to N.
i have no idea if this is supported generally. i have never seen a router operating in this mode. No DD-WRT device, nor other

what you want is:
Greenfield mode:

Quote:

Greenfield carries a similar meaning with modern wireless LAN networks. 802.11n Wi-Fi networks have an optional greenfield mode that improves efficiency by eliminating support for 802.11a/b/g devices


i think its not availible for broadcom/atheros yet in dd-wrt.

_________________
RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
Knasher
DD-WRT User


Joined: 07 Nov 2007
Posts: 449

PostPosted: Fri Jun 14, 2013 1:31    Post subject: Reply with quote
I tried flashing it onto my wrt610n v1, but unfortunately it wouldn't boot. Here is a boot log from serial if it is any use.

Code:

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Wed Jun 25 19:11:21 CST 2008 (ljh@team2-complier)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing PCI. [normal]
PCI bus 0 slot 0/0: vendor 0x14e4 product 0x0800 (flash memory, rev 0x02)
PCI bus 0 slot 1/0: vendor 0x14e4 product 0x471f (ethernet network, rev 0x02)
PCI bus 0 slot 2/0: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x10, rev 0x02)
PCI bus 0 slot 2/1: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x20, rev 0x02)
PCI bus 0 slot 3/0: vendor 0x14e4 product 0x471b (USB serial bus, rev 0x02)
PCI bus 0 slot 4/0: vendor 0x14e4 product 0x0804 (PCI bridge, rev 0x02)
PCI bus 0 slot 5/0: vendor 0x14e4 product 0x0816 (MIPS processor, rev 0x02)
PCI bus 0 slot 6/0: vendor 0x14e4 product 0x471d (IDE mass storage, rev 0x02)
PCI bus 0 slot 7/0: vendor 0x14e4 product 0x4718 (network/computing crypto, rev 0x02)
PCI bus 0 slot 8/0: vendor 0x14e4 product 0x080f (RAM memory, rev 0x02)
PCI bus 0 slot 9/0: vendor 0x14e4 product 0x471e (class 0xfe, subclass 0x00, rev 0x02)
Initializing Devices.

No DPN
This is a Parallel Flash
Boot partition size = 262144(0x40000)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 0004001B  (28)
os      #02   0004001C -> 007F7FFF  (8093668)
nvram   #03   007F8000 -> 007FFFFF  (32768)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 007F7FFF  (8093696)
nvram   #02   007F8000 -> 007FFFFF  (32768)
PCI bus 0 slot 1/0: pci_map_mem: attempt to map 64-bit region tag=0x800 @ addr=18010004
PCI bus 0 slot 1/0: pci_map_mem: addr=0x18010004 pa=0x18010000
ge0: BCM5750 Ethernet at 0x18010000
CPU type 0x2901A: 300MHz
Total memory: 65536 KBytes

Total memory used by CFE:  0x80700000 - 0x807A60E0 (680160)
Initialized Data:          0x8073A2E0 - 0x8073E570 (17040)
BSS Area:                  0x8073E570 - 0x807400E0 (7024)
Local Heap:                0x807400E0 - 0x807A40E0 (409600)
Stack Area:                0x807A40E0 - 0x807A60E0 (8192)
Text (code) segment:       0x80700000 - 0x8073A2E0 (238304)
Boot area (physical):      0x007A7000 - 0x007E7000
Relocation Factor:         I:00000000 - D:00000000

Boot version: v4.2
The boot is CFE

mac_init(): Find mac [00:25:9C:13:E1:0A] in location 1
Nothing...
country_init(): Find country code in location 0
The country is same
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
eth0: Link speed: 1000BaseT FDX
Device eth0:  hwaddr 00-25-9C-13-E1-0A, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
  Len:     0x778000     (7831552)       (0xBC040000)
  Offset0: 0x1C         (28)            (0xBC04001C)
  Offset1: 0x930        (2352)  (0xBC040930)
  Offset2: 0x1DC800     (1951744)       (0xBC21C800)
  Header CRC:    0x4AF5C238
  Calculate CRC: 0x4AF5C238
Image 1 is OK
Try to load image 1.
CMD: [load -raw -addr=0x807a60e0 -max=0x3a0000 :]
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: Failed.
Could not load :: Timeout occured
CMD: [boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:]
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3708 bytes read
Entry at 0x80001000
Closing network.
eth0: cannot clear 1400/00000002
Starting program at 0x80001000

It just sits there after that and doesn't proceed any further.
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1378
Location: Germany

PostPosted: Fri Jun 14, 2013 10:19    Post subject: Reply with quote
since wrt610n needed K2.4 i am not sure if it is k3.0 capable.
_________________
RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
Knasher
DD-WRT User


Joined: 07 Nov 2007
Posts: 449

PostPosted: Fri Jun 14, 2013 10:26    Post subject: Reply with quote
BasCom wrote:
since wrt610n needed K2.4 i am not sure if it is k3.0 capable.

I've never had any trouble running K2.6 on it.
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1378
Location: Germany

PostPosted: Fri Jun 14, 2013 12:02    Post subject: Reply with quote
sure? there is no dd-wrt image k2,6 for wrt610n v1

edit: ok you´re right.

_________________
RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
Knasher
DD-WRT User


Joined: 07 Nov 2007
Posts: 449

PostPosted: Fri Jun 14, 2013 12:08    Post subject: Reply with quote
BasCom wrote:
sure? there is no dd-wrt image k2,6 for wrt610n v1

There isn't a dedicated build but I've always just flashed the generic broadcom ones, which boot correctly. I'm running dd-wrt.v24-21676_NEWD-2_K2.6_mega.bin on it at the moment.
iVitor
DD-WRT User


Joined: 10 Jul 2009
Posts: 105

PostPosted: Sat Jun 15, 2013 23:16    Post subject: Reply with quote
Tested the latest 21676 on my E3000, the router is nice and stable... up until the point I enable QoS.

Couldn't manage any QoS configuration in which the router didn't keep rebooting, which is a total deal breaker for me.

It has got plenty of potential and must have taken lots work put into it (which I don't want to go unnoticed).
Will change to k2.6 in the morning just to get a reference of QoS is in there (was using Tomato for the tc-atm patch).
ahbecan
DD-WRT Novice


Joined: 29 Jul 2009
Posts: 14

PostPosted: Thu Jun 20, 2013 23:14    Post subject: Reply with quote
Hi, I saved this way.

1 - Run tftp and choose wrt610n.bin from tftp. (mini usb)
2 - Hook Serial port .
3 - Run Putty (COM?-115200-8-1-NONE-NONE)
4 - Power on router.
5 - Press ctrl-c when it's booting.
6 - When you see CFE> write code.bin and press enter.
7 - Then press upgrade button from tftp.
7 - See "installation complete and successful"
8 - Wait 2min for booting.(Or reset manual after 2min)
9 - And hard reset (30-30-30)
10 - Router is recovered. Can go into the settings.



Knasher wrote:
I tried flashing it onto my wrt610n v1, but unfortunately it wouldn't boot. Here is a boot log from serial if it is any use.

Code:

CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Wed Jun 25 19:11:21 CST 2008 (ljh@team2-complier)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing PCI. [normal]
PCI bus 0 slot 0/0: vendor 0x14e4 product 0x0800 (flash memory, rev 0x02)
PCI bus 0 slot 1/0: vendor 0x14e4 product 0x471f (ethernet network, rev 0x02)
PCI bus 0 slot 2/0: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x10, rev 0x02)
PCI bus 0 slot 2/1: vendor 0x14e4 product 0x471a (USB serial bus, interface 0x20, rev 0x02)
PCI bus 0 slot 3/0: vendor 0x14e4 product 0x471b (USB serial bus, rev 0x02)
PCI bus 0 slot 4/0: vendor 0x14e4 product 0x0804 (PCI bridge, rev 0x02)
PCI bus 0 slot 5/0: vendor 0x14e4 product 0x0816 (MIPS processor, rev 0x02)
PCI bus 0 slot 6/0: vendor 0x14e4 product 0x471d (IDE mass storage, rev 0x02)
PCI bus 0 slot 7/0: vendor 0x14e4 product 0x4718 (network/computing crypto, rev 0x02)
PCI bus 0 slot 8/0: vendor 0x14e4 product 0x080f (RAM memory, rev 0x02)
PCI bus 0 slot 9/0: vendor 0x14e4 product 0x471e (class 0xfe, subclass 0x00, rev 0x02)
Initializing Devices.

No DPN
This is a Parallel Flash
Boot partition size = 262144(0x40000)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 0004001B  (28)
os      #02   0004001C -> 007F7FFF  (8093668)
nvram   #03   007F8000 -> 007FFFFF  (32768)
Partition information:
boot    #00   00000000 -> 0003FFFF  (262144)
trx     #01   00040000 -> 007F7FFF  (8093696)
nvram   #02   007F8000 -> 007FFFFF  (32768)
PCI bus 0 slot 1/0: pci_map_mem: attempt to map 64-bit region tag=0x800 @ addr=18010004
PCI bus 0 slot 1/0: pci_map_mem: addr=0x18010004 pa=0x18010000
ge0: BCM5750 Ethernet at 0x18010000
CPU type 0x2901A: 300MHz
Total memory: 65536 KBytes

Total memory used by CFE:  0x80700000 - 0x807A60E0 (680160)
Initialized Data:          0x8073A2E0 - 0x8073E570 (17040)
BSS Area:                  0x8073E570 - 0x807400E0 (7024)
Local Heap:                0x807400E0 - 0x807A40E0 (409600)
Stack Area:                0x807A40E0 - 0x807A60E0 (8192)
Text (code) segment:       0x80700000 - 0x8073A2E0 (238304)
Boot area (physical):      0x007A7000 - 0x007E7000
Relocation Factor:         I:00000000 - D:00000000

Boot version: v4.2
The boot is CFE

mac_init(): Find mac [00:25:9C:13:E1:0A] in location 1
Nothing...
country_init(): Find country code in location 0
The country is same
CMD: [ifconfig eth0 -addr=192.168.1.1 -mask=255.255.255.0]
eth0: Link speed: 1000BaseT FDX
Device eth0:  hwaddr 00-25-9C-13-E1-0A, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
CMD: [go;]
Check CRC of image1
  Len:     0x778000     (7831552)       (0xBC040000)
  Offset0: 0x1C         (28)            (0xBC04001C)
  Offset1: 0x930        (2352)  (0xBC040930)
  Offset2: 0x1DC800     (1951744)       (0xBC21C800)
  Header CRC:    0x4AF5C238
  Calculate CRC: 0x4AF5C238
Image 1 is OK
Try to load image 1.
CMD: [load -raw -addr=0x807a60e0 -max=0x3a0000 :]
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: Failed.
Could not load :: Timeout occured
CMD: [boot -raw -z -addr=0x80001000 -max=0x3a0000 flash0.os:]
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3708 bytes read
Entry at 0x80001000
Closing network.
eth0: cannot clear 1400/00000002
Starting program at 0x80001000

It just sits there after that and doesn't proceed any further.

_________________
WRT610N v1 (14929_mega)
ahbecan
DD-WRT Novice


Joined: 29 Jul 2009
Posts: 14

PostPosted: Thu Jun 20, 2013 23:40    Post subject: Reply with quote
Hi, BrainSlayer

K3.x_r21676_mega doesn't work in wrt610n v1.

_________________
WRT610N v1 (14929_mega)
Goto page Previous  1, 2, 3 ... 17, 18, 19 ... 56, 57, 58  Next Display posts from previous:    Page 18 of 58
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum