Wireless security WPA and WPA2 with AES does not work. I tried two equal units, one as WDS AP and the other as WDS Station. It is the same problem when I try to connect from a wireless client computer.
Been running this on my WZR-HP-G300NH for a few days. So far everything is good. I've noticed better signal quality and faster. I even lowered the TX power to 12.
One nagging issue is on my Android phones it still drops WiFi then immediately reconnects every hour or so. I've tried all the various settings I've found in different threads about the issue. Thing is my issue is different as it reconnects and still passes Internet traffic.
One thing I haven't tried is setting the Wi-Fi key renewal interval to 0. Currently at 3600. What do you think? _________________ WZR-HP-G300NH2, AO DO, FW: DD-WRT v24-sp2 (06/23/14) std - build 24461
All good on WZR-HP-G300NH, TFTP is the only way of updating now, webupgrade doesn't work since 20086 (it sits there with DIAG blinking 3 times).
Bandwidth graphs all working, and glad to see graphs for each interface. _________________ WZR-HP-G300NH [B0 B0]
WHR-G300N V1 (Ralink)
Last edited by Aveyer on Thu Jan 03, 2013 20:41; edited 1 time in total
Posted: Thu Jan 03, 2013 19:28 Post subject: Bug: TX antenna chains 1+2+3 missing!
Upgraded Linksys WRT160NL from 19519 succesful.
I am using it as a WAP (http://www.dd-wrt.com/wiki/index.php/Wireless_Access_Point), everyting is working well, but 1+2+3 TX ANTENNA CHAINS is missing!!! Disappointing....