EOC2611P Issues flashing firmware

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Senao Devices
Author Message
nafoibot
DD-WRT Novice


Joined: 28 Sep 2012
Posts: 3

PostPosted: Tue Dec 04, 2012 20:28    Post subject: EOC2611P Issues flashing firmware Reply with quote
15. Write bootscript into bootloader
RedBoot> fconfig boot_script true
boot_script: Setting to true

RedBoot> fconfig boot_script_data
boot_script_data:
Enter script, terminate with empty line
>>fis load -l linux
>>exec

This part I don't see show up when I type in the above script so am I doing something wrong?


Update RedBoot non-volatile configuration - continue (y/n)? y
... Erase from 0xa87e0000-0xa87f0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87e0000:
.
Sponsor
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Wed Dec 05, 2012 5:30    Post subject: Re: EOC2611P Issues flashing firmware Reply with quote
nafoibot wrote:

This part I don't see show up when I type in the above script so am I doing something wrong?

???

_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
nafoibot
DD-WRT Novice


Joined: 28 Sep 2012
Posts: 3

PostPosted: Wed Dec 05, 2012 17:53    Post subject: Reply with quote
nevermind, but I do have a new issue in the 2610 that I flashed and activated, I put the device into Bridge Route mode expecting the device to get the IP address but also have a lan side for the device.

The original Engenuis firmware does this but the DDWRT firmware doesnt? Or does it need to be in WDS?

I was hoping it could be used as a bridge router, then be able to plug a device into it.
Sash
DD-WRT Guru


Joined: 20 Sep 2006
Posts: 17638
Location: Hesse/Germany

PostPosted: Wed Dec 05, 2012 19:06    Post subject: Reply with quote
wiki: wds
_________________
Forum Guidelines...How to get help
&
Forum Rules
&
RTFM/STFW
&
Throw some buzzwords into the WIKI search Exclamation
_________________
I'm NOT rude, just offer pure facts!
_________________
Atheros (TP-Link & Clones, etc ) debrick service in EU
_________________
Guide on HowTo be Safe, Secure and Protect Your Online Anonymity!
eoc2611p
DD-WRT Novice


Joined: 05 Dec 2012
Posts: 23

PostPosted: Mon Feb 04, 2013 19:39    Post subject: Re: EOC2611P Issues flashing firmware Reply with quote
nafoibot wrote:

This part I don't see show up when I type in the above script so am I doing something wrong?



No you are doing it right, if you read up, it says "terminate with an empty line" so basically just click "enter" again (that would be as inserting an empty line's command) and you will get to the next step.

Have you been able to solve your issues yet?
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum