Remove dd-wrt from restore original firmware eoc2610

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Senao Devices
Goto page Previous  1, 2
Author Message
no1madcow
DD-WRT Novice


Joined: 05 Nov 2009
Posts: 8

PostPosted: Thu Feb 04, 2010 1:01    Post subject: Reply with quote
Below is a copy of an e-mail request for help with this issue sent to the kind folks at Engenius Technologies. at the bottom of this post is a link to the file they sent to me that will resolve this issue.

Hello no1madcow,

Attached are instructions and files for flashing your device back to EnGenius firmware. Please be sure to pay attention to the parts of the instructions that are specific to your model device.

http://tellatech.net/downloads/EOC-2610%20tftp.zip


Thank you,

Jeriel Tenorio
FAE

Engenius Technologies, Inc.
1580 Scenic Avenue
Costa Mesa, CA 92626
www.engeniustech.com
Please visit our forum at www.engeniusforum.com

From: no1madcow
Sent: Wednesday, February 03, 2010 2:23 PM
To: support@engeniustech.com
Subject: HELP

I recently purchased several EOC-2610 Access point. client bridges and was talked into flashing them with DD-WRT firmware. This wound up being bad advice as there is no intelligent support available from DD-WRT. My question is, is it possible to reload the original EOC firmware on this device.

Please advise.

Thank you



http://tellatech.net/downloads/EOC-2610%20tftp.zip

please forgive the remark about"no intelligent support available from DD-WRT." it was mostly the rudness of the DD-WRT support staff that prompted that line as shown in this post
Quote:
Sash Posted: 05 Apr 2009 14:20 Post subject: Re: Firmaware Original EOC-2610

sorry but i dont give a shit fucking damn about shity OSWave instructions they mostly brick devices
All this person tried to do is help with the origional request for removing the DD-WRT software and according to Sash it is not possable, but the folks at at engenius say it is. You should really do something about Sash as he is giving your product a bad name

-no1madcow

by MOD
Quote:
You will receive no support on 3rd party instructions & software and for damaged/bricked routers resulting of it.
Sponsor
majinsoftware
DD-WRT User


Joined: 29 Jul 2008
Posts: 132

PostPosted: Thu Feb 04, 2010 3:25    Post subject: Reply with quote
Yeah it is posiable. I went from stock to gargoyle back to stock then to dd wrt.

Just the main thing is you leave it alone for a hour to do its thing. Most the bricks happen from people resetting the router before it done all the writing.

_________________
Asus WL-520GC R1.02 - DD-WRT 24-sp2 (09/30/09) micro-plus (SVN revision 13000M NEWD Eko)
&
Asus WL-520GU R1.01 - DD-WRT v24-sp2 (10/21/0Cool std (SVN revision 10550M NEWD Eko) With USB.
&
Eoc-2610 R1.1.13 - DD-WRT Pro v24-sp2 13972 (02/23/10) pro.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Thu Feb 04, 2010 10:08    Post subject: Reply with quote
BrainSlayer wrote:
there is a way to flash it back, but you need the original files, but senao does not provide them officially. i have access to these files, but i have no right to publish it

no1madcow wrote:


please forgive the remark about"no intelligent support available from DD-WRT." it was mostly the rudness of the DD-WRT support staff that prompted that line as shown in this post
Quote:
Sash Posted: 05 Apr 2009 14:20 Post subject: Re: Firmaware Original EOC-2610

sorry but i dont give a shit fucking damn about shity OSWave instructions they mostly brick devices
All this person tried to do is help with the origional request for removing the DD-WRT software and according to Sash it is not possable, but the folks at at engenius say it is. You should really do something about Sash as he is giving your product a bad name


show me where i claimed senao for something?!
if u cant understand what i wrote u should stay away from blaming other people

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
no1madcow
DD-WRT Novice


Joined: 05 Nov 2009
Posts: 8

PostPosted: Sun Feb 14, 2010 14:57    Post subject: Reply with quote
Sash wrote:
ATM there is no possible way to remove DD-WRT and get back to the Senao firmware!

I advise anyone that wants to remove the DD-WRT firmware from their device to contact the devices manufacture for instructions. The staff at DD-WRT has no intension to help you and will be counter productive in that effort, as shown in the quote above.

A simple e-mail to the support staff at EnGenius(Senao) was all it took to get the firmware, detailed instructions and the software necessary to restore the original firmware.
MichelG
DD-WRT Guru


Joined: 12 Feb 2007
Posts: 903
Location: Galati - RO / Kishinev - MD / Geneva - CH / Tarragona - E

PostPosted: Wed Feb 17, 2010 11:41    Post subject: Reply with quote
no1madcow wrote:
Sash wrote:
ATM there is no possible way to remove DD-WRT and get back to the Senao firmware!

I advise anyone that wants to remove the DD-WRT firmware from their device to contact the devices manufacture for instructions. The staff at DD-WRT has no intension to help you and will be counter productive in that effort, as shown in the quote above.

A simple e-mail to the support staff at EnGenius(Senao) was all it took to get the firmware, detailed instructions and the software necessary to restore the original firmware.


Hi no1madcow, it does several years I am on the forum, and many times, we have said "ATM it is not possible", for several situations, hardware, firmware, and finally it has been possible. Never forget that on the IT side, things move very fast, and what is true today, might not be anymore tomorrow.

It is interesting to have a solution that works if anyone wish to go back to senao firmware. Thanks for your time and support.

Now, Sash knows it is possible, and me too ;)

Cheers, Michel

_________________
2x EOC-2160 - AP 2x14dB Yagy to 450m link
2x EOC-2160 - RP 2x17dB Panels - 2x 7Mbps
1x WRT54G v2.2 - V24-SP2 13577VPN Eko
All Senao EOC-2610 V1.10 Std 15362 BS
1x UBNT Bullet 2 - RP 18dB Panel - 11Mbps - 13Km link
phibir
DD-WRT Novice


Joined: 19 Feb 2010
Posts: 30

PostPosted: Sat Feb 27, 2010 19:33    Post subject: Reply with quote
to roll back to original fw after dd-wrt - u should have:
1) terminal client (f.e. Putty)
2) tftp server (f.e. TFTPD32)
3) dump of original fw
4) USB data cable (f.e. from nokia cellulars)
eoc2611p
DD-WRT Novice


Joined: 05 Dec 2012
Posts: 23

PostPosted: Sat Feb 16, 2013 13:38    Post subject: Reply with quote
phibir wrote:
to roll back to original fw after dd-wrt - u should have:
1) terminal client (f.e. Putty)
2) tftp server (f.e. TFTPD32)
3) dump of original fw
4) USB data cable (f.e. from nokia cellulars)



Would it be possible to use a printer's cable (LTP1 DB25 ?) instead of the USB data cable ???
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum