[mman1982]

Hi All!

I using DD-WRT:
DD-WRT v24-sp2 (01/24/13) std
(SVN revision 20548)

I set-up QOS, but it don't seems to working: when bittorrent downloading, i can't watch a youtube video without hickups, or can't use web browser. I tried to setup service, IP and MAC QOS. I look at /proc/net/ip_conntrack says me:
udp 17 7 src=84.52.151.13 dst=xx.xxx.101.55 sport=15602 dport=51413 packets
=1 bytes=131 src=192.168.1.110 dst=84.52.151.13 sport=51413 dport=15602 packets=
1 bytes=296 mark=218112 use=2
udp 17 29 src=192.168.1.107 dst=192.168.1.1 sport=51000 dport=53 packets=1
bytes=59 src=192.168.1.1 dst=192.168.1.107 sport=53 dport=51000 packets=1 bytes=
160 mark=228352 use=2

As it seems packet marked, but the DD-WRT wiki says:
" Exempt: 100
Premium: 10
Express: 20
Standard: 30
Bulk: 40
(no QoS matched): 0 "
How can i get a working QOS?
My router is Tp-Link WR-841ND 7.0

Thanks for help!

[Markus]

The mark looks correct. Show us your qos-config.

[mman1982]

[tcole102]

Firmware: DD-WRT v24-sp2 (07/24/13) std

udp 17 119 src=192.168.1.139 dst=xxx.234.68.13 sport=49174 dport=55586 packets=31 bytes=6200 src=216.234.68.13 dst=71.12.185.109 sport=55586 dport=49174 packets=25 bytes=5000 [ASSURED] mark=218112 use=2

Wiki says the mark should be 10 for premium and 20 for express. Ive tried both premium and express and the mark value does not change.

Thanks for any help.

[Mile-Lile]

20548 does't have ipp2p module... update to 22118...
do (from CLI) the:

[Mile-Lile]

try something like this and see if its works for you...