[Macgyver]

Testing on E3000 openvpn build....openVPN service fails to start using GUI still only using certs and UDP TUN mode...nothing showing in openVPN status page...how is this working on e4200 and not on e3000?

[netadair]

Hello Fractal,

I'm testing your build 20202 (mega) on RT-N16 and so far have the following results:

* 3G usb modems: usb_modeswitch fails to find any devices because it fails to read descriptors thus cannot change the usb stick's mode. I opened ticket 2736 on Trac descibing the dependecy on libusb for that but was told Trac is not for private builds.

* huwai modem init string: a ^ character in modem init string needs to be escaped by another ^ in netmode.comgt, otherwise it is translated

* FPU emulation: was switched off in kernel for bcm47xx, however I'm unable to find any precompiled optware with soft emulation in toolchain; this breaks a number of optware packages.
Maybe for a better transition an fpu-enabled build would be great (on mega?)

* any network topology change (also on WAN) makes my local network ssh session loose connection

* despite STP switched off, the bridge ports go through STP (no fast forwarding ?); maybe the reason for connection losses as well


Will continue testing...

netadair

[68rustang]

stupid question.

What build should I be using for my e4200v1?

One of the trailed *-e4200.bin builds or one of the *-nv60k.bin builds?

I thought once I went nv60 I had to stick with it but then again I though the e4200 only supported nv60 builds so what is the point of the *-e4200.bin builds?

[Malachi]

E4200 bin builds are for first time flashing.

[68rustang]

forgot about that, Thanks. Like I said, stupid question.

[basmaf]

[SteveJenkins]

Running this on two of my E4200s, with great results. Seems like the most stable build so far!

I have noticed, however, that when choosing "upper" or "lower" for the 40MHz channels, it actually ends up the opposite of what I expect. For example, if I choose Channel 11 and "upper" I see 11 + 7 on my signal scan. Isn't 7 lower than 11? Or am I misunderstanding how it's supposed to work?

[bondbond55]

File is no longer located in the directory. Does anyone have the file or a mirror?

[SteveJenkins]

I've got the E4200 trailed std and mega builds hosted locally here:

http://stevejenkins.com/blog/2013/01/my-cisco-linksys-e4200-dd-wrt-settings-for-max-speed/

The Barryware site (where Fractal builds have lived in the past) has been unreliable the last day or two, and I believe it's being taken down in favor of ftp://ftp.basmaf.com/

[blumman]

[Fractal]

testing new builds, with new toolchains that were released 3/22 -

Will post when I have new bins ect..

-Fractal

[cullons]

no found link ??