Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Fri Apr 12, 2013 11:14 Post subject:
Filesharing is working...It took me a while to figure it all out (no instructions from the Devs for getting it going...thanx guys)
Anyway....
Enable MiniDLNA and set up your share.
Then Setup the Share under Samba (but don't enable Samba...unless you plan to use it)
Then setup the user information and select what to share including ProFTP.
This worked for me and allowed me to Save and Apply.
EDIT - BTW....I haven't had a chance to test this build yet...I'm travelling...but the above worked on 21153 on my WZR-600DHP
redhawk _________________ The only stupid question....is the unasked one.
Filesharing is working...It took me a while to figure it all out (no instructions from the Devs for getting it going...thanx guys)
Anyway....
Enable MiniDLNA and set up your share.
Then Setup the Share under Samba (but don't enable Samba...unless you plan to use it)
Then setup the user information and select what to share including ProFTP.
This worked for me and allowed me to Save and Apply.
EDIT - BTW....I haven't had a chance to test this build yet...I'm travelling...but the above worked on 21153 on my WZR-600DHP
redhawk
errr...but I tried has you said still don't work, anyway we shouldn't need to enable DLNA Server or Samba Server if we just need ftp right
I enable ftp apply
add a share and apply
add a user a gives that error _________________ Buffalo WZR-HP-AG300H | TPLINK ARCHER-C7 v2
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Fri Apr 12, 2013 11:29 Post subject:
fingerslip wrote:
errr...but I tried has you said still don't work, anyway we shouldn't need to enable DLNA Server or Samba Server if we just need ftp right
I enable ftp apply
add a share and apply
add a user a gives that error
Here is my setup...and FTP is working for me now. I only use my unit as an FTP server.
I had to enable MiniDLNA or my mount points did not work correctly....one more thing...I do have this added to my startup script...adjust partitions accordingly.
sleep 10
umount /opt
mount -o noatime -t ext2 /dev/sda1 /opt
mount -o noatime -t ext2 /dev/sda3 /mnt
redhawk _________________ The only stupid question....is the unasked one.
Seems to work so far on the D-Link DIR-615 rev D3.
No detail testing done, just upgrade without reset. Router is only used as a second gateway to another network and an additional access point.
Joined: 04 Jan 2007 Posts: 11564 Location: Wherever the wind blows- North America
Posted: Fri Apr 12, 2013 20:33 Post subject:
fingerslip wrote:
in this build doing what you did Redhawk0 at least for me it doesn't work
Finally got home to test this build on the WZR-600DHP...you're correct...the above setup for ftp does NOT work on this unit. It is not mounting correctly.
I'm going back to 21153 where it does work.
The other thing noticed is that the 5GHz radio does not work at 40MHz channel width...but it does at 20MHz channel width. It will broadcast but you can't connect to it at 40MHz.
redhawk _________________ The only stupid question....is the unasked one.
the wireless in 2,4ghz is a bit messed up I get a lot of ups and downs in Tx and Rx rates _________________ Buffalo WZR-HP-AG300H | TPLINK ARCHER-C7 v2
