New build is out 20675 (BS)

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
kt_haddock
DD-WRT Guru


Joined: 25 Dec 2009
Posts: 710

PostPosted: Mon Feb 11, 2013 13:53    Post subject: New build is out 20675 (BS) Reply with quote
ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2013/02-11-2013-r20675/

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build. (eg: 20675_NEWD-2_K2.6_mega-nv64k.bin).Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless.
If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.

_________________
[I prefer answere in whole sentence]


Last edited by kt_haddock on Tue Feb 12, 2013 11:55; edited 2 times in total
Sponsor
ms22282
DD-WRT Novice


Joined: 01 Jun 2010
Posts: 46

PostPosted: Mon Feb 11, 2013 19:25    Post subject: Re: New build is out 20675 (BS) Reply with quote
Ok, found the problem with this build on rt-n16.
I'm not sure why my previous post got deleted, but Resetting to factory default makes the router unusable.
1. Flash to dd-wrt.v24-13297_NEWD-2_K2.6_mini.bin
Flash and reboot ok
2. Reset factory defaults
Reboot ok
3. Flash to dd-wrt.v24-20675_NEWD-2_K2.6_mega.bin
Flash and reboot ok
4. Reset factory defaults
reboot but no ssh, no web-gui, no ping
Obviously something's wrong with this build.
Can produce this faithfully every time.


kt_haddock wrote:
ftp://dd-wrt.com/others/eko/BrainSlayer-V24-preSP2/2013/02-11-2013-r20675/

This build thread is for reporting successes and problem with loading this experimental test build. This is important info for developers and users. Always state your hardware and SPECIFIC build. (eg: 20675_NEWD-2_K2.6_mega-nv64k.bin).Do not ask questions about your specific router or how to configure it in this thread; create your own thread to discuss any specific problems you have or need resolved. This thread is to report info, not to seek it. Posts that do not add to understanding this build will be deleted. Make sure you know how to flash properly and the risk before using this build. It is important to adhere to these requirements, to keep this thread from becoming impossibly long and useless. If you don't know what build to flash and how to flash properly and have a means of recovery if things should go wrong, do NOT flash this experimental test build.
Murrkf
DD-WRT Guru


Joined: 22 Sep 2008
Posts: 12675

PostPosted: Mon Feb 11, 2013 19:34    Post subject: Re: New build is out 20675 (BS) Reply with quote
ms22282 wrote:
reboot but no ssh, no web-gui, no ping


If you couldn't ping it, you would not have been able to flash it with the mini build either. So at this point it is unclear as to whether this is a build issue or a user issue. Your previous post was split, not deleted. Search for it.

_________________
SIG:
I'm trying to teach you to fish, not give you a fish. If you just want a fish, wait for a fisherman who hands them out. I'm more of a fishing instructor.
LOM: "If you show that you have not bothered to read the forum announcements or to follow the advices in them then the level of help available for you will drop substantially, also known as Murrkf's law.."
ms22282
DD-WRT Novice


Joined: 01 Jun 2010
Posts: 46

PostPosted: Mon Feb 11, 2013 19:40    Post subject: Re: New build is out 20675 (BS) Reply with quote
Yes, I had to power+wps for 30 seconds in order to get it to work then flash to mini.
If you have rt-n16 with this build, just go to web-gui - administration - factory default.
Then the router will reboot, and become unusable.
Only way you can get it back is power+wps for 30 seconds.
Murrkf wrote:
ms22282 wrote:
reboot but no ssh, no web-gui, no ping


If you couldn't ping it, you would not have been able to flash it with the mini build either. So at this point it is unclear as to whether this is a build issue or a user issue. Your previous post was split, not deleted. Search for it.
jrscs
DD-WRT User


Joined: 09 Aug 2010
Posts: 413

PostPosted: Tue Feb 12, 2013 13:19    Post subject: Reply with quote
Upgraded (dd-wrt.v24-205656_NEWD-2_K2.6_std_usb_nas-nv60k.bin) to (dd-wrt.v24-20675_NEWD-2_K2.6_std_usb_nas-nv60k.bin)

e4200 - primary router/gateway
2.4Ghz (NG-mixed) with 20Mhz channel width => OK
5Ghz (N) with 40Mhz channel width => OK
SSH => OK
WOL over the Internet => OK
USB storage mount to JFFS => OK
PPTP server => Ok
NoCatSplash => OK


e2000 - hard wired from e4200
5Ghz (N) with 40Mhz channel width => OK

e3000 – Repeater Bridge on 5 Ghz (N) with 40Mhz channel width to e2000
2.4 (NG-mixed) with 20Mhz channel width => OK
5Ghz (N) with 40Mhz channel width => OK

e4200--------e2000--> <--e3000

_________________
Netgear XR500, R7800
Asus AC87Ua1
Repeater Bridge
Netgear R6400v2otp
duncanidahoe
DD-WRT User


Joined: 29 Nov 2009
Posts: 354
Location: Dark Side of the Moon

PostPosted: Fri Feb 15, 2013 2:32    Post subject: E4200 Reply with quote
Upgraded to the 20675 mega build on my e4200 yesterday

the only problem encountered so far is that w/o doesn't

work on auto width when auto is assigned w/o doesn't

broadcast.

_________________
E4200 w/ mega build 23838

4 wrt160n v3 w/ BrainSlayer dd-wrt.v24-15778_NEWD-2_K2.6_std_nokaid_small.bin

2 wrt320n w/ BrainSlayer dd-wrt v24-15778 NEWD-2_K2.6_big.bin

wndr3300 w/ dd-wrt.v24-14583_NEWD_std-nokaid_nohotspot_nostor.bin

wrt54g v6 w/ Brainslayer 14594 dd-wrt.v24_micro_generic.bin

wrt400n w/ 21676 build
__________________________________

Peacock Thread | BrainSlayer Builds | Eko Builds
pizzulicchio
DD-WRT User


Joined: 16 Dec 2009
Posts: 83
Location: Florence (ITALY)

PostPosted: Sat Feb 16, 2013 0:48    Post subject: Linksys WRT 610N v2 and 02-11-2013-r20675 build Reply with quote
My wrt 610N v2 seems to not be able to update to the latest dd-wrt.v24-20675_NEWD-2_K2.6_mega.bin or dd-wrt.v24-20675_NEWD-2_K2.6_big.bin

Upgrade fail from web.

I have a serial connection soldered to mainboard of the router and upgrading from CFE the update stop with this alert:

Image too big for partition: linux


Will be no more supported this router in future versions?
_Robb_
DD-WRT User


Joined: 14 Jan 2012
Posts: 324
Location: Wr PL

PostPosted: Sat Feb 16, 2013 14:11    Post subject: Wifi unstable Reply with quote
dd-wrt.v24-20675_NEWD-2_K2.6_big-nv60k.bin
on e4200.

In this build tested wl1 (didn't test wl0) is very unstable for my setup.
Reported Connection by Windows after a while drops down to 1 or 2 Mb/s and stays there.
Disconnecting and connecting again makes the connection speed 300Mbps, only to drop again after some time.

Doing a test with iperf shows moments of no transfer and an overall drop in maximum reached speeds.

Setup:
wl0 [2.4 GHz]
Wireless network Mode: G-Only
Channel:4
Tx Power: 20

wl1 [2.4/5 GHz]
Wireless network Mode: N-only (2.4Ghz)
Channel:13
Channel width: 40MHz
Extension Channel: upper
Tx Power: 45

Last stable wifi connections working on:
dd-wrt.v24-18024_NEWD-2_K2.6_big-nv60k.bin


was already broken on: dd-wrt.v24-18777_NEWD-2_K2.6_big-nv60k.bin

_________________
http://www.speedtest.net/result/3915993898.png

DO NOT 30-30-30 or erase nvram newer routers! It can brick them.

EA6700: Build 27745 (nvram below 32K, ipv6 - HE 6in4)
E4200: Build 26587
WRT54GL: Retired - waiting in the closet for an emergency.
Sjaakmat
DD-WRT Novice


Joined: 16 Feb 2013
Posts: 1

PostPosted: Sat Feb 16, 2013 16:16    Post subject: Reply with quote
Linksys E2000 flashed to dd-wrt.v24-20675_NEWD-2_K2.6_mini-e2000.bin

Very stable so far:

Uptime - 3 days, 15:23 without any PPPOE disconnects.

Load Average - 0.00, 0.02, 0.00

CPU OC'D from 345mhz > 480mhz.

The only thing I'm experiencing is 100% load when doing speedtests (connected to fiber modem, 100/100 line). During this time the web interface is unreachable. Is this normal ?

I'm pretty new to DD-WRT but loving it so far Very Happy
g3rew
DD-WRT Novice


Joined: 18 Jul 2012
Posts: 2

PostPosted: Mon Feb 18, 2013 12:46    Post subject: Re: Linksys WRT 610N v2 and 02-11-2013-r20675 build Reply with quote
pizzulicchio wrote:
My wrt 610N v2 seems to not be able to update to the latest dd-wrt.v24-20675_NEWD-2_K2.6_mega.bin or dd-wrt.v24-20675_NEWD-2_K2.6_big.bin

Image too big for partition: linux


Me too, on WRT610N V2 flash image size bigger about 7.75 MiB will NOT work. Release 20675 big+mega flash failed started from mini r20675, but STD_USB_NAS works.
BasCom
DD-WRT Guru


Joined: 29 Jul 2009
Posts: 1378
Location: Germany

PostPosted: Tue Feb 19, 2013 22:59    Post subject: Reply with quote
it still WONT work on RT-N66U with 64k nvram. grrr
_________________
RT-N66U @ Build 25697M K3.10.63
TL-WR842ND v1 @ BS-build 23919 WDS AP
TL-WR841ND @ BS-build 23919 WDS Client
TL-WR841ND @ BS-build 23919 Client Bridge ( Routed )
ddoobb
DD-WRT Novice


Joined: 03 Dec 2012
Posts: 1

PostPosted: Thu Feb 28, 2013 15:15    Post subject: Reply with quote
Thanks for start this thread!

A tp-link 841N v3 flashing using:
tl-wr841nd-webflash.bin (r20675)
the flashing procedure is ok and smooth.
But when I configure it, it got reboot error:

Once click "Administration -> reboot router" ,the router reboots, but does not coming back alive.
I check the led, the route is rebooted, but stuck at somewhere ,and the "sys" led is always on.
I had to re-plug the power cord to have it back online again.

This can replayed (I do test it for 4 times)

I reflash an older version which I had used for a long time,it is good.

Thanks for reading:)
rakstr
DD-WRT User


Joined: 12 Feb 2010
Posts: 65

PostPosted: Fri Mar 01, 2013 0:48    Post subject: Reply with quote
dd-wrt.v24-20675_NEWD-2_K2.6_mega
RT-N16

USB drive gets mounted twice as reported in some past revisions.

/dev/discs/disc0/part1 on /tmp/mnt/disc0_part1 type vfat (rw,fmask=0022,dmask=0022,codepage=cp437,iocharset=utf8)
/dev/discs/disc0/part1 on /tmp/mnt/disc0 type vfat (rw,fmask=0022,dmask=0022,codepage=cp437,iocharset=utf8)
gpzbc
DD-WRT Novice


Joined: 29 Mar 2009
Posts: 47
Location: Colorado, USA

PostPosted: Fri Mar 01, 2013 15:50    Post subject: Reply with quote
I tried to flash the std build on my wrt310N v1.0 and it seems to flash ok. But after I configure it and reboot my router, it is unresponsive and the blue power led is flashing. All I have to do to get it responsive again is a power cycle. But this is a pain the butt since I have it set to reboot on a regular basis.

I have tried reflashing it and also tried flashing the mini build and neither helped the situation.

_________________
the gpzbc
--
Asus RT-N16 running DD-WRT v24-sp2 (09/22/12) mega - build 20006
Linksys E2500 running Tomato Firmware 1.28.0000 MIPSR2-108 K26 USB Max
MongooseProXC
DD-WRT User


Joined: 24 May 2012
Posts: 235

PostPosted: Mon Mar 04, 2013 23:44    Post subject: Reply with quote
I installed build 20675 mini in my E1500. Noticed very high CPU usage common with all other Brainslayer builds. I reverted back to Eko's build 18946 which I had the most luck with.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum