Broadcom K3.X testing, test users wanted

Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3 ... 56, 57, 58  Next
Author Message
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Tue May 14, 2013 12:28    Post subject: Broadcom K3.X testing, test users wanted Reply with quote
these builds here will run on usually almost all K26 supported device with at lease 8 mb flash and 32 mb ram.
if you are able to handle recovery, please test. if not. dont touch it.

we tested Asus RT-N66U, Linksys E4200, Asus RT-N15, Netgear WNDR4000 so far.

as prerequirement it would be good if a K26 is already installed so i dont need to post many special images here for all the factory firmware format types.

on NV64 or NV60k devices consider that you dont need any special images anymore after upgrading. dd-wrt does now detect all nvram types (32K, 60K, 64K) and handles them well. so totally you will always have access to 64K nvram, even on 32K or 60K devices.

for first install you still need the special NV64 or NV60 file since there is a check embedded in the K26 firmwares. it has been removed in 3.X



dd-wrt.v24-21605_NEWD-2_K3.x_mega-nv64k.bin
 Description:
special file for NV64K based devices

Download
 Filename:  dd-wrt.v24-21605_NEWD-2_K3.x_mega-nv64k.bin
 Filesize:  7.29 MB
 Downloaded:  5591 Time(s)


dd-wrt.v24-21605_NEWD-2_K3.x_mega-nv60k.bin
 Description:
special file for NV60 based devices

Download
 Filename:  dd-wrt.v24-21605_NEWD-2_K3.x_mega-nv60k.bin
 Filesize:  7.29 MB
 Downloaded:  5030 Time(s)


dd-wrt.v24-21605_NEWD-2_K3.x_mega.bin
 Description:

Download
 Filename:  dd-wrt.v24-21605_NEWD-2_K3.x_mega.bin
 Filesize:  7.29 MB
 Downloaded:  5562 Time(s)


_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Sponsor
okaegi
DD-WRT Novice


Joined: 18 Mar 2012
Posts: 45

PostPosted: Tue May 14, 2013 13:03    Post subject: Reply with quote
I can test with a wndr4000 and a wndr4500 . Are both supported ?
Regards Oliver

_________________
WNDR3700v1 (Dhcp,Wlan-G,Openntpd) build 23802
WNDR3700v2 (Client Bridge, Sony DPF-HD1000) build 23802
WNDR4000 (Client Bridge, Camera) built 22118
WNDR4000 (Nas-only 1 TB, Synology Save Server) built 22118
WNDR4500v1 (Wlan-N) build 22118
WNDR4500V1 (Nas-only 2 TB) built 23802
R6300 (Wlan-AC) Netgear
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Tue May 14, 2013 13:06    Post subject: Reply with quote
I'd be happy to help test but I have no routers other than the ones you have tested. LOM has tested the rt-n16 I understand.

I would be happy to assist you if you want to look at the problem of any k24 build after the last working build of 19342 erasing / formatting SD cards when inserted and mmc support is enabled.

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=159383&postdays=0&postorder=asc&start=15

_________________
[Moderator Deleted] Shocked
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Tue May 14, 2013 13:12    Post subject: Reply with quote
okaegi wrote:
I can test with a wndr4000 and a wndr4500 . Are both supported ?
Regards Oliver


in theory all K26 devices are supported but not tested

the reason for this test is not to test already tested devices. we are interested in results on other k26 supported routers

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s


Last edited by BrainSlayer on Tue May 14, 2013 13:14; edited 1 time in total
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Tue May 14, 2013 13:13    Post subject: Reply with quote
barryware wrote:
I'd be happy to help test but I have no routers other than the ones you have tested. LOM has tested the rt-n16 I understand.

I would be happy to assist you if you want to look at the problem of any k24 build after the last working build of 19342 erasing / formatting SD cards when inserted and mmc support is enabled.

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=159383&postdays=0&postorder=asc&start=15


k24 works also with newer builds, but i cannot add that many new kernel related features to 2.4. i move on to migrate all to latest kernels

_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Tue May 14, 2013 13:25    Post subject: Reply with quote
BrainSlayer wrote:
barryware wrote:
I'd be happy to help test but I have no routers other than the ones you have tested. LOM has tested the rt-n16 I understand.

I would be happy to assist you if you want to look at the problem of any k24 build after the last working build of 19342 erasing / formatting SD cards when inserted and mmc support is enabled.

http://www.dd-wrt.com/phpBB2/viewtopic.php?t=159383&postdays=0&postorder=asc&start=15


k24 works also with newer builds, but i cannot add that many new kernel related features to 2.4. i move on to migrate all to latest kernels


Thanks for the response..

I'm not talking about adding features to k24 builds. I am talking about SD/MMC support is no longer working on any build past 19342. As I have posted on the forum in the build threads, as well as TRAC, any build past 19342 erases or formats the sd card when inserted and support is enabled in the gui.

It broke somewhere after 19342. 19519 was the first build posted after 19342 and that is when it broke.

I realize that the older legacy routers like the wrt54g-TM are out dated. However, the older routers are rock solid with strong radios with the ability to connect other antennas. For me (and a few others), they are still used.

_________________
[Moderator Deleted] Shocked
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Tue May 14, 2013 14:24    Post subject: Reply with quote
hard to test. i didnt mod my devices
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Tue May 14, 2013 14:34    Post subject: Reply with quote
BrainSlayer wrote:
hard to test. i didnt mod my devices

Maybe see what could have caused the problem between svn 19342 & svn 19519 (k24).

I'll be happy to test.

_________________
[Moderator Deleted] Shocked
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Tue May 14, 2013 14:35    Post subject: Reply with quote
fixes radio crashes on wndr3400 and belkin f7d4302


dd-wrt.v24-21605_NEWD-2_K3.x_mega-nv64k.bin
 Description:

Download
 Filename:  dd-wrt.v24-21605_NEWD-2_K3.x_mega-nv64k.bin
 Filesize:  7.29 MB
 Downloaded:  4730 Time(s)


dd-wrt.v24-21605_NEWD-2_K3.x_mega-nv60k.bin
 Description:

Download
 Filename:  dd-wrt.v24-21605_NEWD-2_K3.x_mega-nv60k.bin
 Filesize:  7.29 MB
 Downloaded:  4383 Time(s)


dd-wrt.v24-21605_NEWD-2_K3.x_mega.bin
 Description:

Download
 Filename:  dd-wrt.v24-21605_NEWD-2_K3.x_mega.bin
 Filesize:  7.29 MB
 Downloaded:  4550 Time(s)


_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1243

PostPosted: Tue May 14, 2013 14:48    Post subject: Reply with quote
Tested on E2500... good clean boot...
Wifi detected only 2.4ghz interface...

let me know if you would like dmesg, or serial boot log.

-Fractal

Uploaded at Picoodle.com

Uploaded at Picoodle.com
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7463
Location: Dresden, Germany

PostPosted: Tue May 14, 2013 14:54    Post subject: Reply with quote
if all is working fine. no need for Smile
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
Fractal
DD-WRT Guru


Joined: 19 Apr 2010
Posts: 1243

PostPosted: Tue May 14, 2013 14:56    Post subject: Reply with quote
BrainSlayer wrote:
if all is working fine. no need for Smile


no problem, its working, but the driver does not detect the 5ghz interface.... driver issue ?

I believe the 5ghz interface uses the WL_HIGH module
Wireless Radio = Broadcom BCM43236


-Fractal
barryware
DD-WRT Guru


Joined: 26 Jan 2008
Posts: 13049
Location: Behind The Reset Button

PostPosted: Tue May 14, 2013 15:08    Post subject: Reply with quote
Fractal wrote:
BrainSlayer wrote:
if all is working fine. no need for Smile


no problem, its working, but the driver does not detect the 5ghz interface.... driver issue ?

I believe the 5ghz interface uses the WL_HIGH module
Wireless Radio = Broadcom BCM43236


-Fractal


if you guys get 5ghz working on the 2500, it will prolly work on the 3200. I do have a 3200 I can help test with.

_________________
[Moderator Deleted] Shocked
Magnetron1.1
DD-WRT User


Joined: 21 Nov 2010
Posts: 278
Location: North America

PostPosted: Tue May 14, 2013 15:55    Post subject: Reply with quote
The 60K version loads and runs fine on the E3000 Linksys. WAN and LAN ports work. Both radios work. LEDs are correct. F/w detects all four partitions on my HP thumb drive and automounts the NTFS partition. JFFS works. Shows 64KB NVRAM. Samba and CIFS work. Overclocking/under clocking doesn't work for the same reason that you posted on another thread.

NFS (New Feature Suggestion)
1.) Auto insert the necessary kmods for all the detected disc partitions.
2.) If there is enough space left, include the blkid app in the firmware.



- Magnetron1.1


Last edited by Magnetron1.1 on Tue May 14, 2013 17:34; edited 2 times in total
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1378
Location: Germany

PostPosted: Tue May 14, 2013 16:14    Post subject: Reply with quote
BS: why are that files half that big, postet in RT-N66U Thread ? big and mega differ about 9 mb ?
_________________
RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
Goto page 1, 2, 3 ... 56, 57, 58  Next Display posts from previous:    Page 1 of 58
Post new topic   This topic is locked: you cannot edit posts or make replies.    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum