Posted: Mon Jan 21, 2013 17:27 Post subject: Revert WRT54G v3?
Is it possible to revert the v3 back to factory?
My issue is that when flashing the unit over to the 14896 build I clicked on the wrong file and did a "half flash" on the unit. Instead of clicking on the mini first I clicked on the std build. Now when I go to log into the unit all I get is the WRT change name and pass code but there is no options up at the top like there should be, such as,
Basic, Wireless, Status, ect... Everything at the top is blank.
I could not find a revert.bin or anything in that nature nor did I find anything via wiki.
tried to log into it from another browser and it worked.
Guess I just jumped the gun on that one...haha When I did the firmware upgrade from the linksys gui and clicked the wrong file, it had started the firmware update process but then failed about 45 seconds to a minute into it.
Just flashed it again to be on the safe side.
Thanks for the slap on the back of the head I needed to get back on point.
Posted: Sun Oct 03, 2021 15:34 Post subject: Re: browser
bunchham wrote:
dd-wrt blank
You need to provide much more information, but the easy answer is to not use Chrome.
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=325589
Set your user (normally 'admin') and password in edge (or IE or firefox, etc) and go on... _________________ #NAT/SFE/CTF: limited speed w/ DD#Repeater issues#DD-WRT info: FAQ, Builds, Types, Modes, Changes, Demo#
OPNsense x64 5050e ITX|DD: DIR-810L, 2*EA6900@1GHz, R6300v1, RT-N66U@663, WNDR4000@533, E1500@353,
WRT54G{Lv1.1,Sv6}@250|FreshTomato: F7D8302@532|OpenWRT: F9K1119v1, RT-ACRH13, R6220, WNDR3700v4
Joined: 08 May 2018 Posts: 14126 Location: Texas, USA
Posted: Sun Oct 03, 2021 17:11 Post subject:
And if this isn't on 47495 release, then it's likely also an issue that no longer exists. At least we know you can use the search function, so that's a plus